Commit Graph

88994 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
f34d85e0ec MFi386: r241301
add detection of serial console presence to btx and boot2-like blocks
2012-11-10 12:25:27 +00:00
Andriy Gapon
7631b580ff zfs_ioc_destroy_snaps_nvl: remove disk device entries for zvol snapshots
... before trying to destroy the zvol snapshots themselves.

PR:		kern/173442
Reported by:	Petri Helenius <petri@helenius.fi>,
		mm
Obtained from:	Brian Behlendorf <behlendorf1@llnl.gov>,
		Illumos Bug #3170
Tested by:	Petri Helenius <petri@helenius.fi>
MFC after:	10 days
2012-11-10 12:22:26 +00:00
Yoshihiro Takahashi
9260abade3 MFi386: r241785
boot: use -march=i386 for both i386 and amd64 builds
2012-11-10 11:55:52 +00:00
Roman Divacky
8252626fb4 Initialize hdrlen to 0 to avoid clang warning in NOINET case. 2012-11-10 10:41:00 +00:00
Kevin Lo
9fc1923565 Fix the build. 2012-11-10 08:34:40 +00:00
Alexander Motin
2c27cb3a34 Several optimizations to sched_idletd():
- Do not try to steal load from other CPUs if there was no contest switches
on this CPU (i.e. it was idle all the time and woke up just for bus mastering
or TLB shutdown). If current CPU was idle, then it is quite unlikely that some
other CPU has load to steal.  Under high I/O rate, when TLB shutdowns cause
numerous CPU wakeups, on 24-CPU system load stealing code may consume up to
25% of all CPU time without giving any benefits.
 - Change code that implements spinning for load to restart spin in case of
context switch.  Previous code periodically called cpu_idle() even under
high interrupt/context switch rate.
 - Rise spinning threshold to 10KHz, where it gives at least some effect
that may worth consumed power.

Reviewed by:	jeff@
2012-11-10 07:02:57 +00:00
Alfred Perlstein
79f62ed690 Allow maxusers to scale on machines with large address space.
Some hooks are added to clamp down maxusers and nmbclusters for
small address space systems.

VM_MAX_AUTOTUNE_MAXUSERS - the max maxusers that will be autotuned based on
physical memory.
VM_MAX_AUTOTUNE_NMBCLUSTERS - max nmbclusters based on physical memory.

These are set to the old values on i386 to preserve the clamping that was
being done to all arches.

Another macro VM_AUTOTUNE_NMBCLUSTERS is provided to allow an override
for the calculation on a MD basis.  Currently no arch defines this.

Reviewed by: peter
MFC after: 2 weeks
2012-11-10 02:08:40 +00:00
Xin LI
a9b09a3f3c MFV r242729 (mm):
Illumos r13840:97fd5cdf328a:

3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()

Illumos r13849:3468a95b27cd:

3258 ztest's use of file descriptors is unstable
2012-11-10 01:52:52 +00:00
Xin LI
8a28f3228f Attempt toward a buildable universe by silenting a few warnings for OFED. 2012-11-10 00:32:47 +00:00
Xin LI
5e2b8fb7ed Use %s when calling make_dev with a string pointer. This makes
clang happy.

MFC after:	2 weeks
2012-11-09 21:41:07 +00:00
Alexander V. Chernikov
73332e7c82 Simplify sending keepalives.
Prepare ipfw_tick() to be used by other consumers.

Reviewed by:	ae(basically)
MFC after:	2 weeks
2012-11-09 18:23:38 +00:00
Attilio Rao
bc2258da88 Complete MPSAFE VFS interface and remove MNTK_MPSAFE flag.
Porters should refer to __FreeBSD_version 1000021 for this change as
it may have happened at the same timeframe.
2012-11-09 18:02:25 +00:00
Roman Divacky
372c8c7e5d Dont compile some files in drm with -finline-limit=1350. GCC 4.2.1 doesnt
need that and clang does not support that. This effectively reverts r126542.
2012-11-09 17:46:07 +00:00
Hans Petter Selasky
e71628651b Fix LOW and FULL speed USB INTERRUPT endpoint support for the
DWC OTG driver. Fix a hang issue when using LOW and FULL speed
BULK traffic. Make sure we don't ask for data in the last
microframe. This allows using devices like USB mice and USB
keyboards connected to the RPI-B.

Suggested by:	gonzo @
2012-11-09 16:28:58 +00:00
Konstantin Belousov
5a17538e22 Do not try to enable new features in the %cr4 if running under
hypervisor.  Apparently, hypervisors failed to filter out 'Standard
Extended Features' report from CPUID, but deliver #gp when
corresponding bit in %cr4 is toggled.

This shall be reconsidered later, after hypervisors correct the bug.

Reported and tested by:	joel
Reviewed by:	avg
MFC after:	2 weeks
2012-11-09 16:00:30 +00:00
Roman Divacky
28f48eee07 Give tw_osl_dbg_printf format string to pacify clang warning. 2012-11-09 15:29:52 +00:00
Roman Divacky
46c7655029 Give device_printf format string to pacify clang warning. 2012-11-09 14:58:26 +00:00
Roman Divacky
b093ae5964 Cast VIA_READ to (void) where the result is unused. 2012-11-09 14:46:23 +00:00
Roman Divacky
73a19e6564 Remove unused static mn_timeout. 2012-11-09 14:14:51 +00:00
Roman Divacky
36e335c161 Give panic format string to pacify clang warning. 2012-11-09 13:58:52 +00:00
Jeff Roberson
53cc0bebb9 - Correct rev 242734, segments can sometimes get stuck. Be a bit more
defensive with segment state.

Reported by:	 b. f. <bf1783@googlemail.com>
2012-11-09 04:04:25 +00:00
Eitan Adler
5bcc8e2fbd Add support for Advantech PCI-1602 RS-485/RS-422 serial card
PR:		kern/169726
Submitted by:	Jan Mikkelsen <janm@transactionware.com>
Approved by:	cperciva (implicit)
MFC after:	5 days
2012-11-09 01:51:06 +00:00
Adrian Chadd
a64438faed Fix a very incorrect description. 2012-11-09 01:28:11 +00:00
Dimitry Andric
56eaeab499 Shrink boot2 by 8 bytes, by eliminating some unneeded instructions in
sio.S.  This is not particularly needed for head right now, but it is
intended to merge to stable/9, to fix boot2 build with clang there.

Reviewed by:	avg
MFC after:	3 days
2012-11-08 23:21:02 +00:00
Adrian Chadd
bbee93a84e Fix the build - fix up the ath_alq code to not compile by default. 2012-11-08 23:11:59 +00:00
Adrian Chadd
b69b0dcc24 Add some hooks into the driver to attach, detach and record EDMA descriptor
events.

This is primarily for the TX EDMA and TX EDMA completion. I haven't yet
tied it into the EDMA RX path or the legacy TX/RX path.

Things that I don't quite like:

* Make the pointer type 'void' in ath_softc and have if_ath_alq*()
  return a malloc'ed buffer.  That would remove the need to include
  if_ath_alq.h in if_athvar.h.
* The sysctl setup needs to be cleaned up.
2012-11-08 18:11:31 +00:00
Adrian Chadd
2a2441c9fa Add my initial cut at driver-layer ALQ support.
I'm using this to debug EDMA TX and RX descriptors and it's really helpful
to have a non-printf() way to decode frames.

I won't link this into the build until I've tidied it up a little more.

This will eventually be behind ATH_DEBUG_ALQ.
2012-11-08 18:07:29 +00:00
Adrian Chadd
174484b17a Oops, fix bogus spacing. 2012-11-08 17:46:27 +00:00
Adrian Chadd
ae3815fd18 Implement the ATH_RESET_NOLOSS path for TX stop and start; this is needed
for 802.11n TX device restarting.

Remove the debug printf()s; they're no longer needed here.
2012-11-08 17:43:58 +00:00
Adrian Chadd
d4c0d5d0d9 Convert this to a debug printf; it's working fine now. 2012-11-08 17:32:55 +00:00
Hans Petter Selasky
78abbdd54f Make the USB ethernet methods constant again in if_udav.c,
so that both adapter variants can be attached at the same
time.

MFC after:	0 days
2012-11-08 16:31:13 +00:00
Kevin Lo
b72d9fd455 Add new USB device ID. 2012-11-08 09:29:05 +00:00
Marius Strobl
c882264c95 Make r242655 build on sparc64. While at it, make vm_{max,min}_kernel_address
vm_offset_t as they should be.
2012-11-08 08:10:32 +00:00
Warner Losh
86c3bcbb97 Reduce differences between these two initarms a bit more. 2012-11-08 04:02:36 +00:00
Bjoern A. Zeeb
ec89d0398b Cleanup some whitspace in this file to get it out of an upcoming patch.
MFC after:	10 days
2012-11-08 03:29:55 +00:00
Konstantin Belousov
e9f581ba31 Zero the newly allocated md(4) swap-backed page to prevent random
kernel memory leakage to userspace. For the typical use, when a
filesystem put on the md disk, the change only results in CPU and
memory bandwidth spent to zero the page, since filsystems make sure
that user never see unwritten content.  But if md disk is used as raw
device by userspace, the garbage is exposed.

Reported by:	Paul Schenkeveld <freebsd@psconsult.nl>
MFC after:	2 weeks
2012-11-08 03:17:41 +00:00
Justin Hibbits
1939b590de Add DTrace to 32-bit PowerPC GENERIC now.
MFC after:	1 month
2012-11-08 01:51:23 +00:00
Jeff Roberson
5e5c387373 - Change ULE to use dynamic slice sizes for the timeshare queue in order
to further reduce latency for threads in this queue.  This should help
   as threads transition from realtime to timeshare.  The latency is
   bound to a max of sched_slice until we have more than sched_slice / 6
   threads runnable.  Then the min slice is allotted to all threads and
   latency becomes (nthreads - 1) * min_slice.

Discussed with: mav
2012-11-08 01:46:47 +00:00
Jeff Roberson
40b43503c0 - Implement BIO_FLUSH support around journal entries. This will not 100%
solve power loss problems with dishonest write caches.  However, it
   should improve the situation and force a full fsck when it is unable
   to resolve with the journal.
 - Resolve a case where the journal could wrap in an unsafe way causing
   us to prematurely lose journal entries in very specific scenarios.

Discussed with:	mckusick
MFC after:	1 month
2012-11-08 01:41:04 +00:00
Kevin Lo
b4423a2444 Use .PATH instead of VPATH.
Reviewed by:	gnn,rwatson
2012-11-08 01:35:02 +00:00
Attilio Rao
d9454fab30 - Current caching mode is completely broken because it simply relies
on timing of the operations and not real lookup, bringing too many
  false positives. Remove the whole mechanism. If it needs to be
  implemented, next time it should really be done in the proper way.
- Fix VOP_GETATTR() in order to cope with userland bugs that would
  change the type of file and not panic. Instead it gets the entry as
  if it is not existing.

Reported and tested by:	flo
MFC after:	2 months
X-MFC:		241519, 242536,242616
2012-11-08 00:32:49 +00:00
Doug Ambrisko
59ddd3e9b6 Add support for SCSI pass through devices to be attached and
detached.

PR:		172864
Submitted by:	rstone@
2012-11-08 00:32:36 +00:00
Adrian Chadd
f8eb8ef711 Update AP96 to directly attach an arswitch. 2012-11-07 23:50:28 +00:00
Justin Hibbits
c757049235 Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue:  Some probes will display an error message along the
lines of:  "Invalid address (0)"

I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit.  I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded.  Volunteers are welcome.

MFC after:	1 month
2012-11-07 23:45:09 +00:00
Alexander Motin
715c4a72fa Use information about suported diagnostic pages to avoid reading optional
Element Descriptor page if it is not supported.  This removes one error
message from verbose logs during boot on systems with some enclosures.

Sponsored by:	iXsystems, Inc.
2012-11-07 23:12:53 +00:00
Alexander Motin
aaff3a7331 Announce diagnostic page 7 (Element Descriptor) support. 2012-11-07 22:53:46 +00:00
Aleksandr Rybalko
c11de6f059 Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards.
Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (menthor)
2012-11-07 22:46:30 +00:00
Dimitry Andric
5387021768 For kernel builds with PROFLEVEL >= 2, such as LINT, don't attempt to
use the -mprofiler-epilogue option if the compiler is clang, as the flag
is not supported.  While here, fix up the value indentations.

MFC after:	1 week
2012-11-07 22:45:34 +00:00
Aleksandr Rybalko
dc9c386cd0 Disable automatic attachment of arswitch. It can't be auto-detected (like PHYs
do) and cause a problems trying to attach another instance to child mdio.

Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (menthor)
2012-11-07 22:43:09 +00:00
Dimitry Andric
c859a75e85 For kernel builds with PROFLEVEL >= 1, such as LINT, don't attempt to
use the -falign-functions option if the compiler is clang, as the flag
is not supported.

MFC after:	1 week
2012-11-07 22:15:28 +00:00