We should only unmask interrupts when creating a new thread and leave the
other exceptions in teh same state as before creating the thread.
Reported by: jhibbits
Reviewed by: jhibbits
MFC after: 1 month
Sponsored by: https://reviews.freebsd.org/D17497
The change is based on public documents listed below as well as Linux
changes and the code developed by Kostik.
The documents:
- Intel® C620 Series Chipset Platform Controller Hub Datasheet
- Intel® 100 Series and Intel® C230 Series Chipset Family Platform
Controller Hub (PCH) Datasheet - Volume 2 of 2
Interesting Linux commits:
- 9424693035
- 2a7a0e9bf7
The peculiarity of the new chipsets is that the watchdog resources are
configured in PCI registers of SMBus controller and Power Management
function as opposed to the LPC bridge. I took a simplistic approach of
querying the resources from the respective PCI devices. ichwd is still
a device on isa bus. The PCI devices are found by their slot and
function defined in the datasheets as siblings of the upstream LPC
bridge.
There are some shortcuts and missing features.
First of all, I have not implemented the functionality required to clear
the no-reboot bit. That would require writing to a special PCI
configuration register of a hidden / invisible PCI device after which
the device would start responding to accesses to other registers. The
no-reboot bit was not set on my test hardware, so I decided to leave its
handling for the later time.
Also, I did not try to handle the case where the watchdog resources are
not configured by the hardware as well as the case where ACPI defined
operational region conflicts with the watchdog resources. My test
system did not have either of those problem, so, again, I decided to
leave those cases until later.
See this Linux commit for some details of the ACPI problem:
a7ae81952c
Finally, I have added only the PCI ID found on my test system. I think
that more IDs can be added as the change gets tested.
Tested on Dell PowerEdge R740.
PR: 222079
Reviewed by: mav, kib
MFC after: 3 weeks
Relnotes: maybe
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D17585
Further investigation of issues with 32-bit DMA on PowerNV revealed that
its window is hardcoded by OPAL (at least in skiboot version 5.4.9) and
cannot be changed by the OS.
Thus, now jhb suggestion of limiting the range in PCI DMA tag seems
the best way to deal with it.
Reviewed by: jhibbits, nwhitehorn, sbruno
Approved by: jhibbits(mentor)
Differential Revision: https://reviews.freebsd.org/D17601
SX-locks, during if_purgeaddrs(), by not allowing to hold the epoch
read lock over typical network IOCTL code paths. This is a regression
issue after r334305.
Reviewed by: ae (network)
Differential revision: https://reviews.freebsd.org/D17647
MFC after: 1 week
Sponsored by: Mellanox Technologies
the current fixed values, which enables use of rates above 1 Mbps.
Improved the detection of HXD chips, and the status flag handling as
well.
Submitted by: Gabor Simon <gabor.simon75@gmail.com>
PR: 225932
Differential revision: https://reviews.freebsd.org/D16639
MFC after: 1 week
Sponsored by: Mellanox Technologies
If power exceed the slot limit, or slot limit is unknown the ConnectX-6
firmware will shutdown its port.
Inform the user via debug message.
MFC after: 3 days
Approved by: hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
Instead of finding the exact size to fit in we can just shift the target
by -8 + tail. Doing a blind write to a previously rep stosq'ed area comes
with a penalty so do it conditionally.
Sample win on EPYC when zeroing a 257 sized buffer (tail = 1) aligned to
16 bytes:
before: 44782846 ops/s
after: 46118614 ops/s
Idea stolen from NetBSD.
Sponsored by: The FreeBSD Foundation
The Device Specific Method (_DSM) is on optional object that defines
device specific controls. This will be useful for our power management
controller in upcoming patches. More information can be found in ACPI
spec 6.2 section 9.1.1
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
This patch had a minor modification changing ENOMEM to AE_NO_MEMORY
after it got review and approval but before committing.
Test Plan: Tested in my s0ix branch
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D17121
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
scsi_low was a common set of routines to do the SCSI bus sequencing
for the ncv, nsp and stg drivers. Those have been removed, so it's no
longer needed since nothing else in the tree uses it and nothing
likely ever will (it's for super-low-end 8-bit parallel SCSI cards).
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
We're planning on removing adv, adw, aha, aic, bt, ncv, nsp, and stg
soon. They have been tagged for removal in 12. At least get them out
of GENERIC.
MFC after: 3 days
Relnotes: yes
si_addr is the address of the instruction executing at the time the
signal was sent. Populate this field with srr0, which, though not
always the case, is most often the instruction that triggered the fault.
debugf() is unnecessary for the TLB printing functions, as they're only
intended to be used from ddb. Instead, make them full DDB 'show'
commands, so now it can be written as 'show tlb1' and 'show tlb0'
instead of calling the function, hoping DEBUG has been defined.
Currently, icmp_error() function copies FIB number from original packet
into generated ICMP response but not mbuf_tags(9) chain.
This prevents us from easily matching ICMP responses corresponding
to tagged original packets by means of packet filter such as ipfw(8).
For example, ICMP "time-exceeded in-transit" packets usually generated
in response to traceroute probes lose tags attached to original packets.
This change adds new sysctl net.inet.icmp.error_keeptags
that defaults to 0 to avoid extra overhead when this feature not needed.
Set net.inet.icmp.error_keeptags=1 to make icmp_error() copy mbuf_tags
from original packet to generated ICMP response.
PR: 215874
MFC after: 1 month
If pf logs the user id ('pass out log (user)') have tcpdump also print
this.
Example output:
00:00:00.000000 rule 0/0(match) [uid 1001]: pass out on vtnet0: (tos 0x0, ttl 64, id 57539, offset 0, flags [none], proto UDP (17), length 55)
172.16.2.2.18337 > 172.16.2.1.53: [bad udp cksum 0x5c58 -> 0x16e4!] 40222+ A? google.be. (27)
PR: 122773
Differential Revision: https://reviews.freebsd.org/D17625
* use CK_LIST and FNV hash to keep chains of softc;
* read access to softc is protected by epoch();
* write access is protected by ipsec_ioctl_sx. Changing of softc fields
is allowed only when softc is unlinked from CK_LIST chains.
* linking/unlinking of softc is allowed only when ipsec_ioctl_sx is
exclusive locked.
* the plain LIST of all softc is replaced by hash table that uses ingress
address of tunnels as a key.
* added support for appearing/disappearing of ingress address handling.
Now it is allowed configure non-local ingress IP address, and thus the
problem with if_ipsec(4) configuration that happens on boot, when
ingress address is not yet configured, is solved.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17190
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17214
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
* remove the note about ingress address from BUGS section.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
appearing and disappearing on the host system.
Such handling is need, because tunneling interfaces must use addresses,
that are configured on the host as ingress addresses for tunnels.
Otherwise the system can send spoofed packets with source address, that
belongs to foreign host.
The KPI uses ifaddr_event_ext event to implement addresses tracking.
Tunneling interfaces register event handlers and then they are
notified by the kernel, when an address disappears or appears.
ifaddr_event_compat() handler from if.c replaced by srcaddr_change_event()
in the ip_encap.c
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
The current documentation describing the syntax of a VALE port is wrong.
This patch fixes it to make it consistent.
Approved by: bcr, gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17411
vlan_lladdr_fn() is called from taskqueue, which means there's no vnet context
set. We can end up trying to send ARP messages (through the iflladdr_event
event), which requires a vnet context.
PR: 227654
MFC after: 3 days
This allows use differen values configured by user for sysctl variable
net.inet.ip.fw.dyn_rst_lifetime.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
