It seems we only use `lbolt' inside the VFS syncer and the TTY layer
now. Because I'm planning to replace the TTY layer next month, there's
no reason to keep `lbolt' if it's only used in a single thread inside
the kernel.
Because the syncer code wanted to wake up the syncer thread before the
timeout, it called sleepq_remove(). Because we now just use a condvar(9)
with a timeout value of `hz', we can wake it up using cv_broadcast()
without waking up any unrelated threads.
Reviewed by: phk
- Check if panicstr isn't set, if it is ignore the lock. This helps to avoid
confusion, because lockmgr is a no-op when panicstr isn't NULL, so
asserting anything at this point doesn't make sense and can just race with
other panic.
Discussed with: kib
and there is no need to maintain it.
- Fix vn_get() in order to let it call vget(9) with a valid locking
request. vget(9) returns the vnode locked in order to prevent recycling,
but in this case internal XFS locks alredy prevent it from happening, so
it is safe to drop the vnode lock before to return by vn_get().
- Add a VNASSERT() in vget(9) in order to catch malformed locking requests.
Discussed with: kan, kib
Tested by: Lothar Braun <lothar at lobraun dot de>
mount fs needing Giant to be held when processing bufobjs.
Use a different subqueue for pending workitems on filesystems requiring
Giant. This simplifies the code notably and also reduces the number of
Giant acquisitions (and the whole processing cost).
Suggested by: jeff
Reviewed by: kib
Tested by: pho
info about all currently mounted file systems. When an address is given
as an argument, prints detailed info about the given mount point.
MFC after: 2 weeks
filesystem-specific vnode data to the struct vnode. Provide the
default implementation for the vop_advlock and vop_advlockasync.
Purge the locks on the vnode reclaim by using the lf_purgelocks().
The default implementation is augmented for the nfs and smbfs.
In the nfs_advlock, push the Giant inside the nfs_dolock.
Before the change, the vop_advlock and vop_advlockasync have taken the
unlocked vnode and dereferenced the fs-private inode data, racing with
with the vnode reclamation due to forced unmount. Now, the vop_getattr
under the shared vnode lock is used to obtain the inode size, and
later, in the lf_advlockasync, after locking the vnode interlock, the
VI_DOOMED flag is checked to prevent an operation on the doomed vnode.
The implementation of the lf_purgelocks() is submitted by dfr.
Reported by: kris
Tested by: kris, pho
Discussed with: jeff, dfr
MFC after: 2 weeks
dropped after the call to lockmgr() so just revert this approach using
something similar to the precedent one:
BUF_LOCKWAITERS() just checks if there are waiters (not the actual number
of them) and it is based on newly introduced lockmgr_waiters() which
returns if the lockmgr has waiters or not. The name has been choosen
differently by old lockwaiters() in order to not confuse them.
KPI results enriched by this commit so __FreeBSD_version bumping and
manpage update will be happening soon.
'struct buf' also changes, so kernel ABI is disturbed.
Bug found by: jeff
Approved by: jeff, kib
references to a vnode with VI_OWEINACT set will force the vinactive()
call. The kernel makes no guarantees about which reference was the
last to close a file or when the actual inactive processing will
happen. The previous code was designed to preserve existing semantics
in the face of shared locks, however, this was unnecessary.
Discussed with: mckusick
BO_LOCK/UNLOCK/MTX when manipulating the bufobj.
- Create a new lock in the bufobj to lock bufobj fields independently.
This leaves the vnode interlock as an 'identity' lock while the bufobj
is an io lock. The bufobj lock is ordered before the vnode interlock
and also before the mnt ilock.
- Exploit this new lock order to simplify softdep_check_suspend().
- A few sync related functions are marked with a new XXX to note that
we may not properly interlock against a non-zero bv_cnt when
attempting to sync all vnodes on a mountlist. I do not believe this
race is important. If I'm wrong this will make these locations easier
to find.
Reviewed by: kib (earlier diff)
Tested by: kris, pho (earlier diff)
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
than rely on the lockmgr support [1]:
* bump the waiters only if the interlock is held
* let brelvp() return the waiters count
* rely on brelvp() instead than BUF_LOCKWAITERS() in order to check
for the waiters number
- Remove a namespace pollution introduced recently with lockmgr.h
including lock.h by including lock.h directly in the consumers and
making it mandatory for using lockmgr.
- Modify flags accepted by lockinit():
* introduce LK_NOPROFILE which disables lock profiling for the
specified lockmgr
* introduce LK_QUIET which disables ktr tracing for the specified
lockmgr [2]
* disallow LK_SLEEPFAIL and LK_NOWAIT to be passed there so that it
can only be used on a per-instance basis
- Remove BUF_LOCKWAITERS() and lockwaiters() as they are no longer
used
This patch breaks KPI so __FreBSD_version will be bumped and manpages
updated by further commits. Additively, 'struct buf' changes results in
a disturbed ABI also.
[2] Really, currently there is no ktr tracing in the lockmgr, but it
will be added soon.
[1] Submitted by: kib
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
always curthread.
As KPI gets broken by this patch, manpages and __FreeBSD_version will be
updated by further commits.
Tested by: Andrea Barberio <insomniac at slackware dot it>
VOP_ISLOCKED(arg, curthread). Now, VOP_ISLOCKED() and lockstatus() should
only acquire curthread as argument; this will lead in axing the additional
argument from both functions, making the code cleaner.
Reviewed by: jeff, kib
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
so that the results end up in the DDB output stream rather than the
console output stream.
This should likely also be done for the vprint() function it calls.
MFC after: 3 months
equivalent with this and so operate the switch.
That call is the only one remaining LK_EXCLUPGRADE consumer and removing
it will prepare the ground for LK_EXCLUPGRADE axing and further
lockmgr improvements.
Discussed with: jeff, ups
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
when applicable.
Aquire Giant slightly later for vnlru.
In the syncer, aquire the Giant only when a vnode belongs to the
non-MPsafe fs.
In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from
the lbolt sleep queue after the syncer state is modified, not before.
Herded by: attilio
Tested by: Peter Holm
Reviewed by: ups
MFC after: 1 week
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
prevents insmntque() from placing reallocated syncer vnode on mount
list, that causes panic in vfs_allocate_syncvnode().
Introduce MNTK_NOINSMNTQ flag, that marks the period when instmntque is
not allowed to success, instead of MNTK_UNMOUNT. The MNTK_NOINSMNTQ is
set and cleared simultaneously with MNTK_UNMOUNT, except on umount error
path, where it is cleaned just before the syncer vnode is going to be
allocated.
Reported by: Peter Jeremy <peterjeremy optushome com au>
Suggested by: tegge
Approved by: re (rwatson)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
function calls are no more generated for vop_lock.
Rename _vop_lock to vop_lock1 to satisfy tools/vnode_if.awk assumption
about vop naming conventions. This restores pre/post-condition calls.
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
- We need to allow for PRIV_VFS_MOUNT_OWNER inside a jail.
- Move security checks to vfs_suser() and deny unmounting and updating
for jailed root from different jails, etc.
OK'ed by: rwatson
file system code (mostly *_reclaim()) which look like this:
VOP_LOCK(vp);
/* examine vp */
VOP_UNLOCK(vp);
vdrop(vp);
This can now be rewritten to:
VOP_LOCK(vp);
/* examine vp */
vdropl(vp); /* will unlock vp */
MFC after: 1 week
late stages of unmount). On failure, the vnode is recycled.
Add insmntque1(), to allow for file system specific cleanup when
recycling vnode on failure.
Change getnewvnode() to no longer call insmntque(). Previously,
embryonic vnodes were put onto the list of vnode belonging to a file
system, which is unsafe for a file system marked MPSAFE.
Change vfs_hash_insert() to no longer lock the vnode. The caller now
has that responsibility.
Change most file systems to lock the vnode and call insmntque() or
insmntque1() after a new vnode has been sufficiently setup. Handle
failed insmntque*() calls by propagating errors to callers, possibly
after some file system specific cleanup.
Approved by: re (kensmith)
Reviewed by: kib
In collaboration with: kib
- Don't drop the lock just to reacquire it again to check rushjob, this
only wastes time.
- Use msleep() to drop the mutex while sleeping instead of explicitly
unlocking around tsleep.
Reviewed by: pjd
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
- Add FS_GJOURNAL flag which enables gjournal support on a file system.
- Add cg_unrefs field to the cylinder group structure which holds
number of unreferenced (orphaned) inodes in the given cylinder group.
- Add fs_unrefs field to the super block structure which holds
total number of unreferenced (orphaned) inodes.
- When file or a directory is orphaned (last reference is removed, but
object is still open), increase fs_unrefs and cg_unrefs fields,
which is a hint for fsck in which cylinder groups looks for such
(orphaned) objects.
- When file is last closed, decrease {fs,cg}_unrefs fields.
- Add VV_DELETED vnode flag which points at orphaned objects.
Sponsored by: home.pl
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
sync() and sync_fsync() without losing MNT_ASYNC. Add MNTK_ASYNC flag
which is set only when MNT_ASYNC is set and mnt_noasync is zero, and
check that flag instead of MNT_ASYNC before initiating async io.
a file system, but need to obtain a vnode. We may not be able to do it, because
all vnodes could be already in use and other processes cannot release them,
because they are waiting in "suspfs" state.
In such situation, we allow to allocate a vnode anyway.
This is a temporary fix - there is no backpressure to free vnodes allocated in
those circumstances.
MFC after: 1 week
Reviewed by: tegge
in 1999, and there are changes to the sysctl names compared to PR,
according to that discussion. The description is in sys/conf/NOTES.
Lines in the GENERIC files are added in commented-out form.
I'll attach the test script I've used to PR.
PR: kern/14584
Submitted by: babkin
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
vn_start_write() is always called earlier in the code path and calling
the function recursively may lead to a deadlock.
Confirmed by: tegge
MFC after: 2 weeks
buffers to go on the buf daemon's DIRTYGIANT queue.
- Set BO_NEEDSGIANT on ffs's devvp since the ffs_copyonwrite handler
runs in the context of the buf daemon and may require Giant.
recycling for an unrelated filesystem. I really don't like potentially
acquiring giant in the context of a giantless filesystem but there
are reasonable objections to removing the recycling from this path.
Sponsored by: Isilon Systems, Inc.
called.
- vfs_getvfs has to return a reference to prevent the returned mountpoint
from changing identities.
- Release references acquired via vfs_getvfs.
Discussed with: tegge
Tested by: kris
Sponsored by: Isilon Systems, Inc.
requires Giant. It is set in bgetvp and cleared in brelvp.
- Create QUEUE_DIRTY_GIANT for dirty buffers that require giant.
- In the buf daemon, only grab giant when processing QUEUE_DIRTY_GIANT and
only if we think there are buffers in that queue.
Sponsored by: Isilon Systems, Inc.
the target directory or file. This case should fail in the filesystem
anyway and perhaps kern_rename() should catch it.
Sponsored by: Isilon Systems, Inc.
replacement for vn_write_suspend_wait() to better account for secondary write
processing.
Close race where secondary writes could be started after ffs_sync() returned
but before the file system was marked as suspended.
Detect if secondary writes or softdep processing occurred during vnode sync
loop in ffs_sync() and retry the loop if needed.
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
has many positive effects including improved smp locking, reducing
interdependencies between mounts that can lead to deadlocks, etc.
- Add the softdep worklist and various counters to the ufsmnt structure.
- Add a mount pointer to the workitem and remove mount pointers from the
various structures derived from the workitem as they are now redundant.
- Remove the poor-man's semaphore protecting softdep_process_worklist and
softdep_flushworklist. Several threads may now process the list
simultaneously.
- Add softdep_waitidle() to block the thread until all pending
dependencies being operated on by other threads have been flushed.
- Use softdep_waitidle() in unmount and snapshots to block either
operation until the fs is stable.
- Remove softdep worklist processing from the syncer and move it into the
softdep_flush() thread. This thread processes all softdep mounts
once each second and when it is called via the new softdep_speedup()
when there is a resource shortage. This removes the softdep hook
from the kernel and various hacks in header files to support it.
Reviewed by/Discussed with: tegge, truckman, mckusick
Tested by: kris
the last reference is dropped. I forgot that vnodes can stick around
for a very long time until processes discover that they are dead. This
means that a vnode reference is not sufficient to keep the mount
referenced and even more code will be required to ref mount points.
Discovered by: kris
prevent the mount point from going away while we're waiting on the lock.
The ref does not need to persist once we have the lock because the
lock prevents the mount point from being unmounted.
MFC After: 1 week
vfs_mount_destroy waiting for this ref to hit 0. We don't print an
error if we are rebooting as the root mount always retains some refernces
by init proc.
- Acquire a mnt ref for every vnode allocated to a mount point. Drop this
ref only once vdestroy() has been called and the mount has been freed.
- No longer NULL the v_mount pointer in delmntque() so that we may release
the ref after vgone() has been called. This allows us to guarantee
that the mount point structure will be valid until the last vnode has
lost its last ref.
- Fix a few places that rely on checking v_mount to detect recycling.
Sponsored by: Isilon Systems, Inc.
MFC After: 1 week
on a lock held the last usecount ref on a vnode and the lock failed we
would not call INACTIVE. Solve this by only holding a holdcnt to prevent
the vnode from disappearing while we wait on vn_lock. Other callers
may now VOP_INACTIVE while we are waiting on the lock, however this race
is acceptable, while losing INACTIVE is not.
Discussed with: kan, pjd
Tested by: kkenn
Sponsored by: Isilon Systems, Inc.
MFC After: 1 week
prototypes, as the majority of new functions added have been in this
style. Changing prototype style now results in gcc noticing that the
implementation of vn_pollrecord() has a 'short' argument instead of
'int' as prototyped in vnode.h, so correct that definition. In practice
this didn't matter as only poll flags in the lower 16 bits are used.
MFC after: 1 week
The race is very real, but conditions needed for triggering it are rather
hard to meet now.
When gjournal will be committed (where it is quite easy to trigger) we need
to fix it.
For now, verify if it is really hard to trigger.
Discussed with: kan
The PR and patch have the details. The ultimate fix requires architectural
changes and clarifications to the VFS API, but this will prevent the system
from panicking when someone does "ls /dev" while running in a shell under the
linuxulator.
This issue affects HEAD and RELENG_6 only.
PR: 88249
Submitted by: "Devon H. O'Dell" <dodell@ixsystems.com>
MFC after: 3 days
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
so we are ready for mpsafevfs=1 by default on sparc64 too. I have been
running this on all my sparc64 machines for over 6 months, and have not
encountered MD problems.
MFC after: 1 week
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode
lock aggravates an existing race condition. It is also undesirable
according to the commit log for 1.631.
Fix the tiny race condition that remains by rechecking the vnode
state after grabbing the vnode lock and grabbing the vnode interlock.
Fix the problem of other threads being starved (which 1.636 attempted
to fix by removing LK_NOWAIT) by calling uio_yield() periodically
in vlrureclaim(). This should be more deterministic than hoping
that VOP_LOCK() without LK_NOWAIT will block, which may not happen
in this loop.
Reviewed by: kan
MFC after: 5 days
is a workaround for non-symetric teardown of the file systems at
shutdown with respect to the mount order at boot. The proper long term
fix is to properly detach devfs from the root mount before unmounting
each, and should be implemented, but since the problem is non-harmful,
this temporary band-aid will prevent false positive bug reports and
unnecessary error output for 6.0-RELEASE.
MFC after: 3 days
Tested by: pav, pjd
vnode is inactivated), possibly leading to a NULL dereference when
checking if the mount wants knotes to be activated in the VOP hooks.
So, we add a new vnode flag VV_NOKNOTE that is only set in getnewvnode(),
if necessary, and check it when activating knotes.
Since the flags are not erased when a vnode is being held, we can safely
read them.
Reviewed by: kris@
MFC after: 3 days
vnlru proc is extremely inefficient, potentially iteration over tens of
thousands of vnodes without blocking. Droping Giant allows other threads
to preempt us although we should revisit the algorithm to fix the runtime
problems especially since this may hold up all vnode allocations.
- Remove the LK_NOWAIT from the VOP_LOCK in vlrureclaim. This provides
a natural blocking point to help alleviate the situation described above
although it may not technically be desirable.
- yield after we make a pass on all mount points to prevent us from
blocking other threads which require Giant.
MFC after: 2 weeks
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
are actually caused by a buf with both VNCLEAN and VNDIRTY set. In
the traces it is clear that the buf is removed from the dirty queue while
it is actually on the clean queue which leaves the tail pointer set.
Assert that both flags are not set in buf_vlist_add and buf_vlist_remove.
Sponsored by: Isilon Systems, Inc.
Approved by: re (blanket vfs)
ref while we're calling vgone(). This prevents transient refs from
re-adding us to the free list. Previously, a vfree() triggered via
vinvalbuf() getting rid of all of a vnode's pages could place a partially
destructed vnode on the free list where vtryrecycle() could find it. The
first call to vtryrecycle would hang up on the vnode lock, but when it
failed it would place a now dead vnode onto the free list, and another
call to vtryrecycle() would free an already free vnode. There were many
complications of having a zero ref count while freeing which can now go
away.
- Change vdropl() to release the interlock before returning. All callers
now respect this, so vdropl() directly frees VI_DOOMED vnodes once the
last ref is dropped. This means that we'll never have VI_DOOMED vnodes
on the free list.
- Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and
v_decr_useonly(). The incr/decr split is so that incr usecount can
return with the interlock still held while decr drops the interlock so
it can call vdropl() which will potentially free the vnode. The calling
function can't drop the lock of an already free'd node. v_decr_useonly()
drops a usecount without droping the hold count. This is done so the
usecount reaches zero in vput() before we recycle, however the holdcount
is still 1 which prevents any new references from placing the vnode
back on the free list.
- Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We
wouldn't want vnlrureclaim() to bump the usecount since this has
different semantics. Also change vnlrureclaim() to do a NOWAIT on the
vn_lock. When this function runs we're usually in a desperate situation
and we wouldn't want to wait for any specific vnode to be released.
- Fix a bunch of misc comments to reflect the new behavior.
- Add vhold() and vdrop() to vflush() for the same reasons that we do in
vlrureclaim(). Previously we held no reference and a vnode could have
been freed while we were waiting on the lock.
- Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should
really be rethought before it's reintroduced.
- vgonel() always returns with the vnode locked now and never puts the
vnode back on a free list. The vnode will be freed as soon as the last
reference is released.
Sponsored by: Isilon Systems, Inc.
Debugging help from: Kris Kennaway, Peter Holm
Approved by: re (blanket vfs)
of the clean and dirty lists. This is in an attempt to catch the wrong
bufobj problem sooner.
- In vgonel() don't acquire an extra reference in the active case, the
vnode lock and VI_DOOMED protect us from recursively cleaning.
- Also in vgonel() clean up some stale comments.
Sponsored by: Isilon Systems, Inc.
Approved by: re (blanket vfs)
anyway and it's not used outside of vfs_subr.c.
- Change vgonel() to accept a parameter which determines whether or not
we'll put the vnode on the free list when we're done.
- Use the new vgonel() parameter rather than VI_DOOMED to signal our
intentions in vtryrecycle().
- In vgonel() return if VI_DOOMED is already set, this vnode has already
been reclaimed.
Sponsored by: Isilon Systems, Inc.
events could be added to cover other interesting details.
- Add some VNASSERTs to discover places where we access vnodes after
they have been uma_zfree'd before we try to free them again.
- Add a few more VNASSERTs to vdestroy() to be certain that the vnode is
really unused.
Sponsored by: Isilon Systems, Inc.
UFS by:
- Making the pre and post hooks for the VOP functions work even when
DEBUG_VFS_LOCKS is not defined.
- Moving the KNOTE activations into the corresponding VOP hooks.
- Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct
mount that permits filesystems to disable the new behavior.
- Creating a default VOP_KQFILTER function: vfs_kqfilter()
My benchmarks have not revealed any performance degradation.
Reviewed by: jeff, bde
Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
1. Copy a NULL-terminated string into a fixed-length buffer, and
2. copyout that buffer to userland,
we really ought to
0. Zero the entire buffer
first.
Security: FreeBSD-SA-05:08.kmem
drop the check+initialization for a straight initialization. Also
assert that curthread will never be NULL just to be sure.
Discussed with: rwatson, peter
MFC after: 1 week
are set when we attempt to remove a buffer from a queue we should panic.
Hopefully this will catch the source of the wrong bufobj panics.
Sponsored by: Isilon Systems, Inc.
vtryrecycle(). We could sometimes get into situations where two threads
could try to recycle the same vnode before this.
- vtryrecycle() is now responsible for returning the vnode to the free list
if it fails and someone else hasn't done it.
- Make a new function vfreehead() which moves a vnode to the head of the
free list and use it in vgone() to clean up that code a bit.
Sponsored by: Isilon Systems, Inc.
Reported by: pho, kkenn
do not correctly deal with failures. This presently risks deadlock
problems if dependency processing is held up by failures to allocate
a vnode, however, this is better than the situation with the failures.
Sponsored by: Isilon Systems, Inc.
potential lock order reversal. Also, don't unlock the vnode if this
fails, lockmgr has already unlocked it for us.
- Restructure vget() now that vn_lock() does all of VI_DOOMED checking
for us and also handles the case where there is no real lock type.
- If VI_OWEINACT is set, we need to upgrade the lock request to EXCLUSIVE
so that we can call inactive. It's not legal to vget a vnode that hasn't
had INACTIVE called yet.
Sponsored by: Isilon Systems, Inc.
to root cause on exactly how this happens.
- If the assert is disabled, we presently try to handle this case, but the
BUF_UNLOCK was missing. Thus, if this condition ever hit we would leak
a buf lock.
Many thanks to Peter Holm for all his help in finding this bug. He really
put more effort into it than I did.
one to become available for one second and then return ENFILE. We
can run out of vnodes, and there must be a hard limit because without
one we can quickly run out of KVA on x86. Presently the system can
deadlock if there are maxvnodes directories in the namecache. The
original 4.x BSD behavior was to return ENFILE if we reached the max,
but 4.x BSD did not have the vnlru proc so it was less profitable to
wait.
on filesystems which safely support them. It appears that many
network filesystems specifically are not shared lock safe.
Sponsored by: Isilon Systems, Inc.
vnodes whose names it caches, so we no longer need a `generation
number' to tell us if a referenced vnode is invalid. Replace the use
of the parent's v_id in the hash function with the address of the
parent vnode.
Tested by: Peter Holm
Glanced at by: jeff, phk
vhold()s us.
- Avoid an extra mutex acquire and release in the common case of vgonel()
by checking for OWEINACT at the start of the function.
- Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our
shared lock if it fails.
Sponsored by: Isilon Systems, Inc.
now always allocates a new vnode.
- Define a new function, vnlru_free, which frees vnodes from the free list.
It takes as a parameter the number of vnodes to free, which is
wantfreevnodes - freevnodes when called from vnlru_proc or 1 when
called from getnewvnode(). For now, getnewvnode() still tries to reclaim
a free vnode before creating a new one when we are near the limit.
- Define a function, vdestroy, which handles the actual release of memory
and teardown of locks, etc. This could become a uma_dtor() routine.
- Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This
keeps more unreferenced vnodes around so that files which have only
been stat'd are less likely to be kicked out of the system before we
have a chance to read them, etc. These vnodes may still be freed via
the normal vnlru_proc() routines which may some day become a real lru.
before it can call VOP_INACTIVE(). This must use the EXCLUPGRADE path
because we may violate some lock order with another locked vnode if
we drop and reacquire the lock. If EXCLUPGRADE fails, we mark the
vnode with VI_OWEINACT. This case should be very rare.
- Clear VI_OWEINACT in vinactive() and vbusy().
- If VI_OWEINACT is set in vgone() do the VOP_INACTIVE call here as well.
Sponsored by: Isilon Systems, Inc.
- Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so
no one else attempts to grow a dependency on them.
- Now that objects with pages hold the vnode we don't have to do unlocked
checks for the page count in the vm object in VSHOULDFREE. These three
macros could simply check for holdcnt state transitions to determine
whether the vnode is on the free list already, but the extra safety
the flag affords us is probably worth the minimal cost.
- The leafonly sysctl and code have been dead for several years now,
remove the sysctl and the code that employed it from vtryrecycle().
- vtryrecycle() also no longer has to check the object's page count as
the object holds the vnode until it reaches 0.
Sponsored by: Isilon Systems, Inc.
to use only the holdcnt to determine whether a vnode may be recycled,
simplifying the V* macros as well as vtryrecycle(), etc.
Sponsored by: Isilon Systems, Inc.
vtryrecycle(). All obj refs also ref the vnode.
- Consistently use v_incr_usecount() to increment the usecount. This will
be more important later.
Sponsored by: Isilon Systems, Inc.
- Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do
writing ops without suspending. This could suspend the vlruproc which
should not be a problem under normal circumstances.
- Manually implement VMIGHTFREE in vlrureclaim as this was the only instance
where it was used.
- Acquire a lock before calling vgone() as it now requires it.
- Move the acquisition of the vnode interlock from vtryrecycle() to
getnewvnode() so that if it fails we don't drop and reacquire the
vnode_free_list_mtx.
- Check for a usecount or holdcount at the end of vtryrecycle() in case
someone grabbed a ref while we were recycling. Abort the recycle, and
on the final ref drop this vnode will be placed on the head of the free
list.
- Move the redundant VOP_INACTIVE protection code into the local
vinactive() routine to avoid code bloat.
- Keep the vnode lock held across calls to vgone() in several places.
- vgonel() no longer uses XLOCK, instead callers must hold an exclusive
vnode lock. The VI_DOOMED flag is set to allow other threads to detect
a vnode which is no longer valid. This flag is set until the last
reference is gone, and there are no chances for a new ref. vgonel()
holds this lock across the entire function, which greatly simplifies
logic.
_ Only vfree() in one place in vgone() not three.
- Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock
in the LK_NOWAIT case. In other cases, check after we have slept and
acquired an exlusive lock. This will simulate the old vx_wait()
behavior.
Sponsored by: Isilon Systems, Inc.
has been set. Assert that this is the case so that we catch filesystems
who are using naked VOP_LOCKs in illegal cases.
Sponsored by: Isilon Systems, Inc.
considered to be as good as an exclusive lock, although there is still a
possibility of someone acquiring a VOP LOCK while xlock is held.
Sponsored by: Isilon Systems, Inc.
List devfs_dirents rather than vnodes off their shared struct cdev, this
saves a pointer field in the vnode at the expense of a field in the
devfs_dirent. There are often 100 times more vnodes so this is bargain.
In addition it makes it harder for people to try to do stypid things like
"finding the vnode from cdev".
Since DEVFS handles all VCHR nodes now, we can do the vnode related
cleanup in devfs_reclaim() instead of in dev_rel() and vgonel().
Similarly, we can do the struct cdev related cleanup in dev_rel()
instead of devfs_reclaim().
rename idestroy_dev() to destroy_devl() for consistency.
Add LIST_ENTRY de_alias to struct devfs_dirent.
Remove v_specnext from struct vnode.
Change si_hlist to si_alist in struct cdev.
String new devfs vnodes' devfs_dirent on si_alist when
we create them and take them off in devfs_reclaim().
Fix devfs_revoke() accordingly. Also don't clear fields
devfs_reclaim() will clear when called from vgone();
Let devfs_reclaim() call dev_rel() instead of vgonel().
Move the usecount tracking from dev_rel() to devfs_reclaim(),
and let dev_rel() take a struct cdev argument instead of vnode.
Destroy SI_CHEAPCLONE devices in dev_rel() (instead of
devfs_reclaim()) when they are no longer used. (This
should maybe happen in devfs_close() instead.)
patch from kan@).
Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close. This is not yet a generally safe function, but for this very
specific use it is safe. This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
to off.
- Protect access to mnt_kern_flag with the mointpoint mutex.
- Remove some KASSERTs which are not legal checks without the appropriate
locks held.
- Use VCANRECYCLE() rather than rolling several slightly different
checks together.
- Return from vtryrecycle() with a recycled vnode rather than a locked
vnode. This simplifies some locking.
- Remove several GIANT_REQUIRED lines.
- Add a few KASSERTs to help with INACT debugging.
Sponsored By: Isilon Systems, Inc.
unhappiness lately.
As far as I can tell, no files that have made it safely to disk
have been endangered, but stuff in transit has been in peril.
Pointy hat: phk
TAILQ_FOREACH_SAFE().
Loose the error pointer argument and return any errors the normal way.
Return EAGAIN for the case where more work needs to be done.
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
split the conversion of the remaining three filesystems out from the root
mounting changes, so in one go:
cd9660:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
nfs(client):
Convert to nmount (the simple way, mount_nfs(8) is still necessary).
Add omount compat shims.
Drop COMPAT_PRELITE2 mount arg compatibility.
ffs:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
Remove vfs_omount() method, all filesystems are now converted.
Remove MNTK_WANTRDWR, handling RO/RW conversions is a filesystem
task, and they all do it now.
Change rootmounting to use DEVFS trampoline:
vfs_mount.c:
Mount devfs on /. Devfs needs no 'from' so this is clean.
symlink /dev to /. This makes it possible to lookup /dev/foo.
Mount "real" root filesystem on /.
Surgically move the devfs mountpoint from under the real root
filesystem onto /dev in the real root filesystem.
Remove now unnecessary getdiskbyname().
kern_init.c:
Don't do devfs mounting and rootvnode assignment here, it was
already handled by vfs_mount.c.
Remove now unused bdevvp(), addaliasu() and addalias(). Put the
few necessary lines in devfs where they belong. This eliminates the
second-last source of bogo vnodes, leaving only the lemming-syncer.
Remove rootdev variable, it doesn't give meaning in a global context and
was not trustworth anyway. Correct information is provided by
statfs(/).
initializations but we did have lofty goals and big ideals.
Adjust to more contemporary circumstances and gain type checking.
Replace the entire vop_t frobbing thing with properly typed
structures. The only casualty is that we can not add a new
VOP_ method with a loadable module. History has not given
us reason to belive this would ever be feasible in the the
first place.
Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc.
Give coda correct prototypes and function definitions for
all vop_()s.
Generate a bit more data from the vnode_if.src file: a
struct vop_vector and protype typedefs for all vop methods.
Add a new vop_bypass() and make vop_default be a pointer
to another struct vop_vector.
Remove a lot of vfs_init since vop_vector is ready to use
from the compiler.
Cast various vop_mumble() to void * with uppercase name,
for instance VOP_PANIC, VOP_NULL etc.
Implement VCALL() by making vdesc_offset the offsetof() the
relevant function pointer in vop_vector. This is disgusting
but since the code is generated by a script comparatively
safe. The alternative for nullfs etc. would be much worse.
Fix up all vnode method vectors to remove casts so they
become typesafe. (The bulk of this is generated by scripts)
At some point later the syncer will unlearn about vnodes and the filesystems
method called by the syncer will know enough about what's in bo_private to
do the right thing.
[1] Ok, I know, but I couldn't resist the pun.
We keep si_bsize_phys around for now as that is the simplest way to pull
the number out of disk device drivers in devfs_open(). The correct solution
would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth
when filesystems sit on GEOM, so don't bother for now.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
without a mountpoint. In this scenario, there's no useful source for
a label on the vnode, since we can't query the mountpoint for the
labeling strategy or default label.
