set later in the function. This fixes a potential NULL pointer dereference
found on arm64.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
As the support for large blocks was enabled in loader zfs code, the
heap in userboot was left not changed, resulting with failure of detecting
and accessing zfs pools for bhyve virtual machines.
This fix does set the heap to use same amount of memory as the zfsloader
is using. To make it possible to test and verify loader functions, bhyve
is providing very useful option, but it also means, we like to keep feature
parity with [zfs]loader as close as possible.
PR: 212038
Reported by: dfh0522@gmail.com
Reviewed by: allanjude, grehan
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7635
Allow netbooting on efi without having to setup any NFS server by rebuilding the
loader with LOADER_TFTP_SUPPORT like for the i386 pxeloader
Sponsored by: Gandi.net
strings provided by user/config files. This update is replacing sprintf with
snprintf for cases the command_errbuf is built from dynamic content.
PR: 211958
Reported by: ecturt@gmail.com
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7563
Updated sha512 from illumos.
Using skein from freebsd crypto tree.
Since loader itself is using 64MB memory for heap, updated zfsboot to
use same, and this also allows to support zfs large blocks.
Note, adding additional features does increate zfsboot code, therefore
this update does increase zfsboot code to 128k, also I have ported gptldr.S
update to zfsldr.S to support 64k+ code.
With this update, boot1.efi has almost reached the current limit of the size
set for it, so one of the future patches for boot1.efi will need to
increase the limit.
Currently known missing zfs features in boot loader are edonr and gzip support.
Reviewed by: delphij, imp
Approved by: imp (mentor)
Obtained from: sha256.c update and skein_zfs.c stub from illumos.
Differential Revision: https://reviews.freebsd.org/D7418
Some defines needed for exporting serial numbers from the SMBIOS were
missed during integration of SMBIOS support in the EFI boot loader (r281138).
This is needed for getting the hostid set from the system hardware UUID.
PR: 206031
Submitted by: Thomas Eberhardt <sneakywumpus@gmail.com>
MFC after: 1 week
The only difference between 3 and 3B is the size of the RJ45 port.
And now we have a uboot port that expect pcduino3.dts to be present.
Reported by: imp
SMBIOS Type 1 fields:
smbios.system.sku - SKU Number (SMBIOS 2.4 and above)
smbios.system.family - Family (SMBIOS 2.4 and above)
Add kernel environment variables under smbios.planar for the following
SMBIOS Type 2 fields:
smbios.planar.tag - Asset Tag
smbios.planar.location - Location in Chassis
Reviewed by: jhb, grembo
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7453
Machine privilege level was specially designed to use in vendor's
firmware or bootloader. We have implemented operation in machine
mode in FreeBSD as part of understanding RISC-V ISA, but it is time
to remove it.
We now use BBL (Berkeley Boot Loader) -- standard RISC-V firmware,
which provides operation in machine mode for us.
We now use standard SBI calls to machine mode, instead of handmade
'syscalls'.
o Remove HTIF bus.
HTIF bus is now legacy and no longer exists in RISC-V specification.
HTIF code still exists in Spike simulator, but BBL do not provide
raw interface to it.
Memory disk is only choice for now to have multiuser booted in Spike,
until Spike has implemented more devices (e.g. Virtio, etc).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
On Zynq 256K-512K memory region is not accessible by all bus masters.
EHCI driver fails when trying to use it for DMA transfers. Patching
memory node does not help because ubldr overrides values there with
the ones obtained from u-boot. So as a workaround we just mark first
512K as reserved.
PR: 211484
Submitted by: Thomas Skibo <thoma555-bsd@yahoo.com>
MFC after: 3 days
OpenZFS uses feature flags instead of a zpool version number to track
features since the split from Oracle. In addition to avoiding confusion
on ZFS vs OpenZFS version numbers, this also allows features to be added
to different operating systems that use OpenZFS in different order.
The previous zfs boot code (gptzfsboot) and loader (zfsloader) blindly
tries to read the pool, and if failed provided only a vague error message.
With this change, both the boot code and loader check the MOS features
list in the ZFS label and compare it against the list of features that
the loader supports. If any unsupported feature is active, the pool is
not considered as a candidate for booting, and a helpful diagnostic
message is printed to the screen. Features that are merely enabled via
zpool upgrade, but not in use, do not block booting from the pool.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij, mav
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6857
parse() is the boot loader's interp_parse.c is too naive about quotes
both single and double quotes were allowed to be mixed, and single
quotes did not follow the usual semantics (re variable expansion).
The old code did not check for terminating quotes
This update implements:
* distinguishing single and double quote
* variable expansion will not be done inside single quote protected area
* will preserve inner quote for values like "value 'some list'"
* ending quote check.
this diff does not implement ending quote order check, it shouldn't
be too hard, needs some improvements on parser state machine.
PR: 204602
Submitted by: Toomas Soome <tsoome@me.com>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6000
dosfs (fat file systems) can perform reads of partial sectors
bcache should support such reads.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D6475
Summary:
This driver supports the following methods to trigger gathering random bits from the hardware:
1. interrupt when the FIFO is full (default) fed into the harvest queue
2. callout (when BCM2835_RNG_USE_CALLOUT is defined) every second if hz is less than 100, otherwise hz / 100, feeding the random bits into the harvest queue
If the kernel is booted with verbose enabled, the contents of the registers will be dumped after the RBG is started during the attach routine.
Author: hackagadget_gmail.com (Stephen J. Kiernan)
Test Plan: Built RPI2 kernel and booted on board. Tested the different methods to feed the harvest queue (callout, interrupt) and the interrupt driven approach seems best. However, keeping the other method for people to be able to experiment with.
Reviewed By: adrian, delphij, markm
Differential Revision: https://reviews.freebsd.org/D6888
reported by EFI implementation. This address comment on r301714.
Approved by: re (gjb), andrew (mentor)
Differential Revision: https://reviews.freebsd.org/D6787
There is no reason to return non-zero value from zfs_probe_partition()
as that causes following partitions to not be probed for ZFS vdevs.
A particular scenario that I encountered is a GPT partitioned disk
where several partitions have freebsd-zfs type. A partition with a lower
index is used as a cache (l2arc) vdev and in that case case zfs_probe()
returned a non-zero status. That status was returned to ptable_iterate()
and caused it to abort the iteration. Because of that the subsequent
partitions were not probed and a root pool was not discovered resulting
in a boot failure.
While there fix the style for nearby return statements.
Approved by: re (kib)
where we assumed TERM_EMU was defined but didn't check. Fix these by also
including them under the ifdefs.
As HO is called from loader we need a null implementation so loader.efi
doesn't need to know which version of libefi it is building against.
Sponsored by: ABT Systems Ltd
code uses the GetTime function from the Runtime Service, however this has
been shown to not return a useable time on many arm64 UEFI implementations.
Reviewed by: jhb, smh
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6709
TDMA and CESA registers are placed in different ranges of memory. Split
memory resource in DTS to reflect that. This change is needed to support
multiple CESA nodes as otherwise the ranges of different nodes would
overlap.
In consequence, CESA_WRITE and CESA_READ macros have been split depending
on which range of registers is accessed. Offsets for CESA registers have
been modified as the base address has changed.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6217
Commit was temporary fix due to rman_res_t defined as 32-bit u_long.
After redefining it as 64-bit variable workaround is not needed and
was removed.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6214
directly pass the request otherwise use a buffer that is a
multiple of the media size. This speeds up I/O quite a bit
when using large transfer sizes on 4Kn disks etc.
MFC after: 1 week
In r277943, the efinet_match() routine was changed to use an off by one
when matching network interfaces. The effect was that using "net1"
actually used the device attached to "net0".
Digging into the hardware that needed this workaround more, I found that
UEFI was creating two simple network protocol devices for each physical
NIC. The first device was a "raw" Ethernet device and the second device
was a "IP" device that used the IP protocol on top of the underlying
"raw" device. The PXE code in the firmware used the "IP" device to pull
across the loader.efi, so currdev was set to "net1" when booting from the
physical interface "net0". (The loaded image's device handle referenced
the "IP" device that "net1" claimed.)
However, the IP device isn't suitable for doing raw packet I/O (and the
current code to open devices exclusively actually turns the "IP" devices
off on these systems).
To fix, change the efinet driver to only attach to "raw" devices. This
is determined by fetching the DEVICE_PATH for each handle which supports
the simple network protocol and examining the last node in the path. If
the last node in the path is a MAC address, the device is assumed to be
a "raw" device and is added as a 'netX' device. If the last node is not
a MAC address, the device is ignored.
However, this causes a new problem as the device handle associated with
the loaded image no longer matches any of the handles enumerated by
efinet for systems that load the image via the "IP" device. To handle
this case, expand the logic that resolves currdev from the loaded image
in main(). First, the existing logic of looking for a handle that
matches the loaded image's handle is tried. If that fails, the device
path of the handle that loaded the loaded image is fetched via
efi_lookup_image_devpath(). This device path is then walked from the
end up to the beginning using efi_handle_lookup() to fetch the handle
associated with a path. If the handle is found and is a known handle,
then that is used as currdev. The effect for machines that load the
image via the "IP" device is that the first lookup fails (the handle
for the "IP" device isn't claimed by efinet), but walking up the
image's device path finds the handle of the raw MAC device which is used
as currdev.
With these fixes in place, the hack to subtract 1 from the unit can now
be removed, so that setting currdev to 'net0' actually uses 'net0'.
PR: 202097
Tested by: ambrisko
Sponsored by: Cisco Systems
While here, fix the various net driver callbacks to return early instead
of crashing if this fails. (The 'init' callback from the netif interface
doesn't return an error if the protocol lookup fails.)
Sponsored by: Cisco Systems
These efipart layer did several devpath related operations inline. This
just switches it over to using shared code for working with device paths.
Sponsored by: Cisco Systems
Lookup the DEVICE_PATH for each EFI network device handle and output the
string description using printf with '%S'. To honor the pager, the newline
at the end of each line is still output with pager_output().
Sponsored by: Cisco Systems
- efi_lookup_devpath() uses the DEVICE_PATH_PROTOCOL to obtain the
DEVICE_PATH for a given EFI handle.
- efi_lookup_image_devpath() uses the LOADED_IMAGE_DEVICE_PATH_PROTOCOL
to lookup the device path of the device used to load a loaded image.
- efi_devpath_name() uses the DEVICE_PATH_TO_TEXT_PROTOCOL to generate
a string description of a device path. The returned string is a CHAR16
string that can be printed via the recently added '%S' format in
libstand's printf(). Note that the returned string is returned in
allocated storage that should be freed by calling
efi_free_devpath_name().
- efi_devpath_last_node() walks a DEVICE_PATH returning a pointer to the
final node in the path (not counting the terminating node). That is,
it returns a pointer to the last meaninful node in a DEVICE_PATH.
- efi_devpath_trim() generates a new DEVICE_PATH from an existing
DEVICE_PATH. The new DEVICE_PATH does not include the last
non-terminating node in the original path. If the original DEVICE_PATH
only contains the terminating node, this function returns NULL.
The caller is responsible for freeing the returned DEVICE_PATH via
free().
- efi_devpath_handle() attempts to find a handle that corresponds to a
given device path. However, if nodes at the end of the device path do
not have valid handles associated with them, this function will return
a handle that matches a node earlier in the device path. In particular,
this function returns a handle for the node closest to the end of the
device path which has a valid handle.
Sponsored by: Cisco Systems
Pressing the PEK (power enable key) will shutdown the board.
Some events are reported to devd via system "PMU" and subsystem
"Battery", "AC" and "USB" such as connected/disconnected.
Some sensors values (power source voltage/current) are reported via
sysctl (dev.axp209_pmu.X.)
It also expose a gpioc node usable in kernel and userland. Only 3 of
the 4 GPIO are exposed (The GPIO3 is different and mostly unused on
boards). Most popular boards uses GPIO1 as a sense pin for OTG power.
Add a dtsi file that adds gpio-controller capability to the device as
upstream doesn't defined it and include it in our custom DTS.
Reviewed by: jmcneill
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D6135
