In some cases it seems that the PHY mode can only be identified by
matching against the corresponding device node name in the FDT. r334880
broke this for the case where the node name contains a unit address.
Fix the problem by allowing a match in that case.
Reviewed by: andrew, sbruno
Tested by: sbruno
Differential Revision: https://reviews.freebsd.org/D16259
when parsing the phy type, however this is included in the length returned
by OF_getprop. To fix this stop ignoring the terminator.
PR: 228828
Reported by: sbruno
Sponsored by: DARPA, AFRL
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14645
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Previously we set the csum_l3 flag for IPv4 and IPv6, but only IPv4
should have header checksumming applied.
Prompted by Linux commit fa6d7cb5d76cf0467c61420fc9238045aedfd379.
Reviewed by: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13366
No longer return ENXIO when trying to send an IPv6 packet in
nicvf_sq_add_hdr_subdesc().
Restructure the code so that the upper layer protocol parts are
agnostic of the L3 protocol (and no longer specific to IPv4).
With this basic IPv6 packets go through. We are still seeing
weird behaviour which needs further diagnosis.
PR: 223669
In collaboration with: emaste
MFC after: 3 days
The driver is currently hardcoded to force promiscuous mode, so all of
the MAC filtering code is presently unused and multicast should "just
work." Report to the higher layers that multicast is supported.
PR: 223573
Reported by: bz
Sponsored by: The FreeBSD Foundation, Packet.net (hardware)
Previously we passed tx packets to hardware via nicvf_tx_mbuf_locked
and then to the BPF tap, with a possibly invalid mbuf which would result
in a panic.
PR: 223600
Discussed with: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation, Packet.net (hardware)
Improve existing BGX detection and adjust it to support both
new and older ThunderX firmwares. Match BGX FDT nodes by name
and reg. Match PHY instances by qlm-mode and name.
Tested on Firmware Version: 2016-09-30 09:12:11
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D9863
structure:
if_gethwtsomax(), if_sethwtsomax() - if_hw_tsomax
if_gethwtsomaxsegcount(), if_sethwtsomaxsegcount() - if_hw_tsomaxsegcount
if_gethwtsomaxsegsize(), if_sethwtsomaxsegsize() - if_hw_tsomaxsegsize
Update em and vnic drivers which had already been coverted to use accessor
functions for the other ifnet structure members.
Reviewed by: erj
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8544
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
Fix panics which were present when BGX and PF module were unloaded.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6346
Add directory structure and fix dependencies to be able to
build and use Cavium VNIC driver as a module.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6345
Enable previously added code for MTU handling (based on
Cavium 1.0 driver released on BSD license).
This commit enables possibility to change MTU on VNIC driver.
Obtained from: Semihalf
Sponsored by: Cavium
Number of free Tx descriptors does not need to be locked since
it can be modified atomically between SND and CQ tasks.
It will also block Tx routine from sending packets while CQ will not
be able to free descriptors.
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6266
Based on v1.0 driver provided by Cavium under BSD license.
Support in-hardware RSS to distribute IP, UDP and TCP traffic
among available RX Queues and hence multiple CPUs.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6230
Delegate interrupts and completion tasks on separate CPUs
for each VNIC.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6229
Due to the bug in the number of 'GATHER' subdescriptors for TSO
packets, VNIC was not able to transmit more than one DMA segment
with TSO enabled.
Obtained from: Semihalf
Sponsored by: Cavium
The previous values caused the callout thread stall for 100ms each 2s
if no link is present. Dtrace analysis showed that it has significant
impact on overall interrupt performance.
Decrease these values by a factor of 100.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: zbb
Differential Revision: https://reviews.freebsd.org/D5854
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
nic->num_vf_en is set based on the number of the enabled LMACs.
This number should not be overwritten later by any routine.
Instead it should fail PCI_IOV_ADD_VF() so that available VFs
with the corresponding LMACs will attach whereas other, disabled
VFs will fail with the proper error code.
Error signaling (due to improper number of VFs requested) is also moved
from PCI_IOV_INIT() to PCI_IOV_ADD_VF().
This will be reworked when multiple queue sets are enabled but for
now this is the correct behavior of the driver.
Obtained from: Semihalf
Sponsored by: Cavium
If the driver is not active or link is down the packet could remain
non-writeable. This commit makes all mbufs enqueued to the driver's
ring buffer to have correct attributes.
Pointed out by: wma
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5800
The FDT description is as follows:
- phy-handle, reg, qlm-mode, mac-address are under nodes in bgx0/1 node
- phy nodes (pointed by phy-handle) are under MDIO even though they may
not be connected through to MDIO. In those nodes they do not contain
MAC address or etc.
This commit changes parsing of the FDT nodes for BGX so that it can
obtain correct MAC address for a given PHY.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5781
- Avoid memory leak when nicvf_tx_mbuf_locked() fails
- Introduce nicvf_xmit_locked() routine that uses drbr_peek(),
drbr_advance() or drbr_putback() for a specific ifnet.
This gives more clear and efficient design as well as
prevents from dropping mbufs that where not sent due to temporary
lack of descriptors.
- Add missing ETHER_BPF_MTAP() hook
Pointed out by: yongari
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5534
- Do not mark CSUM_IP_CHECKED and CSUM_IP_VALID on IPv6 packets.
IPv6 does not have checksums by definition.
- Set SCTP packets csum_flags CSUM_SCTP_VALID instead of
CSUM_DATA_VALID and skip csum_data
- Set csum_data simply as 0xffff without byteswap
Pointed out by: yongari
Reviewed by: yongari, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5537
It is not necessary as entries are being manipulated under lock.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5536
TSO packets will signal segments TX completion in the separate CQ
descriptors. Each CQ descriptor for HW TSO will point to the same
SQ entry.
Do not invoke nicvf_put_sq_desc() for secondary segments to avoid
free_cnt corruption and eventually integer overflow that will result
in the negative free_cnt value and hence impossibility of further
transmission.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5535
Do not modify NIC_QSET_CQ_0_7_HEAD manually, especially
in non-atomic context.
It doesn't seem to be necessary to recreate CQ head after
interrupt clearing too.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5533
On Pass2.0 can trigger interrupt on both timer and CQ count.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5423
This is not needed and causes revid register of the PCI
configuration space to clear on Pass2.0.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5421
Don't postpone Tx if the Tx lock can be acquired now.
This gives 3x better performance on egress.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5325
VNIC manages counters in hardware hence it is desired to have this
option enabled to avoid redundant stats update in ether_input_internal().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5323
Support for software LRO when enabled in the capabilities
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5321
- The network controller verifies Rx TCP/UDP/SCTP checksums by default.
Communicate this to the stack when the packet is not marked as erroneous
to avoid redundant checksum calculation in kernel.
- It is not uncommon to get the mbuf with m_len that is less than
the minimal size for the IP, TCP, UDP, etc. when HW checsumming
is enabled. To avoid data corruption performed by the HW that is
intended to write IP and TCP/UDP/SCTP checksums to the data segment,
the mbuf needs to be pulled up by the required number of bytes.
- Make sure that one can modify the mbufs that require checsum calculation
rather than check for NULL mbuf on each transmission.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5320
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
ofw_bus_get_node() must be tested against negative values since
missing parent bus method will result in calling the default method
which simply returns (-1): sys/dev/ofw/ofw_bus_if.m
This was lost in the review process.
Obtained from: Semihalf
Sponsored by: Cavium
Some firmware revisions provide different DTB tree that include
odd MDIO placement in the tree.
This commit adds support for 2 new buses:
- MRML bridge (PCIB subordinate)
- MDIO nexus (MRML subordinate)
This allows for the correct MDIO attachment with both - new and old
firmware.
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5070
Search for BGX node in DTS in two ways:
1. Try to find it uder root node first
2. If not found under root, find the top level PCI bridge node
and search all nodes below it until appropriate BGX node is found.
Move search code to another function to make the code more clear.
Remove unused variable by the way.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5066
This commit adds support for MDIO present in the ThunderX SoC.
From the FDT point of view it is compatible with "octeon-3860-mdio"
however only C22 mode is used.
The code also implements lmac_if interface functions.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
