Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
Summary:
There is logic in ELF loadimage() to relocate kernels, but currently
only type ET_EXEC. PowerPC kernels are ET_DYN, and can be relocated anywhere.
Add the load offset to kernel entry points on this platform.
Reviewed by: imp, ian
Differential Revision: https://reviews.freebsd.org/D21286
libsecureboot can tell us if the most recent file opened was
verfied or not.
If it's state is VE_UNVERIFIED_OK, skip if variable
matches one of the restricted prefixes.
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D20909
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
The D_PARTNONE is documented to make it possible to open raw MBR
partition, but the current disk_open() does not really implement this
statement.
The current code is checking partition against -1 (D_PARTNONE) but does
attempt to open partition table in case we do have FreeBSD MBR partition type.
Instead, we should check -2 (D_PARTWILD).
In case we do have MBR + BSD label, this code is only working because
by default, the first BSD partiton is created starting with relative sector
0, and we can still access the BSD table from that MBR slice.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20501
* Fix boot env back compat
zfsboot must try zfsloader before loader in order to remain compatible
with boot environments created prior to zfs functionality being rolled
into loader proper.
* Improve comments in zfsboot
Explain the significance of the load path order, and put the comment
about looping through the paths in the appropriate scope.
Obtained From: TrueNAS commit 4c60c62fcf0b6b6eac98ee8d46e7bbea64bc86f5
Submitted by: Ryan Moeller <ryan@freqlabs.com>
loader.rc has comment lines without a trailing space, which get
interpreted as commands. Avoid this by only matching against the
backslash character.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D20491
This adds some new commands to loader :
- pnpmatch
This takes a pnpinfo string as argument and tries to find a kernel module
associated with it. -v and -d option are available and are the same as in
devmatch (v is verbose, d dumps the hints).
- pnpload
This takes a pnpinfo string as argument and tries to load a kernel module
associated with it.
- pnpautoload
This will attempt to load every kernel module for each buses. Each buses are
probed, the probe function will generate pnpinfo string and load kernel module
associated with it if it exists.
Only simplebus for FDT system is implemented for now.
Since we need the dtb and overlays to be applied before searching the tree
fdt_devmatch_next will load and apply the dtb + overlays.
All the pnp parsing code comes from devmatch and is the same at 99%.
Reviewed by: imp, kevans
Differential Revision: https://reviews.freebsd.org/D19498
This change properly terminates the formatting string quote modification done
in r348005, which is triggered when `ELF_VERBOSE` is defined.
MFC with: r348005
Reported by: ci (amd64, gcc)
file_loadraw():
check for file_alloc() and strdup() results.
we leak 'name'.
mod_load() does leak 'filename'.
mod_loadkld() does not need to check fp, file_discard() does check.
Since the partition/slice names do vary in length, check the length
of the fixed part of the line against 3 * 8, if the lenth is less than
3 tab stops, print out extra tab.
use snprintf() instead of sprintf.
The bug and patch is reported against 11.2, but it is good idea to have
the check in place for all versions.
PR: 236585
Submitted by: john@feith.com
Reported by: john@feith.com
MFC after: 1 day
These three cases dovetail with other places in the code where we use
or set D_PARTISGPT when we mean that the partitioning scheme is
GPT. Use this #define to make the code easier to undertand.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20122
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
The disk_open() function searches for "the best partition" when slice and
partition information is not provided as part of the device name. As of
r345477 the slice and partition fields of a disk_devdesc are initialized to
D_SLICEWILD and D_PARTWILD; in the past they were initialized to -1, which
was sometimes interpreted as meaning 'wildcard' and sometimes as 'open the
raw partition' depending on the context. So as an unintended side effect of
r345477 it became basically impossible to ever open a disk or partition
without doing the 'best partition' search. One visible effect of that was
the inability to open the raw disk to read the partition table correctly in
zfs_probe_dev(), leading to failures to find the zfs pool unless it was on
the first partition.
Now instead of always initializing slice and partition to wildcards, the
disk_parsedev() function initializes them based on the presence of a
path/file name following the device. If there is any path or filename
following the ':' that ends the device name, then slice and partition are
initialized to D_SLICEWILD and D_PARTWILD. If there is nothing after the
':' then it is considered to be a request to open the raw device or
partition itself (not a file stored within it), and the fields are
initialized to D_SLICENONE and D_PARTNONE.
With this change in place, all the tests in src/tools/boot are succesful
again, including the recently-added cases of booting from a zfs pool on
a partition other than slice 1 of the device.
PR: 236981
346002 did miss the fact that we do not only undo the loadaddr, but also
we need to remove the inserted module. Implement file_remove() to do the job.
MFC after: 1w
The last_file variable is used to reset the loadaddr variable back to original
value; however, it is possible the last_file is NULL, so we can not blindly
trust it. But then again, we can just save the original loadaddr and use
the saved value for recovery.
MFC after: 1w
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
The loader indended to search the kernel file name (only) for . but
instead searched the entire path, so paths like
"boot/test.elfv2/kernel" would not work.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19658
During initialization of the forth interpreter
the loader looks for "/boot/boot.4th"
and executes any code found there.
That file was loaded bypassing verification.
Add a call to verify_file to change that.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Some of these files using <FOO>_DEBUG defined a DEBUG() macro to serve as a
debug-printf. -DDEBUG is useful to enable some debugging output across
multiple ELF/common parts, so switch the DEBUG-as-printf macros over to
something more like DPRINTF that is more commonly used for this kind of
thing and less likely to conflict.
userboot/elf64_freebsd debugging also assumed %llx for uint64; use PRIx64
instead.
MFC after: 1 week
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
the size field and a tab between the partition type and the size.
Changes this
disk devices:
disk0 (MMC)
disk0s1: DOS/Windows 49MB
disk0s2: FreeBSD 14GB
disk0s2a: FreeBSD UFS 14GB
disk0s2b: Unknown 2048KB
disk0s2d: FreeBSD UFS 2040KB
to this
disk devices:
disk0 (MMC)
disk0s1: DOS/Windows 49MB
disk0s2: FreeBSD 14GB
disk0s2a: FreeBSD UFS 14GB
disk0s2b: Unknown 2048KB
disk0s2d: FreeBSD UFS 2040KB
I'm pretty sure this used to work at one time, perhaps long ago. It has
been failing recently because if you call disk_open() with dev->d_partition
set to -1 when d_slice refers to a bsd slice, it assumes you want it to
open the first partition within that slice. When you then pass that open
dev instance to ptable_open(), it tries to read the start of the 'a'
partition and decides there is no recognizable partition type there.
This restores the old functionality by resetting d_offset to the start
of the raw slice after disk_open() returns. For good measure, d_partition
is also set back to -1, although that doesn't currently affect anything.
I would have preferred to make disk_open() avoid such rude assumptions and
if you ask for partition -1 you get the raw slice. But the commit history
shows that someone already did that once (r239058), and had to revert it
(r239232), so I didn't even try to go down that road.
net_open previously casted the first vararg to a char * and this was
half-OK: at first, it is passed to netif_open, which would cast it back to
the struct devdesc * that it really is and use it properly. It is then
strdup()d and used as the netdev_name, which is objectively wrong.
Correct it so that the first vararg is properly casted to a struct devdesc *
and the netdev_name gets set properly to make it more clear at a glance that
it's not doing something horribly wrong.
Reported by: mmel
Reviewed by: imp, mmel, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19206
the malloc()/free() as well as having potential of softening the handling
in case error is detected down to a mere warning as compared to hard panic
in free().
Submitted by: tsoome
Differential Revision: https://reviews.freebsd.org/D18299
The ptable_*read() functions return NULL on read errors (and partition table
closed as an side effect). The ptable_open must check the return value and
act properly.
PR: 232483
Reported by: lev
Reviewed by: lev,cem
Differential Revision: https://reviews.freebsd.org/D17890
The disk access is validated by using partition table definitions, therefore
we have no need for if statements, just set the disk size.
Of course the partition table itself may be incorrect/inconsistent, but if
so, we are in trouble anyhow.
Differential Revision: https://reviews.freebsd.org/D17822