Make the ena_adapter::num_io_queues a number of effectively used IO
queues. While the ena_adapter::max_num_io_queues is an upper-bound
specified by the HW, the ena_adapter::num_io_queues may be lower than
that, depending on runtime system resources availability.
On reset, there are called ena_destroy_device() and then
ena_restore_device(). The latter calls, in turn, ena_enable_msix(),
which will attempt to re-acquire ena_adapter::max_num_io_queues of
MSIX vectors again.
Thus, the value of ena_adapter::num_io_queues may be different before
and after reset. For this reason, free the IO rings structures (drbr,
counters) in ena_destroy_device() and allocate again in
ena_restore_device().
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This method has been aligned with the way how the Rx queue size is being
updated - so it's now done synchronously instead of resetting the
device.
Moreover, the input parameter is now being validated if it's a power of
2. Without this, it can cause kernel panic.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This patch reworks how the Rx queue size is being reconfigured and how
the information from the device is being processed.
Reconfiguration of the queues and reset of the device in order to make
the changes alive isn't the best approach. It can be done synchronously
and it will let to pass information if the reconfiguration was
successful to the user. It now is done in the ena_update_queue_size()
function.
To avoid reallocation of the ring buffer, statistic counters and the
reinitialization of the mutexes when only new size has to be assigned,
the io queues initialization function has been split into 2 stages:
basic, which is just copying appropriate fields and the advanced, which
allocates and inits more advanced structures for the IO rings.
Moreover, now the max allowed Rx and Tx ring size is being kept
statically in the adapter and the size of the variables holding those
values has been changed to uint32_t everywhere.
Information about IO queues size is now being logged in the up routine
instead of the attach.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Recent changes to the epoch requires driver to notify that they knows
epoch in order to prevent input packet function to enter epoch each
time the packet is received.
ENA is using NET_TASK for handling Rx, so it's entering epoch
automatically whenever this task is being executed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the conditional check for ENA_FLAG_DEV_UP is negated, the body of the
function can have smaller indentation and it makes the code cleaner.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As functions which are declared in the header files are intended to be
the interface and are going to be used by other files, it's better to
include argument names in the definition, so the caller won't have to
check the .c file in order to check their meaning and order.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Currently, the driver had 2 global locks - one was sx lock used for
up/down synchronization and the second one was mutex, which was used
for link configuration and timer service callout.
It is better to have single lock for that. We cannot use mutex, as it
can sleep and cause witness errors in up/down configuration, so sx lock
seems to be the only choice.
Callout cannot use sx lock, but the timer service is MP safe, so we just
need to avoid race between ena_down() and ena_detach(). It can be
avoided by acquiring sx lock.
Simple macros were added that are encapsulating implementation of the
lock and makes the code cleaner.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the reset triggering is no longer a simple macro that was just
setting appropriate flag, the new function for triggering reset was
added. It improves code readability a lot, as we are avoiding additional
indentation.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The function ena_enable_msix_and_set_admin_interrupts takes two
arguments while the second is not used and so can be spared. This is a
static function, only ena.c is affected.
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Tx drops statistics are fetched from HW every ena_keepalive_wd() call
and are observable using one of the commands:
* sysctl dev.ena.0.hw_stats.tx_drops
* netstat -I ena0 -d
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
* Removed adaptive interrupt moderation (not suported on FreeBSD).
* Use ena_com_free_q_entries instead of ena_com_free_desc.
* Don't use ENA_MEM_FREE outside of the ena_com.
* Don't use barriers before calling doorbells as it's already done in
the HAL.
* Add function that generates random RSS key, common for all driver's
interfaces.
* Change admin stats sysctls to U64.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ha_lso is a listening socket (unless bind() has failed), so should use
solisten_upcall_set(NULL, NULL), not soupcall_clear().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This version of the HAL supports newest generation ENA HW, random
RSS generation upon device initialization and also includes bug fixes
in the platform file, like fix for IO write/read macros regarding using
barriers.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
r361390 decreased blocksize of AES-CTR from 16 to 1.
Because of that ESP payload is no longer aligned to 16 bytes
before being encrypted and sent.
This is a good change since RFC3686 specifies that the last block
doesn't need to be aligned.
Since FreeBSD before r361390 couldn't decrypt partial blocks encrypted
with AES-CTR we need to enforce 16 byte alignment in order to preserve
compatibility.
Add a sysctl(on by default) to control it.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D24999
r347343 split generic xhci driver into three files.
Include generic_xhci_fdt.c when building kernel for Armada SoCs.
This brings back XHCI support on these platforms and also
others, which use GENERIC config.
Submitted by: Kornel Duleba
Obtained from: Semihalf
MFC after: 1 week
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D24944
There was an off-by-one in the GDT descriptor size field used by the
early Xen boot code. The GDT descriptor size should be the size of the
GDT minus one. No functional change expected as a result of this
change.
Sponsored by: Citrix Systems R&D
Kernel page tables actually start at index 4096, given kernel base address
of 0xc008000000000000, not index 0, which would yield 0xc000000000000000.
Fix this by indexing at the real base, instead of the assumed base.
This is a correctness fix needed to enable the ifunc conversion of the pmap
in D24993.
Since we are making function calls that may need to go through the PLT, ensure
r30 is set up correctly.
This fixes crashes when booting with D24993 applied.
Reviewed by: jhibbits (in IRC)
Sponsored by: Tag1 Consulting, Inc.
the underlying media fails or becomes inaccessible. For example
when a USB flash memory card hosting a UFS filesystem is unplugged.
The strategy for handling disk I/O errors when soft updates are
enabled is to stop writing to the disk of the affected file system
but continue to accept I/O requests and report that all future
writes by the file system to that disk actually succeed. Then
initiate an asynchronous forced unmount of the affected file system.
There are two cases for disk I/O errors:
- ENXIO, which means that this disk is gone and the lower layers
of the storage stack already guarantee that no future I/O to
this disk will succeed.
- EIO (or most other errors), which means that this particular
I/O request has failed but subsequent I/O requests to this
disk might still succeed.
For ENXIO, we can just clear the error and continue, because we
know that the file system cannot affect the on-disk state after we
see this error. For EIO or other errors, we arrange for the geom_vfs
layer to reject all future I/O requests with ENXIO just like is
done when the geom_vfs is orphaned. In both cases, the file system
code can just clear the error and proceed with the forcible unmount.
This new treatment of I/O errors is needed for writes of any buffer
that is involved in a dependency. Most dependencies are described
by a structure attached to the buffer's b_dep field. But some are
created and processed as a result of the completion of the dependencies
attached to the buffer.
Clearing of some dependencies require a read. For example if there
is a dependency that requires an inode to be written, the disk block
containing that inode must be read, the updated inode copied into
place in that buffer, and the buffer then written back to disk.
Often the needed buffer is already in memory and can be used. But
if it needs to be read from the disk, the read will fail, so we
fabricate a buffer full of zeroes and pretend that the read succeeded.
This zero'ed buffer can be updated and written back to disk.
The only case where a buffer full of zeros causes the code to do
the wrong thing is when reading an inode buffer containing an inode
that still has an inode dependency in memory that will reinitialize
the effective link count (i_effnlink) based on the actual link count
(i_nlink) that we read. To handle this case we now store the i_nlink
value that we wrote in the inode dependency so that it can be
restored into the zero'ed buffer thus keeping the tracking of the
inode link count consistent.
Because applications depend on knowing when an attempt to write
their data to stable storage has failed, the fsync(2) and msync(2)
system calls need to return errors if data fails to be written to
stable storage. So these operations return ENXIO for every call
made on files in a file system where we have otherwise been ignoring
I/O errors.
Coauthered by: mckusick
Reviewed by: kib
Tested by: Peter Holm
Approved by: mckusick (mentor)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24088
- When -z is used, include small buffers from 1 to 32 bytes to test
stream ciphers. Note that while AES-XTS claims to support a block
size of 1 in OpenSSL, it does require a minimum of 1 block of cipher
text as it is not a stream cipher but depends on CTS to pad out the
final partial block.
- Permit multiple AAD sizes to be set via multiple -A options, or via
-z. When -z is set, use small buffers from 0 to 32 bytes followed
by powers of 2 up to 256. When multiple sizes are specified, the
ETA and AEAD algorithms perform the full matrix of AAD sizes by
payload sizes.
- Only warn on unchanged ciphertext instead of erroring. The
currently generated plaintext and key for a couple of AES-CTR tests
with a buffer size of 1 results in ciphertext that matches the
plaintext.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25006
Although I added the reset type field to ath_hal_reset() years ago,
I never finished adding it both throughout the HALs and in if_ath.c.
This will eventually deprecate the ath_hal force_full_reset option
because it can be requested at the driver layer.
So:
* Teach ar5416ChipReset() and ar9300_chip_reset() about the HAL type
* Use it in ar5416Reset() and ar9300_reset() when doing a full chip reset
* Extend ath_reset() to include the HAL_RESET_TYPE parameter added in the above functions
* Use HAL_RESET_NORMAL in most calls to ath_reset()
* .. but use HAL_RESET_BBPANIC for the BB panics, and HAL_RESET_FORCE_COLD during fatal, beacon miss and other hardware related hangs.
This should be a glorified no-op outside of actual hardware issues.
I've tested things with ath_hal force_full_reset set to 1 for years now,
so I know that feature and a full reset works (albeit much slower than
a warm reset!) and it does unwedge hardware.
The eventual aim is to use this for all the places where the driver
detects a potential hang as well as if long calibration - ie, noise floor
calibration - fails to complete. That's one of the big hardware related
things that causes station mode operation to hang without easy recovery.
Differential Revision: https://reviews.freebsd.org/D24981
The backend routines aesni(4) call for specific encryption modes all
expect virtually contiguous input/output buffers. If the existing
output buffer is virtually contiguous, always write to the output
buffer directly from the mode-specific routines. If the output buffer
is not contiguous, then a temporary buffer is allocated whose output
is then copied to the output buffer. If the input buffer is not
contiguous, then the existing buffer used to hold the input is also
used to hold temporary output.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
This is a testing aid to permit using testing a driver's support of
separate output buffers via cryptocheck.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
Implement support for AHCI controller found in
NXP QorIQ Layerscape SoCs.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24466
This patch introduces support for Epson RX-8803 RTC controller accessible
over I2C bus. It has a resolution of 1 sec.
Support for interrupt based alarm was not implemented.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24364
Add basic TCA6416 GPIO expander support over I2C bus. The driver handles
enabling and disabling pins, setting pin mode to IN and OUT and
toggling the pins. External interrupts are not supported.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24363
NXP LS1046A contains I2C controller compatible with Vybrid VF610.
Existing Vybrid MVF600 driver can be used to support it. For that purpose
declare driver as ofw_iicbus and add methods associated with ofw_iicbus.
For VF610 add dynamic clock prescaler calculation using clock information
from clock driver and clock frequency requested in device tree.
On the occasion add detach function and add additional error handling
in i2c_attach function.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24361
This patch adds a GPIO controller support targeted for NXP LS1046A
SoC. The driver implements the following features:
* setting direction of each pin (IN or OUT)
* setting the mode of output pins (PUSHPULL or OPENDRAIN)
* setting the state of each output pin (1 or 0)
* reading the state of each input pin (1 or 0)
Submitted by: Kamil Koczurek <kek@semihalf.com>
Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24353
Driver provides probe and attach functions for LS1046A clockgen and passes
configuration information to QorIQ clockgen class. It may be used as
a reference implementation for different QorIQ clockgen devices.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel, manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24352
This patch adds classes and functions that can be used with various NXP
QorIQ Layerscape SoCs.
As for the clock topology - there is single platform PLL, which supplies
clocks for the peripheral bus and additional PLLs for CPU cores. There
can be multiple core PLLs (For example - LS1046A has two PLLs - CGAPLL1
and CGAPLL2). Each PLL has fixed dividers on output. The core PLLs
are not accessible from dts.
This is a preparation patch for NXP LS1046A SoC support.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24351
mod_timer is supposed to return 1 if the modified timer was pending, which
is exactly what callout_reset does so return the value after checking
that it's a correct one in case the api change.
del_timer_sync returns int so add a function and handle that.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D24983
Implement some refcount functions needed by drm.
Just use the atomic_t struct and functions from linuxkpi for simplicity.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselsasky
Differential Revision: https://reviews.freebsd.org/D24985
The same_type macro simply wraps around builtin_types_compatible_p which
exist for both GCC and CLANG, which returns 1 if both types are the same.
The __must_be_array macros returns 1 if the argument is an array.
This is needed for DRM v5.3
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D24953
For TLS v1.3 the 12 bytes of the initial vector, IV, should just be copied
as-is from the kernel to the gcm_iv field, which hold the first 4 bytes,
and the remaining 8 bytes go to the subsequent implicit_iv field.
There is no need to consider the byte order on the 12 bytes of IV like
initially done.
Sponsored by: Mellanox Technologies
