Commit Graph

103 Commits

Author SHA1 Message Date
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Kenjiro Cho
fec4b7015e clean up the en driver since it will survice for a while by
Harti Brandt's effort.
remove the DMA test to detect problems of the first generation PCI chipsets
back in 1998.
it is no longer needed and has been the source of the false alarm that
the driver uses too much stack space.
2003-03-12 10:28:26 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
9967cafc49 Correct mbuf packet header propagation. Previously, packet headers
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a  "copy" operation.  This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain.  This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.

These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block.  This
introduces an incompatibility with openbsd which we may want to revisit.

Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them.  We may want to support this;
for now we watch for it with an assert.

Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.

Supported by:	Vernier Networks
Reviewed by:	Robert Watson <rwatson@FreeBSD.org>
2002-12-30 20:22:40 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Poul-Henning Kamp
61ddb5c9d7 Rename "struct device" to "struct midway_device" to avoid clashing
with newbus.
2002-09-28 21:59:59 +00:00
Brooks Davis
6f9fe1334f Don't include "bpf.h" when compiling on FreeBSD. We always compile in
bpf support these days.
2002-09-06 20:07:50 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Bosko Milekic
8bcbe4b7a6 Change check for existence of mbuf->m_ext.ext_free to check of new ext_type
in order to determine whether the ext_buf is a cluster, or some other type
of storage.

Reviewed by: jlemon
2000-11-11 23:01:44 +00:00
Kenjiro Cho
41b4d8d540 restore the freebsd local type-cast fixes that I mistakenly removed
in the previous commit while attempting to sync with netbsd.

Pointed out by: bde
(never thought of compiling i386's LINT with -64-bit-longs...)
2000-11-08 05:45:46 +00:00
Kenjiro Cho
44b5247d95 newbusify the en atm driver. 2000-11-07 09:31:28 +00:00
Kenjiro Cho
da33d58137 newbusify the en atm driver.
also
 - sync with netbsd
 - fix a bug that miscalculates tx cell counts when the pointer size isn't 4

tested both ENI and Adaptec cards on both i386 and alpha.
2000-11-07 09:30:14 +00:00
Bruce Evans
f18c4450ac Added used include of <machine/bus.h> -- don't depend on evil namespace
pollution in <sys/mutex.h>.  This was half fixed in rev.1.3 of
midwayreg.h.  The pollution exposed the bug that this driver was using
toy versions of the bus space macros under FreeBSD.  Disabling the
toy versions made this driver compile but dependent on the pollution.
There was still a toy version of bus_space_read_1() in unreachable code.
2000-11-04 15:03:34 +00:00
Bruce Evans
442ed3a3c4 Enabled the used include of <machine/bus.h> -- don't depend on evil
namespace pollution in <sys/mutex.h>.  This was half fixed in rev.1.3
of midwayreg.h.  The pollution exposed the bug that this driver was
using toy versions of the bus space macros under FreeBSD.  Disabling
the toy versions made this driver compile and maybe support PIO space,
but dependent on the pollution.
2000-11-04 14:31:47 +00:00
Poul-Henning Kamp
53ce36d17a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
Poul-Henning Kamp
41f7aa55ba Make LINT compile again. 2000-10-22 16:09:12 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
David Malone
a5c4836d39 Replace the mbuf external reference counting code with something
that should be better.

The old code counted references to mbuf clusters by using the offset
of the cluster from the start of memory allocated for mbufs and
clusters as an index into an array of chars, which did the reference
counting. If the external storage was not a cluster then reference
counting had to be done by the code using that external storage.

NetBSD's system of linked lists of mbufs was cosidered, but Alfred
felt it would have locking issues when the kernel was made more
SMP friendly.

The system implimented uses a pool of unions to track external
storage. The union contains an int for counting the references and
a pointer for forming a free list. The reference counts are
incremented and decremented atomically and so should be SMP friendly.
This system can track reference counts for any sort of external
storage.

Access to the reference counting stuff is now through macros defined
in mbuf.h, so it should be easier to make changes to the system in
the future.

The possibility of storing the reference count in one of the
referencing mbufs was considered, but was rejected 'cos it would
often leave extra mbufs allocated. Storing the reference count in
the cluster was also considered, but because the external storage
may not be a cluster this isn't an option.

The size of the pool of reference counters is available in the
stats provided by "netstat -m".

PR:		19866
Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
Reviewed by:	alfred (glanced at by others on -net)
2000-08-19 08:32:59 +00:00
Warner Losh
d0d3b8345b Ahhrggg. Put the test for the compat shims AFTER the file that includes
them.

Pointed out by: bde
2000-03-27 20:24:02 +00:00
Warner Losh
76fbc068b8 Per conversations in -current, add #error to these drivers when you don't
have the right compatibility shims enabled.  ISA drivers to follow later.
2000-03-27 18:32:45 +00:00
Peter Wemm
5c5ea07fc6 Remove #if NEN > 0 in the name of FreeBSD - it's not required as config
only compiles this file if it's true.  NEN is still used though. :-(
2000-01-29 14:38:04 +00:00
Poul-Henning Kamp
56b5b87171 remove unused #include, add $FreeBSD$ 1999-10-11 19:14:37 +00:00
Mike Smith
3ed7a59b07 Clean up after removing sys/eventhandler.h from sys/systm.h at the last
minute.  This should cover all of the missed cases (and should let LINT
build again).
1999-08-21 22:10:49 +00:00
Mike Smith
fcb893a801 Implement a new generic mechanism for attaching handler functions to
events, in order to pave the way for removing a number of the ad-hoc
implementations currently in use.

Retire the at_shutdown family of functions and replace them with
new event handler lists.

Rework kern_shutdown.c to take greater advantage of the use of event
handlers.

Reviewed by:	green
1999-08-21 06:24:40 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Peter Wemm
9929d2a045 Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files.  config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
Peter Wemm
35ce6c413e Missing revision markers. 1999-05-09 17:12:25 +00:00
Peter Wemm
579f45fa60 Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00
Kenjiro Cho
0ce8bd9571 clean up en atm driver
o fix DDB support
   - include "opt_ddb.h"
   - fix Debugger() arg
   pointed out by bde

 o back out pvc shadow interface support
   - it is currently not used
   - to make it easier to merge another implementation

 o misc minor cleanup
1999-05-08 14:23:40 +00:00
Peter Wemm
bbdc01224f Undo excess staticization - these two are meant to be callable from
DDB.
1999-05-06 22:19:38 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Peter Wemm
96b3554e5c Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
Eivind Eklund
505ab9b86b Staticize. 1999-04-11 02:55:52 +00:00
Matthew Dillon
b4e36adf1c Fix warnings preparing for -Wall -Wcast-qual
Also disable one usb module in LINT due to fatal compilation errors,
    temporary.
1999-01-27 20:09:21 +00:00
Kenjiro Cho
1e7bb3a362 cleanup: remove part of the code for 2.1.
add two functions to get the MAC address of the card.

Obtained from: ALTQ
1999-01-09 12:56:17 +00:00
Matthew Dillon
2cbe36f725 probe function changed from returning char * to const char *. 1998-12-14 06:37:37 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Kenjiro Cho
513bc54fe0 fix a bug which could lock up a transmitter.
don't use the entire buffer space.  if WRTX becomes equal
to RDTX, the transmitter stops assuming the buffer is empty.
1998-10-09 11:48:22 +00:00
Bruce Evans
5afd0041c5 FIxed printf format errors. Most of them were exposed by our ntohl()
returning long.  There would be many more if int_32_t were not int.
1998-08-17 00:08:07 +00:00
Bruce Evans
86a14a7a0a Use [u]intptr_t instead of [u_]long for casts between pointers and
integers.  Don't forget to cast to (void *) as well.
1998-08-16 01:21:52 +00:00
Kenjiro Cho
4f53e3cc7a update ATM driver. (base version: midway.c 1.67 --> 1.68)
several new features are added:
	- support vc/vp shaping
	- support pvc shadow interface

code cleanup:
	- remove WMAYBE related code.  ENI WMAYBE DMA doen't work.
	- remove updating if_lastchange for every packet.
	- BPF related code is moved to midway.c as it should be.
	  (bpfwrite should work if atm_pseudohdr and LLC/SNAP are
	  prepended.)
	- BPF link type is changed to DLT_ATM_RFC1483.
	  BPF now understands only LLC/SNAP!! (because bpf can't
	  handle variable link header length.)
	  It is recommended to use LLC/SNAP instead of NULL
	  encapsulation for various reasons.  (BPF, IPv6,
	  interoperability, etc.)

the code has been used for months in ALTQ and KAME IPv6.

OKed by phk long time ago.
1998-07-29 05:35:16 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Bruce Evans
c1087c1324 Support compiling with `gcc -ansi'. 1998-04-15 17:47:40 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Eivind Eklund
e0d781f3a5 Make POWERFAIL_NMI, PPS_SYNC and NATM new style options.
This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Bruce Evans
55b211e3af Removed unused #includes. 1997-10-28 15:59:26 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Bruce Evans
958aaa7ef3 Removed unused #includes. 1997-06-14 13:56:12 +00:00
Kenjiro Cho
413fe3928f import Chuck Cranor's ATM driver 1997-05-09 07:48:14 +00:00