Commit Graph

291 Commits

Author SHA1 Message Date
Warner Losh
406259c133 Two fixes for devd:
1) Move devd to the start of the head of the boot process rather than the end.
2) Disable devctl if devd is disabled.
2002-11-30 00:40:53 +00:00
Robert Watson
881a0ee9b5 Update rc scripts to load mac_lomac instead of lomac.
Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-26 17:51:03 +00:00
Warner Losh
7b13078b41 Add devd to the mix. It should run basically last at this point.
# I've tested this, but only lightly, so please email me with problems.
2002-11-09 07:45:53 +00:00
Bill Fenner
04b3b6443c Force rpcbind to start even if it wasn't enabled. This solves the ypbind
problems people were having at startup.

Approved by:    re
2002-11-04 20:51:20 +00:00
Hajimu UMEMOTO
7b988fe73c Add IPv6 setup for ipfilter. `ipv6_ipfilter_rules' was added
to specify rules definition file for ipfilter.  The default is
/etc/ipf6.rules.  If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.

Reviewed by:	Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after:	1 week
2002-11-02 08:21:26 +00:00
Gordon Tetlow
cbde04a9b7 Wrap test case in an if statement to avoid crunching a return value. 2002-10-31 02:06:05 +00:00
Bill Fenner
be9faa3290 Fix "err" usage.
PR:		44284
Submitted by:	Sergey Mokryshev <mokr@mokr.net>
2002-10-26 00:18:06 +00:00
Bill Fenner
dab1b45261 Fix two typos. Using "-eq" instead of "=" in a [ caused an error when
an entry in /etc/sysctl.conf didn't exist.  Fixing this exposed a minor
typo "exits" vs. "exist".

However, there doesn't appear to be any provision to run this with
the "lastload" argument, meaning that the error will never appear.
2002-10-25 23:02:54 +00:00
Maxim Sobolev
119b9f09e9 Fix silly typo: loacal --> local. 2002-10-17 23:46:32 +00:00
Jens Schweikhardt
0de35d0351 s/dependancy/dependency/ 2002-10-12 13:49:21 +00:00
Jens Schweikhardt
143085107b Fix style bugs:
* Space -> tabs conversion.
* Removed blanks before semicolon in "if ... ; then".
* Proper indentation of misindented lines.
* Put a full stop after some comments.
* Removed whitespace at end of line.

Approved by:	silence from gordon
2002-10-12 10:31:31 +00:00
Dima Dorfman
2dbe6947fa Aesthetics: Output a prefix before sourcing rc.local as the old rc
script did.  Stuff in rc.local frequently has lines like
"echo -n ' service_name'" which look ugly without a prefix and a
trailing period.  Likewise for rc.shutdown.local for consistency.
2002-10-12 07:23:43 +00:00
Dima Dorfman
2ca85e3d5e In a diskless setup, rc.d/initdiskless may overwrite parts of /etc on
a per-machine or per-cluster (with different ways of expressing what's
part of a cluster) basis.  In order for this to be effective, rc.conf
has to be reread after initdiskless is finished.  Implement this by
adding a hook to etc/rc which rereads rc.conf by request.  This can
also be implemented by renaming initdiskless to initdiskless.sh and
sourcing rc.conf there manually, but it was decided that, that would
be uglier than a hook in etc/rc.

Developed in concert with:	gordon
2002-10-02 00:59:14 +00:00
Ruslan Ermilov
7206028152 test -h is deprecated; use -L instead.
PR:             bin/40846
2002-10-01 13:29:45 +00:00
Matthew N. Dodd
e2540a6d46 - Recognize 'idt' interfaces.
- The start command is 'atm_start' not 'start_cmd'.
2002-09-30 08:01:43 +00:00
Gordon Tetlow
38441fbf04 Fix moused so you can use the stop command
Reported by:	wa1ter@myrealbox.com
2002-09-27 16:54:21 +00:00
Poul-Henning Kamp
320d99c058 Use mdmfs(8) rather than rolling our own RAM-disks.
Sponsored by:	DARPA & NAI Labs.
2002-09-22 09:48:02 +00:00
Hajimu UMEMOTO
a75d520e1f up gif during setup. 2002-09-20 18:31:55 +00:00
Ralf S. Engelschall
25ade111dc Fix implementation of rc variables $amd_flags and $amd_map_program in
rcNG. The $amd_flags variable was already taken over into $rc_flags
by run_rc_command() when amd_precmd() is executed, so changing
$amd_flags there no longer effects the actual execution of amd.
Hence in amd_precmd() the $rc_flags have to be adjusted instead.
2002-09-18 08:49:50 +00:00
Peter Wemm
66422f5b7a Initiate deorbit burn for the i386-only a.out related support. Moves are
under way to move the remnants of the a.out toolchain to ports.  As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL.  It has already lasted WAY beyond
that.

Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.

Tested on: i386 (extensively), alpha
2002-09-17 01:49:00 +00:00
Gordon Tetlow
42f10b3fe0 Fix sendmail to use checkyesno since rc.conf is no longer re'sourced from the
debug statement.
2002-09-12 17:31:09 +00:00
John Baldwin
2cb1c3a5c5 Cosmetic cleanup to a message. 2002-09-11 19:49:43 +00:00
Gordon Tetlow
e022d3b1aa Fix syscons so it actually does start.
Reported by:	keramida, ume
Submitted by:	keramida
2002-09-09 22:40:34 +00:00
Gordon Tetlow
77e55efba0 Convert from ${CMD_OSTYPE} to ${OSTYPE}. This saves a shell invocation on
OS-dependent case switches.
2002-09-06 16:18:05 +00:00
Peter Wemm
f915be3bad rev 1.6 claimed to add 'bootparams', but in fact added 'bootparamd' which
does not exist.
2002-09-06 01:23:31 +00:00
Bill Fenner
4716fa4ee9 Only try to initialize syscons if /dev/ttyv0 exists and it's not a pcvt. 2002-09-05 23:51:28 +00:00
Bill Fenner
57dedf04ca Only try to run /usr/sbin/ispcvt if it exists and is executable. 2002-09-05 23:50:34 +00:00
Gordon Tetlow
adac8f8551 Add an archdep script and hook it up to the build.
Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-09-05 20:29:18 +00:00
Gordon Tetlow
7ea5622b15 Hook bootparams up to the world 2002-09-05 20:15:08 +00:00
Gordon Tetlow
b0e6d55b9e Introduce bootparamd into the boot scripts. Add a bootparamd_enable and
_flags to rc.conf

Submitted by:	John Hay <jhay@zibbi.icomtek.csir.co.za>
2002-09-05 20:14:46 +00:00
Gordon Tetlow
f048183067 nfsd doesn't die on SIGTERM but on SIGUSR1, correct script to kill nfsd with
the right signal.
2002-09-03 16:02:57 +00:00
Gordon Tetlow
b168ce8b63 We don't use single_mountd_enable anymore. It's just mountd_enable. I must
have missed this in my earlier sweep.
2002-09-02 21:20:58 +00:00
Gordon Tetlow
da5e455e1a Only install the scripts that actually used on FreeBSD. 2002-09-02 20:49:26 +00:00
Gordon Tetlow
4376ad7708 Commit a revised sendmail script that works the same way as rc.sendmail.
This should also quell warnings when sendmail_enable="NONE"
2002-09-02 20:37:03 +00:00
Hellmuth Michaelis
6b6c162a88 integrate pcvt configuration into the new /etc/rc.d startup system
PR:           i386/7100
Reviewed by:  Gordon Tetlow <gordon@FreeBSD.org>
2002-08-30 12:43:23 +00:00
Gordon Tetlow
4642178fcc Print out a carriage return to make the screen output make more sense
Submitted by:	mike@
2002-08-20 00:14:11 +00:00
Gordon Tetlow
88f7d3e22b Clean up the scripts to use the new variables:
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*

Also change single_mountd_enable -> mountd_enable
Changing the mountd flags brings us closer to NetBSD.

All of the old variable names are shimmed so you can continue to use the
old variable name.

Finally make /etc/rc.d/mountd no longer dependent on nfs as there are
(apparently) other consumers of mountd.

Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-08-14 05:44:32 +00:00
Jens Schweikhardt
84bd1082cb Fix typos (s/seperat/separat/ et al); add FreeBSD ID.
Suggested by:	bde
MFC after:	3 days
2002-08-12 10:04:32 +00:00
Gordon Tetlow
897102c745 Make the othermta script DTRT when an mta startup script is not specified.
Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-08-09 17:45:04 +00:00
Gordon Tetlow
e4bc448975 Correct comment
Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-08-09 17:33:07 +00:00
Hajimu UMEMOTO
ec2409ba60 FreeBSD has setkey in different location from NetBSD.
Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-07-31 16:39:19 +00:00
Dima Dorfman
527597b2d9 Stock -current has more than 300 files in /etc, so 255 inodes for the
/etc filesystem isn't enough; consequently, add "-i 4096" to the newfs
command for /etc.  This results in 1022 inodes, which should be enough
for the forseeable future (although I don't know why we would ever
have more than 1000 files in a default /etc).

Silence by:	-current
2002-07-28 03:41:53 +00:00
Dima Dorfman
cfab43190a Add a period to the end of the "starting" message to be consistent
with the rest of the output during a boot.
2002-07-28 03:38:10 +00:00
Hajimu UMEMOTO
9067589d53 be able to configure to run an IPv6 routing daemon even on
an end node (sync with rc.network6 1.30).

Approved by:	gordon
2002-07-21 19:12:21 +00:00
Dima Dorfman
dacf6a1e22 Remove spurious "echo '.'". 2002-07-18 05:00:23 +00:00
Brian S. Dean
9f0af70eb1 Apply same fix as Rev 1.19 of /etc/rc.diskless2: create sendmail
required directories if sendmail_enable is not set to "none".

Suggested by:   gordon
2002-07-18 05:00:22 +00:00
Doug Barton
d45ed36711 Anonymize the "portmap" program to get better compatibility with
rpcbind in -current.

Submitted by:   Alexander Kabaev <ak03@gte.com>
2002-07-18 05:00:21 +00:00
Doug Barton
de66529e70 Make nisdomainname=NO DTRT
Submitted by:   des, via Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:20 +00:00
Doug Barton
4264c30c0d Cleanup some pollution from the NetBSD sync, and add gif setup.
Submitted by:   Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:19 +00:00
Gordon Tetlow
8abdee58c7 Fix a typo that caused dhclient not to work.
Submitted by:   Dennis Kristensen <snicki@snicki.dk>
Reviewed by:    Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:18 +00:00