Commit Graph

32 Commits

Author SHA1 Message Date
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Alexander Motin
e40d8dbbcb Make cam_error_print() decode NVMe commands.
MFC after:	2 weeks
2019-04-02 19:37:52 +00:00
Pedro F. Giffuni
bec9534d1d sys/cam: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:12:43 +00:00
Alan Somers
e7dda951a4 Fix uninitialized variable from 326034
Reported by:	Coverity
CID:		1382887
MFC after:	20 days
X-MFC-With:	326034
Sponsored by:	Spectra Logic Corp
2017-11-21 16:38:30 +00:00
Alan Somers
8a0a413e12 Fix multiple bugs in cam_strmatch
* Wrongly matches strings that are shorter than the pattern
* Fails to match negative character sets
* Fails to match character sets that aren't at the end of the pattern
* Fails to match character ranges

Reviewed by:	imp
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D13173
2017-11-20 22:01:45 +00:00
Warner Losh
3f04cc100f Improve the pattern matching so that internal *'s work, as well as
[set] notation. This fixes pattern matching for recently added drives
that would set the NCQ Trim being broken incorrectly.

PR: 210686
Tested-by: Tomoaki AOKI
MFC After: 3 days
2016-08-19 04:30:29 +00:00
Pedro F. Giffuni
8dfea46460 Remove slightly used const values that can be replaced with nitems().
Suggested by:	jhb
2016-04-21 15:38:28 +00:00
Scott Long
c9767ca834 Add sbuf variants ata_cmd_sbuf() and ata_res_sbuf(), and reimplement the
_string variants on top of this.  This requires a change to the function
signature of ata_res_sbuf().  Its use in the tree seems to be very limited,
and the change makes it more consistent with the rest of the API.

Reviewed by:	imp, mav, kenm
Sponsored by:	Netflix
Differential Revision:	D5940
2016-04-13 20:10:06 +00:00
Kenneth D. Merry
5672fac935 Add support for reading MAM attributes to camcontrol(8) and libcam(3).
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.

This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.

libsbuf/Makefile:
	Add subr_prf.c for the new sbuf_hexdump() function.  This
	function is essentially the same function.

libsbuf/Symbol.map:
	Add a new shared library minor version, and include the
	sbuf_hexdump() function.

libsbuf/Version.def:
	Add version 1.4 of the libsbuf library.

libutil/hexdump.3:
	Document sbuf_hexdump() alongside hexdump(3), since it is
	essentially the same function.

camcontrol/Makefile:
	Add attrib.c.

camcontrol/attrib.c:
	Implementation of READ ATTRIBUTE support for camcontrol(8).

camcontrol/camcontrol.8:
	Document the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.c:
	Add the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.h:
	Add a function prototype for scsiattrib().

share/man/man9/sbuf.9:
	Document the existence of sbuf_hexdump() and point users to
	the hexdump(3) man page for more details.

sys/cam/scsi/scsi_all.c:
	Add a table of known attributes, text descriptions and
	handler functions.

	Add a new scsi_attrib_sbuf() function along with a number
	of other related functions that help decode attributes.

	scsi_attrib_ascii_sbuf() decodes ASCII format attributes.

	scsi_attrib_int_sbuf() decodes binary format attributes, and
	will pass them off to scsi_attrib_hexdump_sbuf() if they're
	bigger than 8 bytes.

	scsi_attrib_vendser_sbuf() decodes the vendor and drive
	serial number attribute.

	scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
	Information attribute that LTFS writes out.

sys/cam/scsi/scsi_all.h:
	Add a number of attribute-related structure definitions and
	other defines.

	Add function prototypes for all of the functions added in
	scsi_all.c.

sys/kern/subr_prf.c:
	Add a new function, sbuf_hexdump().  This is the same as
	the existing hexdump(9) function, except that it puts the
	result in an sbuf.

	This also changes subr_prf.c so that it can be compiled in
	userland for includsion in libsbuf.

	We should work to change this so that the kernel hexdump
	implementation is a wrapper around sbuf_hexdump() with a
	statically allocated sbuf with a drain.  That will require
	a drain function that goes to the kernel printf() buffer
	that can take a non-NUL terminated string as input.
	That is because an sbuf isn't NUL-terminated until it is
	finished, and we don't want to finish it while we're still
	using it.

	We should also work to consolidate the userland hexdump and
	kernel hexdump implemenatations, which are currently
	separate.  This would also mean making applications that
	currently link in libutil link in libsbuf.

sys/sys/sbuf.h:
	Add the prototype for sbuf_hexdump(), and add another copy
	of the hexdump flag values if they aren't already defined.

	Ideally the flags should be defined in one place but the
	implemenation makes it difficult to do properly.  (See
	above.)

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2015-06-09 21:39:38 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Steven Hartland
5f83aee5e5 Adds the ability to enable / disable sorting of BIO requests queued within
CAM. This can significantly improve performance particularly for SSDs
which don't suffer from seek latencies.

The sysctl / tunable kern.cam.sort_io_queues provides the systems default
setting where:-
0 = queued BIOs are NOT sorted
1 = queued BIOs are sorted (default)

Each device gets its own sysctl kern.cam.<type>.<id>.sort_io_queue
Valid values are:-
-1 = use system default (default)
0 = queued BIOs are NOT sorted
1 = queued BIOs are sorted

Note: Additional patch will look to add automatic use of none sorted queues
for none rotating media e.g. SSD's

Reviewed by:	scottl
Approved by:	pjd (mentor)
MFC after:	2 weeks
2013-03-29 22:58:15 +00:00
Alexander Leidinger
de5b19526b Add some FEATURE macros for various features (AUDIT/CAM/IPC/KTR/MAC/NFS/NTP/
PMC/SYSV/...).

No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.

Sponsored by:   Google Summer of Code 2010
Submitted by:   kibab
Reviewed by:    arch@ (parts by rwatson, trasz, jhb)
X-MFC after:    to be determined in last commit with code from this project
2011-02-25 10:11:01 +00:00
Kenneth D. Merry
06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
Benedict Reuschling
104fad2860 Fix two (very common) occurrences of s/sytem/system in comments.
Approved by:    mav
MFC after:      3 days
2010-08-02 18:06:49 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
30a4094f86 MFp4:
- Move tagged queueing control from ADA to ATA XPT. It allows to control
  device command queue length correctly. First step to support < 32 tags.
- Limit queue for non-tagged devices by 2 slots for ahci(4) and siis(4).
- Implement quirk matching for ATA devices.
- Move xpt_schedule_dev_sendq() from header to source file.
- Move delayed queue shrinking to the more expected place - element freeing.
- Remove some SCSIsms in ATA.
2009-11-11 11:10:36 +00:00
Alexander Motin
8691755dff MFp4:
Improve reporting ATA Status error details.
2009-11-03 11:19:05 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Ed Schouten
912e4916d0 Include <camlib.h> for cam_path_string().
Submitted by:	Pawel Worach
2009-06-14 12:46:34 +00:00
Olivier Houchard
302e130edc Remove duplicate includes.
Submitted by:   Cyril Nguyen Huu <cyril ci0 org>
2007-05-23 13:36:02 +00:00
Matt Jacob
bae3cbf075 Do more guarding against zero divide traps for the geom subroutine. 2006-04-18 21:53:39 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Nate Lawson
141bdcc15a Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

PR:
Submitted by:
Looked over by:	scottl
Approved by:
Obtained from:
MFC after:
2003-06-14 22:17:38 +00:00
David E. O'Brien
9c963d873e Use __FBSDID(). 2003-06-10 17:50:20 +00:00
Poul-Henning Kamp
07c6eac9d7 Add /* FALLTHROUGH */
Move /* FALLTHROUGH */ to correct location.
Remove unused variable(s).

Found by:       FlexeLint
2003-05-31 20:46:21 +00:00
Mike Smith
65c382562e Define the kern.cam sysctl in the cam layer, rather than multiply in several
peripheral drivers.  Remove Ken's comment to the effect that this needed
to be done.

Staticise camnet_ih and cambio_ih.
2002-01-09 03:39:04 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
53b062d3cc cam.c:
Clear up trailing NULs in cam_strvis.

cam_xpt.c:
	Nuke an experimental quirk entry for the Toshiba 3401.  The real
	problem with this device turned out to be a bug in the aic7xxx
	driver that was fixed months ago.

	Add a quirk entry to inhibit multiple lun scanning and serial number
	probing of DPT RAID volumes.  My DPT controller hangs up solid when
	I do either of these things to a RAID 1 volume.
1998-09-22 04:53:23 +00:00
Justin T. Gibbs
8b8a9b1d3e CAM Transport Layer (XPT).
Submitted by:	The CAM Team
1998-09-15 06:33:23 +00:00