Create a sequence point by ending a full expression for call to
vspace() and use of the globals which are modified by vspace().
Reported and reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22126
When we raise a data abort from the kernel we need to enable interrupts,
however we shouldn't be doing this when in the kernel debugger. In this
case interrupts can lead to a further panic as they don't expect to be
run from such a context.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This method check that boot_on or always_on is set to 1 and if it
is it will try to enable the regulator.
The binding docs aren't clear on what to do but Linux enable the regulator
if any of those properties is set so we want to do the same.
The function first check the status to see if the regulator is
already enabled it then get the voltage to check if it is in a acceptable
range and then enables it.
This will be either called from the regnode_init method (if it's needed by the platform)
or by a SYSINIT at SI_SUB_LAST
Reviewed by: mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22106
operation & ~limit where limit is a bool is clearly not what was intended,
given the line prior. Correct it to use the calculated mask for validation.
The cap_sysctl tests should now be functional again.
Shuffle headers around to more appropriate #ifdef OPTION blocks (INET vs.
INET6) -- double checked LINT-{NOINET,NOINET6,NOIP}, all seem good.
Reported by: cem
r353489 added minidump support for powerpc64, but it added a dependency on
the dump_avail array. Leaving it uninitialized caused breakage in late
boot. Initialize dump_avail, even though the 64-bit booke pmap doesn't yet
support minidumps, but will in the future.
Instead of superpages use. The current code employs superpage-wide locking
regardless and the better locking granularity is welcome with NUMA enabled
even when superpage support is not used.
Requested by: alc
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21982
Vast majority of uses the cache are just checking if there is an entry
present on process exit (and evicting it if so). Both checking and
eviction process are very expensive and put the lock protecting it high
up on the profile during poudriere -j 104.
Convert the linked list into a hash. This allows to almost always avoid
taking the lock in the first place (and consequently almost removes it
from the profile). Note only one lock is preserved as a split did not
meaningfully impact contention.
Should the cache be used for something it will still run into contention
issues. The code needs a rewrite, but should someone want to tidy it up
further the following can be done:
1) per-chain locks (or at least an array)
2) hashing by something else than just pid
Sponsored by: The FreeBSD Foundation
This appears to be a copy-pasto from previous lines that propagated to v6
over the years. Indeed, nothing references kernelstack beyond
USPACE_SVC_STACK_TOP and it would be odd if anything did.
Noticed by: markj
NIC KTLS will add a new TLS send tag type in cxgbe(4) that is a
distinct tag from a ratelimit tag. To support this, refactor
cxgbe_snd_tag to be a simple send tag with a type and convert the
existing ratelimit tag to a new cxgbe_rate_tag structure.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22072
Previously the table was allocated on first use by TOE and the
ratelimit code. The forthcoming NIC KTLS code also uses this table.
Allocate it unconditionally during attach to simplify consumers.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D22028
On POWER8 systems with only one memory domain, the "ibm,associativity"
number that corresponds to it is 0, unlike POWER9 systems with two
or more domains, in which the minimum value is 1.
In POWER8 case, subtracting 1 causes an underflow on the unsigned domain
variable and a subsequent index out-of-bounds access.
Reviewed by: jhibbits
Tested by: bdragon, luporl
- td_kstack_pages was not being initialized.
- td_kstack is supposed to be the base address of the stack region,
not the top.
The arm ports seem to have similar problems and will be fixed next.
Reported by: Jenkins via lwhsu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
except for filesystems that set the MNTK_VMSETSIZE_BUG, Set the flag for ZFS.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
Make the nfsclient always call vnode_pager_setsize() with the vnode
exclusively locked. This ensures that page fault always can find the
backing page if the object size check succeeded. Set VV_VMSIZEVNLOCK
flag on NFS nodes.
The main offender breaking the interface in nfsclient is
nfs_loadattrcache(), which is used whenever server responded with
updated attributes, which can happen on non-changing operations as
well. Also, iod threads only have buffers locked (and even that is
LK_KERNPROC), but they still may call nfs_loadattrcache() on RPC
response.
Instead of immediately calling vnode_pager_setsize() if server
response indicated changed file size, but the vnode is not exclusively
locked, set a new node flag NVNSETSZSKIP. When the vnode exclusively
locked, or when we can temporary upgrade the lock to exclusive, call
vnode_pager_setsize(), by providing the nfsclient VOP_LOCK() implementation.
Tested by: pho
Discussed with: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
The flag specifies that vm_fault() handler should check the vnode'
vm_object size under the vnode lock. It is converted into the object'
OBJ_SIZEVNLOCK flag in vnode_pager_alloc().
Tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
This change consists of two parts.
First, nctgpio now supports hardware access via an I/O port window if
it's configured by firmware. For instance, PC Engines firmware
v4.10.0.2 does that. This is faster than going through the Super I/O
configuration registers.
Second, nctgpio now caches values of bits that it controls. For
example, the driver does not need to access the hardware to determine if
a pin is an output or an input, or a state of an output. Also, the
driver makes use of the fact that the hardware preserves an output state
of a pin accross a switch to the input mode and back.
With this change I am able to use the 1-Wire bus over nctgpio whereas
previously the driver introduced too much latency to be compliant with
the relatively strict protocol timings.
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
gpio1: <Nuvoton GPIO controller> at GPIO ldn 0x07 on superio0
pcib0: allocated type 4 (0x220-0x226) for rid 0 of gpio1
gpiobus1: <GPIO bus> on gpio1
owc0: <GPIO attached one-wire bus> at pin 4 on gpiobus1
ow0: <1 Wire Bus> on owc0
ow0: romid 28:b2:9e:45:92:10:02:34: no driver
ow_temp0: <Advanced One Wire Temperature> romid 28:b2:9e:45:92:10:02:34 on ow0
MFC after: 4 weeks
The correctness of per-CPU cache accounting in that function is
dependent on reading per-CPU pointers exactly once. Ensure that
the compiler does not emit multiple loads of those pointers.
Reported and tested by: pho
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22081
Simply adding MODULE_VERSION does not do the trick, because the modules
haven't been declared. This should actually fix modfind/kldstat, which
r351229 aimed and failed to do.
This should make vm-bhyve do the right thing again when using the ports
version, rather than the latest version not in ports.
MFC after: 3 days
These drivers have been merged into a single if_tuntap in 13.0. The
compatibility links existed only for the interim and will be MFC'd along
with the if_tuntap merge shortly.
MFC after: never
Previously color.disabled would be calculated at color module load time,
then never touched again. We can detect serial boots beyond just what we're
told by loader.conf(5) so this works out in many cases, but we must
re-evaluate the situation after the config is loaded to make sure we're not
supposed to be forcing it enabled/disabled.
Discovered while trying to test r353872.
When colors are disabled, color.escape{fg,bg} would return the passed in
color rather than the proper ANSI sequence for the color.
color.escape{fg,bg} would be wrong.
Instead return '', as the associated reset* functions will also return ''.
This should get rid of the funky '2' and '4' in the kernel selector if
you're booting serial.
Reported by: npn
opensolaris_atomic.S is now only used on i386 with opensolaris_atomic.c
used on other platforms. After r353381 it doesn't exist on those
platforms so the stale dependency would result in a build error.
r353408 addressed this issue for cddl/lib/libzpool, but it persisted
with the opensolaris and zfs modules.
