opened. After that, the directories are already present, and there is
no point in adding them again. This doesn't fix any bugs; it's just for
efficiency.
testing I changed it to -c to check for missed files by looking at time
stamps in /usr/include/g++.
Submitted by: "Philippe Charnier" <charnier@xp11.frmug.org>
(it was directly underneath where bool.h used to be in the list, I think
I must have not been paying attention and deleted a word from the wrong
line. The machine that I was testing on still had an (old?) osfcn.h file)
Pointed out by: Andreas Klemm <andreas@klemm.gtn.com>
libg++'s exception code causes gcc to generate (ahem!) non-conventional
assembler code in -fpic mode that gas and ld choke on. Basically, gas
and ld require than symbols referenced in the GOT (global offset table)
are actually global (as the name implies). It attempted to work around
it before, but didn't quite go far enough to prevent a core dump in ld.
This hack causes GOT referenced symbols to be forced global. This
probably breaks the __EXCEPTION_TABLE__ stuff in pic mode, but heck, it
wasn't even possible to compile with a shared library before at all.
I'm not 100% sure what the bug is. There's two possibilities:
1: gcc/cp/exception.c has to be fixed to stop doing GOT references to
local symbols, or
2: as/ld/symorder/ld.so etc need to be taught about how to keep local
symbols around so that they can be dealt with in GOT references.
John Polstra's elfkit stuff seems to deal with this fine though, which is
why I think it's a "missing feature" in our hacked gas and ld..
since rt_readenv() already takes care of not setting unsafe variables.
This was part of the changes I submitted to Peter and John during the
review which must have gotten missed.
how I managed to get this out of sync, but I did. I guess that's what I
get for directly committing from different machines that I was testing on.
Pointed out by: Paul Traina <pst@freebsd.org>
a (now) defunct routine that no longer exists (causing an empty .o file),
and were missing some others. Some of the ones we were missing are no-ops
on the i386, so there are now 4 empty .o files.
(It seems that libc/quad has got some defunct functions now)
configurable fallback search paths, as well as new crt interface version.
Also:
- even faster getenv(), get all environment variable settings in a single
pass.
- ldd printf-like format specifications
- minor code cleanups, one vsprintf -> vsnprintf (harmless)
The library search sequence is a little more complete now. Before,
it'd search $LD_LIBRARY_PATH (by opendir/readdir/closedir), then read
the hints file, then read /usr/lib (again by scanning thr directory). It
would then fail if there was no "found" library.
Now, it does LD_LIBRARY_PATH and the hints file the same, but then uses
a longer fallback path. The -R path is fetched from the executable if
specified at build time, the ldconfig path is appended, and /usr/lib is
appended to that. Duplicates are suppressed. This means that simply
placing a new library in /usr/local/lib will work (the same as it did in
/usr/lib) without needing ldconfig -m. It will find it quicker if the
ldconfig is run though.
Similar changes have been made to the NetBSD ld.so, but ours is rather
different now due to John Polstra's speedups and fixes from a while back.
The ldd printf-like format support came direct from NetBSD.
Reviewed by: nate, jdp
ldconfig path (from NetBSD). I added code to make sure there were no
duplicates in the path when multiple ldconfig -m's were used.
Reviewed by: nate, jdp
Obtained from: NetBSD (partly)
with the -R option and store the path in the dynamic header when specified.
The $LD_RUN_PATH environment variable is not checked yet.
While here, split up the code a bit more to enable more selective replacing
of GPL'ed components that are linked with ld.so with others.
Obtained from: NetBSD (mostly, the breakup is my fault)
.weak as gcc and g++ would like to use.
This includes changes to other architectures mostly for completeness,
I don't expect cross-assemblink would work but I could be wrong.
Obtained from: NetBSD
search 'pattern' in whole file 'file', from top to bottom. This is
not necessary; if grep found 'pattern' it can stop further searching
in file 'file'.
Example:
$ time ./grep-old -q Adam /usr/share/dict/*
1.93 real 1.05 user 0.85 sys
$ time ./grep-new -q Adam /usr/share/dict/*
0.14 real 0.06 user 0.06 sys
(the old cc has been tagged with "gcc_2_6_3_final" so we have a reference
point in case of unforseen disasters...)
This has the objc backend active, and I think I've managed to get the
f77 f2c support through in one piece, but I don't know fortran to test it.
A 'make world' change and libobjc commit will follow.
If you normally do 'make -DNOCLEAN world', do not do so this time, I know
it can fail with groff.
This version of gcc makes a **LOT** more warnings on our kernel.
$exit_nomatch: no keyword matched. Default value for variable
exit_nomatch is 0 because `man -k' don't like exit status != 0
Detected by: "Stephen J. Roznowski" <sjr@zombie.ncsc.mil>
as atomically as possible.
(Immutable targets can't be renamed without opening a window when
neither the source nor the target is immutable. Perhaps there
should be a rename_immutable syscall to do this if unsetting the
immutable flags would work.)
Fix things so it *really* won't compile if the environment isn't there.
This commit has been sitting in my to-do list for 2 months. Xditview
should never have been half-removed, so now it's back with a vengance
because we want to keep groff intact as a package.
RCS cannot deal with duplicate tags; the extra one always becomes
inaccessible and useless.
This will prevent the common mistake of specifying the same name
for the vendor tag and the release tag. The FreeBSD CVS repository
already contains zillions of files with this error. We don't need
any more of them.
alias `pcb_cr3' instead. That is still one alias too many, but is convenient
for me since I've replaced the tss in the pcb by a few scalar variables in
the pcb.
need this.
Consider the following code:
case 'O':
output_filename = malloc(strlen(arg)+4);
strcpy(output_filename, arg);
strcat(output_filename, ".tmp");
real_output_filename = arg;
return;
The idea here is to malloc() a buffer big enough to hold the name of
a supplied file name, plus ".tmp". So we malloc() 'size of filename'
bytes plus 4, right? Wrong! ".tmp" is _FIVE_ bytes long! There's a
traling '\0' which strcat() gleefully tacks on _outside_ the bounds
of the buffer. Result: program corrupts own memory. Program SEGVs at
seemingly random times. Bill not like random SEGVs. Bill smash.
Know how I found this? I've been trying to bootstrap -current on my
2.1.0-RELEASE machine at work and I couldn't seem to get libc.a built
because the linker would intermittently blow chunks while executing
things like 'ld -O foo.o -X -r foo.o'. Since this is an initial
bootstrap version of ld, it was linked against the 2.1.0 libc, who's
malloc() behaves differently than that in -current.
Presumeably ld -O doesn't blow up in -current, otherwise someone would
have spotted this already. I don't know if this is a bug or a feature.
Anyway. I'm changing the strlen(arg)+4 to strlen(arg)+5. Bah.
-O filename
Specifies the name of the output file. The file is created as
filename.tmp and when output is complete renamed to filename.
This allows us to:
ld -O ${.TARGET} -x -r ${.TARGET}
file. The field formerly contained random garbage, leading to spurious
differences between otherwise identical executables and libraries.
Submitted by: Bruce Evans <bde@freebsd.org>
been loaded, look for a match by device and inode number if the
traditional pathname comparisons don't find a match. This detects
the case in which a library is requested using two different names
which are really links to the same file, and avoids loading it
twice.
Requested by: peter@freebsd.org
Reviewed by: peter@freebsd.org
matched the filename. Now put the list after the filename. E.g.
filename: vt220keys.1
Keyword: vt220
was: vt220(1), vt220keys(1) - define SHIFTED [...]
now: vt220keys(1), vt220(1) - define SHIFTED [...]
Submitted by: invalid opcode <coredump@nervosa.com>
makewhatis.local - start makewhatis(1) only for file systems
physically mounted on the system
Running makewhatis from /etc/weekly for rw nfs-mounted /usr may kill
your NFS server -- all clients start makewhatis at the same time!
So use this wrapper instead calling makewhatis directly.
Pointed out by: Bruce
"-X" must survive, because of references from relocations, don't
qualify the symbol name with the name of the input file. This
saves some string space. It makes libc_pic.a about 2.4% smaller.
Adapted from a suggestion by Bruce Evans.
descriptions of LD_NO_INTERN_SEARCH and LD_NOSTD_PATH from the manual
page, since they are not supported.
Submitted by: Doug Ambrisko <ambrisko@ambrisko.roble.com>
DITEM_FAILURE - formerly they would simply act as an implicit "continue",
but this is wrong. If you want this behavior, you should now return
with the DITEM_CONTINUE flag set.
Also make the semantics of DITEM_RESTORE quite a bit different - rather
than restore the screen back to pre-menu state, we restore the menu
itself. This is more correct for a variety of reasons when dealing with
nested menus (whoops!).
robust. The new "fire" actions, while affording signficantly more
interactivity to libdialog, come at a cost - if the fire action trashes
the screen then you're not going to be in Kansas anymore when you
come back to the menu and there had better be considerable extra
smarts in place for coping with such a situation. These changes are my
attempt to do just that.
with valid names, the ***/---names were taken first.
this broke eg:
Index: foo/Makefile
==========
RCS <blah>
Retrieving <blah>
diff <blah>
*** Makefile <blah>
--- Makefile <blah>
By trying to patch the Makefile in the _curent_ directory, rather than
the one in the foo/ directory.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
. rename the function to main'gethostname, so it can be called unqualified,
. strip the trailing \0 character, closes PR # bin/1084,
. a better way to express an insane long string.
Submitted by: Giles Lean <giles@topaz.nemeton.com.au> (except the 1st)
This solves the problem of being unable to use shared libraries with dots
in their names before the ".so.<version>" code.
This should be brought into -stable.
There are more changes from Paul that look like they should be included,
but they change the format of the hints file, so I'm not going to bring them
in now (but we should in the future).
Obtained from: pk@netbsd.org
.Fx version.rel { , . ; : ( ) [ ]
Example:
The
.Nm xyzzy
command first appeared in
.Fx 2.2 .
Produces:
The xyzzy command first appeared in FreeBSD 2.2.
Suggested by wollman.
Also corrected a few minor formatting errors, file location and cross
references in some of the section 3 man pages.
This shuts up a lot of the output from "manck" for section 3.
.Os FreeBSD 2.1
will now display "FreeBSD 2.1" at the bottom of the man page,
instead of just "FreeBSD".
Added a bunch of missing standards to the .St macro.
4.4BSD is no longer "BSD Experimental".
Obtained from: Partially obtained from NetBSD & 4.4BSD-lite2
It addresses a number of problems that were present in earlier
versions.
The calls to the "init" and "fini" functions of shared libraries
have been reordered, so that they are called in a strictly nested
fashion, as is required for C++ constructors and destructors. In
addition, the "init" functions are called in better order relative
to each other. That makes the system more tolerant of C++ programs
which depend on a library's being initialized before its clients.
The dynamic linker is now more tolerant of shared libraries in
which dependencies on other shared libraries are incompletely
recorded.
Cleanup in the event of errors has been improved throughout the
dynamic linker. A number of memory leaks were eliminated.
The warning message for a shared library whose minor version number
is too old has been clarified.
The code dealing with the "ld.so.hints" file has been cleaned up.
A bug that caused the hints file to be unmapped incompletely has
been fixed. A different bug that could potentially cause the hints
file to be mapped on top of a loaded object has been fixed.
The code that searches for shared libraries has been cleaned up.
The searching is now more compatible with that done by SunOS and
SVR4. Also, some unnecessary and useless searches of both the
hints file and library directories have been eliminated.
Reviewed by: nate@freebsd.org
and add selection traversal callbacks so context-sensitive behavior can
even be implemented for individual menu items. These work around the two
largest issues holding me back with some of my sysinstall changes.
last time. I should have pulled these in last time as it allows easier
comparison of "where we are at" relative to the current version from
cyclic.com. Since this is in a 4.4BSD style tree layout, the changelogs
dont exactly match the file layout, but it's close enough.
-mprofiler-epilogue to support it and documented the option.
cc.1:
Listed all the machine-dependent options, even the temporary
debugging ones.
invoke.texi:
Fixed the sense of -mno-ieee-fp.
Sorted the machine-dependent options.
Two uninitialised variables were causing a phkmalloc warning (another notch
in phkmalloc's belt) and caused the full rcstemplate to not be constructed
for commits on freefall.
(Note that you need to have either done a 'make world' or explicitly
run a 'make distrib-dirs' (in src/etc) to get some needed directories in
/usr/share/examples/cvs to be built.)
The code, as written, appears to load the new database data into a new
hash file and renames the two.
Due to a run of bugs and lack of error checking, it's going a whole
mess of unlink() and rename() calls that are failing. It only
worked in the first place because the data was being inserted into a
"live" hash file. (I wonder how much stale data has assumulated?)
Submitted by: Laurence Lopez <lopez@mv.mv.com>
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
Changed beforeinstall rule to use `install -C' instead of `cmp -s'
and `install -c'. `install -C' has exactly the right semantics
for installing headers and should be used elsewhere.
vector. Now it is called the "symbol caching" vector. This was made
possible and unconfusing by other changes that allowed me to localize
everything having to do with the caching vector in the function
reloc_map().
Switched to alloca() for allocating the caching vector, and eliminated
the special mmap-based allocation routines. Although this was motivated
by performance reasons, it led to significant simplification of the
code, and made it possible to confine the symbol caching code to the
single function reloc_map().
Got rid of the unnecessary and inefficient division loop at the
beginning of rtld().
Reduced the number of calls to getenv("LD_LIBRARY_PATH") to just 1, on
suggestion from <davidg@root.com>.
Added breaks out of the relocation loops when the relocation address is
found to be 0. A relocation address of 0 is caused by an unused
relocation entry. Unused relocation entries are caused by linking a
shared object with the "-Bsymbolic" switch. The runtime linker itself
is linked that way, and the last 40% of its relocation entries are
unused. Thus, breaking out of the loop on the first such entry is a
performance win when ld.so relocates itself. As a side benefit, it
permits removing a test from md_relocate_simple() in
../i386/md-static-funcs.c.
Unused relocation entries in other shared objects (linked with
"-Bsymbolic") caused even bigger problems in previous versions of the
runtime linker. The runtime linker interpreted the unused entries as if
they were valid. That caused it to perform repeated relocations of the
first byte of the shared object. In order to do that, it had to remap
the text segment writable. Breaking out of the loop on the first unused
relocation entry solves that.
Submitted by: John Polstra <jdp@polstra.com>
them. Good greif! This was causing an unimaginable amount of brain-damage!
The mere fact that I griped about $ Log $ in a previous commit (misspelled
deliberately here) meant that the blasted thing was being expanded from the
middle of the log entry as well as the beginning, and using " * All these"
as the comment leader.. AARGH!!!! We *really* need to prevent these from
being expanded! (or remove the magic identifier from the source).
All those $Log$ entries, combined with the whitespace changes are a real
pain.
I'm committing this now, before it's completely finished to get it compiling
and working again ASAP. Some of the FreeBSD specific features are not working
in this commit yet (mainly rlog stuff and $FreeBSD$ support)
This is going to be pretty messy.... Although the vendor import was correct,
both the vendor and release tags are the same "gnu"... :-/
Getting cvs to choose the correct one might be rather interesting...
Note, this is going to be messy.. 2.3 was vendor-branch imported, while
2.6 was done as a delta. Sigh. I'm importing this on a vendor branch so
that it will be easier to deal with next time..
(cvs-1.6 wants rcs-5.7, and rcs-5.7 suggests diffutils-2.7)
Implemented symbol memorizing to reduce the number of calls to lookup(),
making relocation go faster. While relocating a given shared object,
the dynamic linker maintains a memorizing vector that is directly
indexed by the symbol number in the relocation entry. The first time a
given symbol is looked up, the memorizing vector is filled in with a
pointer to the symbol table entry, and a pointer to the so_map of the
shared object in which the symbol was defined. On subsequent uses of
the same symbol, that information is retrieved directly from the
memorizing vector, without calling lookup() again.
A symbol that is referenced in a relocation entry is typically
referenced in many relocation entries, so this memorizing reduces the
number of calls to lookup() dramatically. The overall improvement in
the speed of dynamic linking is also dramatic -- as much as a factor of
three for programs that use many shared libaries.
Submitted by: jdp@polstra.com "John Polstra"
bsd.man.mk when I change the latter to use `::' instead of `:'
dependencies. (bsd.man.mk is included because NOMAN isn't defined.
The maninstall target is supposed to be private to bsd.man.mk so
bsd.man.mk doesn't bother testing if it is already defined. The
test for redefinition in Makefile.dev was too early to do anything.)
Change install target to a beforeinstall target (perhaps there should
be an `extrainstall' target so that Makefiles don't have to abuse
one of beforeinstall, install, realinstall or afterinstall). Don't
bother testing for the install target already being defined. Rewrite
the shell loop as a make loop (this reduces the time for installing
groff from 78s to 65s here).
include this in the old makefiles.
I intended to fix only the private maninstall rule but found a lot of
other bogons and bugs:
- strong resistance to installing the program anywhere other than
${DESTDIR}/usr/bin (first, ../../Makefile.inc was not included.
../Makefile/inc was redundantly included instead. Second, /usr/bin
was hard coded).
- the owner, group and permissions were hard coded.
- the man page was installed twice.
- MANDEPEND wasn't necessary.
- calculations to determine the obj directory weren't necessary.
- there were unnecessary private rules for depend, rcsfreeze and tags.
We don't support the rcsfreeze target.
- there was an extra, bogus, rule for `all'.
The final version uses suffix rules to eliminate the remaining verboseness
involving directories (${.CURDIR}) and to potentially allow multiple
shell programs in one directory.
We already check for (and reject entries with) '+' or '-' as the first
character of the key side of the key/data pair; we should check the data
side too. (Letting spurious +/- entries into the NIS maps is bad karma.)
I got tired of see ``UNIX System Managers Manual''
NOTE: There still a couple of UNIXs left in here. There deal with the
documents. We may want to change there also, even though VERY little of there
even pertain to FreeBSD.
instead of the uninitialized one $(DEVICE).
I hoped these changes would fix some of the large runtime macro processing
bugs, but they seem to only fix some small build-time macro substitution
bugs. E.g., `man ms' now tells you to invoke groff with the flags `-ms'
instead of the bogus flags `-m'; `man groff now tells you that the default
device is `ps' instead of the bogus device `'.
shared library. Formerly, the message looked like this:
ld.so: run: libjdp1.so.1.0: Undefined error: 0
The new message looks like this:
ld.so: run: Can't find shared library "libjdp1.so.1.0"
(Where "run" is the name of the program being executed.)
Submitted by: jdp@polstra.com (John Polstra)
symbols.
An easy example to see this is to develop an X program which links
against Xt, but doesn't add -lX11 to the link line. It will link fine,
but cause run-time errors by ld.so because of missing symbols used by Xt
defined in X11. This patch makes the errors more readable.
Submitted by: jdp@polstra.com (John Polstra)
#ifdef out a number of calls to free() left over from the original
GNU ypserv implementation. As near as I can tell, the Berkeley DB
package does its own garbage collection, hence the caller doesn't
have to worry about free()ing the memory returned in the DBT
structures during lookups (I'm still not 1005 sure about this:
the DB code is very hard to follow. I must use dynamically
allocated memory since you can retreive arbitrarily large records
from a database, but I'm not sure where it ends up letting go
of it). This was not true with GDBM; you had
to do your own garbage collection.
The general rule is that if you allocate memory inside an RPC
service routine, you have to free() it the next time the routine is
called since the underlying XDR routines won't do it for you.
But if the DB package does this itself, then we don't need to do
it in the main program.
Note that with the original malloc(), there were never any errors
flagged. phkmalloc complained quite loudly.
in the diff. This makes it so that diffs containing files in different
subdirectories that have the same name not patch the same file. For example
a diff with patches to Makefile, des/Makefile, usr.bin/Makefile would attempt
to patch Makefile three times.
