Commit Graph

12285 Commits

Author SHA1 Message Date
Edwin Groothuis
f281c10a84 Replace description on how to do CVS imports on this module with a
description on how to do SVN imports on this module.

Approved by:	bde (implicit)
2008-08-08 04:37:43 +00:00
Edwin Groothuis
feacbe24de MFV on tzdata2008e:
- Fix dates in 2008/2009 for Africa/Mauritius.
- Leap second notification for the end of 2008.

Approved by:	bde (mentor, implicit), des
MFC after:	1 week
2008-08-08 04:29:39 +00:00
Edwin Groothuis
a88fb43c2a MFV of tzdata2008d
- Mauritius will have a DST experiment between 2008-11-01 and 2009-03-31.
- Add/Fix historical data for C-Eur, the SovietZone, Germany,
  Bahamas, San Luis.
- Add information about West Para (America/Santarem)
- America/Eirunepe and America/Rio_Branco go to UTC-4

Approved by:	bde (mentor, implicit), des
MFC after:	1 week
2008-08-08 04:20:36 +00:00
Edwin Groothuis
01910fcbf4 MFV of tzdata2008c
- Africa/Morocco will have DST in 2008.
- Asia/Choibalsan should be GMT+08:00.
- Asia/Pakistan will have DST in 2008.

Also set all the svn:eol-style properties to native.

Approved by:	bde (mentor, implicit), des
MFC after:	1 week
2008-08-08 03:48:10 +00:00
Edwin Groothuis
9116c0d4e2 Revert the change in leapseconds for 31 december 2008, so I can
properly bootstrap the merge history on this module.

Approved by:	bde (implicit)
2008-08-08 03:18:30 +00:00
Edwin Groothuis
4920bffd86 Cleanup (cont)
Remove Theory, which isn't part of the zoneinfo module but came out
of /head/usr.sbin/zic (and isn't installed from there neither).

Approved by:	bde (implicit)
MFC after:	1 week
2008-08-08 02:55:34 +00:00
Edwin Groothuis
af252fa7e6 Flatting the vendor dist tree of tzdata.
Approved by:	bde (mentor, implicit), des
2008-08-07 23:59:20 +00:00
John Baldwin
414e7679cb Permit Giant to be passed as the explicit interlock either to
msleep/mtx_sleep or the various cv_*wait*() routines.  Currently, the
"unlock" behavior of PDROP and cv_wait_unlock() with Giant is not
permitted as it is will be confusing since Giant is fully unrecursed and
unlocked during a thread sleep.

This is handy for subsystems which wish to allow unlocked drivers to
continue to use Giant such as CAM, the new TTY layer, and the new USB
stack.  CAM currently uses a hack that I told Scott to use because I
really didn't want to permit this behavior, and the TTY and USB patches
both have various patches to permit this.

MFC after:	2 weeks
2008-08-07 21:00:13 +00:00
John Baldwin
2cdcea5ed8 Document the new return values for sleepq_abort(), sleepq_broadcast(), and
sleepq_signal().

Prodded by:	attilio
2008-08-07 20:47:01 +00:00
Christian Brueffer
44c81fb8b3 Comment out information about Jumbo Frame support, it's not
implemented yet.  While here, fix a whitespace nit.

Discussed with:		delphij
2008-08-07 07:32:40 +00:00
Andrew Thompson
7f05f04afd Remove a comment about bridging wireless client, the new net80211 vap code
supports this.
2008-08-04 23:16:07 +00:00
Robert Watson
0dda506c4c DDB scripting, textdumps, output capture, etc, all will appear in
FreeBSD 7.1 before 8.0 ships.

Spotted by:	Ulrich Spoerlein <uspoerlein at gmail dot com>
MFC after:	3 days
2008-08-03 14:14:43 +00:00
Warner Losh
a653651375 Bumpd date
Minor word smithing on the need for newer firmware.
2008-08-02 23:41:10 +00:00
Warner Losh
1edd9c5b7a Add entry for Prism-3 based Siemens SpeedStream card. It has
identical packaging and model numbers, but has had the Prism-II chips
replaced by Prism-3.  The wi driver was just updated with the new
entry.
2008-08-02 23:29:35 +00:00
Sam Leffler
db3f3bde0e Try to fixup last (inadvertent) commit: firmware_drain was never added so
yank it's description; likewise for the FIRMWARE_WAIT flag to firmware_put.

For the record, the last commit was to cleanup various mistakes and correct
the example of embedding to reflect the npe firmware now being distributed
with the system.
2008-08-02 17:51:38 +00:00
Sam Leffler
6e0186d5ee add callout_schedule; besides being useful it also improves
compatibility with other systems

Reviewed by:	ed, battlez
2008-08-02 17:42:38 +00:00
Colin Percival
cd44e09c66 Document new IDSIgnorePaths directive. 2008-08-02 00:13:51 +00:00
Dag-Erling Smørgrav
5373c6c718 According to a proposed Norwegian standard for alphabetization of which
I've obtained a draft, <u:> is indeed equivalent to u (to my surprise),
and <th> sorts immediately after z.

The correct ordering is algorithmic (based on the EOR) and can not be
accurately represented as a table.
2008-07-30 15:37:13 +00:00
Robert Noland
708c907f6b Add my entry with a pointer to garga (mentor)
Approved by:	garga (mentor)
2008-07-30 01:05:13 +00:00
Dag-Erling Smørgrav
a6fca50fd7 In the previous commit, no_NO should have been replaced with nb_NO in the
LOCALES list.  Since no_NO was still in LOCALES, make tried to build the
corresponding .out files, but couldn't since the .src files were gone.  I
did not notice this because I still had the old .out files in my .OBJDIR.
Thanks to kib@ for the heads-up.
2008-07-29 11:32:42 +00:00
Ollivier Robert
0f645c3e56 Macbook [Pro] keyboards in AZERTY don't need shift to get to '~'.
MFC after:	3 days
2008-07-29 08:07:27 +00:00
Dag-Erling Smørgrav
5c86b693d6 In some cases (such as LC_COLLATE), nb_NO and nn_NO are identical, and it
makes sense to have them both link to no_NO.

In other cases (such as LC_TIME), they differ, and the correct solution
is to have no_NO link to nb_NO, rather than the other way around.o

MFC after:	2 weeks
2008-07-28 21:50:21 +00:00
Dag-Erling Smørgrav
d3fbed0e09 Add collation sequence for no_NO. The same sequence applies to nb_NO
and nn_NO, which are symlinked to no_NO.

The patch in the PR contained a number of errors apparently based on
(sometimes incorrect) pronunciation; for instance, v and w are
distinct letters and should be collated in that order, even if they
are pronounced the same, while <u:> should be collated with u, even
though it is often mispronounced as y.  For lack of a solid reference,
I have taken sv_SE and simply changed the last three letters of the
alphabet.

PR:		conf/51920
MFC after:	2 weeks
2008-07-28 21:33:34 +00:00
Warner Losh
f1345f5393 Add a few clarifications to this man page. Also, add a table that
describes the minimum versions of each feature and each chipset type
supported by this driver.  Basically, unless you have a very modern
version of firmware on a Prism card, you won't be able to use these
cards for much on modern networks that have any kind of protection
enabled, except for the few WEP-only stranglers that appear at some
conferences...
2008-07-26 18:31:39 +00:00
Maxim Konovalov
c96ef7e002 o DragonFly BSD 2.0 added. 2008-07-23 14:25:39 +00:00
Warner Losh
a678ba4ec8 Turn of SSP for mips for now until support is added to the base
architecture.
2008-07-23 06:14:21 +00:00
Philip M. Gollucci
fc2b30de6c Adding myself as a new ports committer
Reviewed by:    gabor (mentor)
Approved by:	araujo (mentor)
2008-07-23 01:37:04 +00:00
Wesley Shields
5f4ddc9610 Retroactively add my entry and link to garga. Forgot to do this when I
got my commit bit.
2008-07-23 01:19:56 +00:00
VANHULLEBUS Yvan
c1842f7d5d Added me as a commiter
Approved by:	gnn (mentor)
2008-07-22 16:01:57 +00:00
Pawel Jakub Dawidek
7f41115ef6 Implement the following macros for completeness:
SYSCTL_QUAD()
	SYSCTL_ADD_QUAD()
	TUNABLE_QUAD()
	TUNABLE_QUAD_FETCH()

Now we can use 64bit tunables on 32bit systems.
2008-07-21 15:05:25 +00:00
Maxim Konovalov
dc5aa2110e o Document "show conifhk", wording from r180610 commit log.
Reviewed by:	rwatson
2008-07-21 10:03:02 +00:00
Lars Engels
fdec4b4190 Properly underline force_depend's parameter.
Reviewed by:	brueffer
2008-07-20 10:06:14 +00:00
Olivier Houchard
ad8abd6c4d Disable SSP on arm for the time being.
The segfaults when using SSP seem to be a gcc bug, a patch is available
in the gcc bugzilla, and will be imported once it's committed
into the official gcc tree.
2008-07-19 00:19:16 +00:00
David Malone
167fcf0511 Add a man page for the DNS accept filter. 2008-07-18 14:46:01 +00:00
Christian Brueffer
960e10f9e9 Manpage for the et(4) driver.
Obtained from:	DragonFly
2008-07-14 18:15:43 +00:00
Remko Lodder
1091cc09ef More explicitly mention that we support the 2920C with the ahc driver.
PR:		125535
Submitted by:	Bob Bishop <rb at gid dot co dot uk>
MFC after:	3 days
2008-07-13 13:56:21 +00:00
Daniel Gerzo
6b527d112c Back-out my previous change. See the thread at
http://lists.freebsd.org/pipermail/cvs-all/2008-July/263779.html
2008-07-10 11:24:41 +00:00
Weongyo Jeong
f4841b5380 the driver don't support AD-HOC mode currently. 2008-07-10 08:44:02 +00:00
Daniel Gerzo
1249a78860 - nested functions are a GCC extensions and should not be used
Submitted by:	gahr
MFC after:	3 days
2008-07-09 14:04:28 +00:00
Poul-Henning Kamp
6c6c706891 Leapsecond at end of december. 2008-07-09 06:59:14 +00:00
Stacey Son
753335480e Added myself to the src committers graph.
Approved by:	jb (mentor)
2008-07-08 15:36:44 +00:00
Weongyo Jeong
4951c55c3c remove a useless example.
Pointed by:	imp
2008-07-08 04:15:07 +00:00
Bjoern A. Zeeb
dea0ed6690 Add a `show cpusets' DDB command to print numbered root and
assigned CPU affinity sets.

Reviewed by:	brooks
2008-07-07 21:32:02 +00:00
David Malone
0d1532e0ef Update man page for addition of BIOCSETFNR. Subversion didn't want
to commit this at the same time for some reason.
2008-07-07 09:27:02 +00:00
Weongyo Jeong
55f2aa7451 correct device name errors and wrong informations that currently malo(4)
don't support ad-hoc mode and there's no a man page like malofw(4).
2008-07-07 02:39:39 +00:00
Warner Losh
278324026c Add two corega cards and annotate 8041 V2 chipset. 2008-07-06 06:24:02 +00:00
John Baldwin
a78c3ed89c Remove the sbsh(4) driver. No one responded to requests for testing the
MPSAFE patches on current@ and stable@.  This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context).  As
such, the driver shouldn't be working reliably even on 4.x.
2008-07-04 21:24:35 +00:00
John Baldwin
e9a31041c0 Remove the sbni(4) driver. No one responded to calls to test it on
current@ and stable@.
2008-07-04 21:06:57 +00:00
John Baldwin
67c58e8a6e Remove the cnw(4) driver. No one responded to calls to test it on current@
and stable@.  It also is a driver for an older non-802.11 wireless PC card
that is quite slow in comparison to say, wi(4).  I know Warner wants this
driver axed as well.
2008-07-04 19:13:15 +00:00
John Baldwin
2c6298572e Remove the oltr(4) driver. No one responded to calls for testing on
current@ and stable@ for the locking patches.  The driver can always be
revived if someone tests it.

This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
2008-07-04 18:58:53 +00:00