Commit Graph

35 Commits

Author SHA1 Message Date
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Matt Jacob
59398f700e Remove CTS_SPI_FLAGS_TAG_ENB. Nobody is using it and at least one
author can't remember why it was there.

The CTS_SCSI_FLAGS_TAG_ENB remains in place, and makes sense, and is
checked all over the place.

The CTS_SPI_FLAGS_TAG_ENB was probably an attempt to distinguish
protocol and transport tag capabilities. At the very least this can
be confusing and prone to many bugs, so let's just assume that the
transport tag case just flows from the protocol (and vice versa)
for now.
2006-12-03 07:19:28 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Matt Jacob
c1c3139ed3 Add PIM_SEQSCAN for HBA misc flags and code that understands
what to do with it.

This forces us to scan targets sequentially, not in parallel.
The reason we might want to do this is that SPI negotiation
might not work right at the SIM level if we try to do it
in parallel. We *could* fix this for each SIM where this is
broken, but it's a lot harder to do that when we can simply
ask CAM to probe sequentially.

If PIM_SEQSCAN is not set (default), the original behaviour for
probing is unchanged.

LUN probing is still done in parallel for each target in either
case.

While we're at it, clean up some resource leakage for error
cases.

Reviewed by:	ken, scott, scsi@
MFC after:	1 week
2006-06-05 22:22:14 +00:00
Matt Jacob
21370dfcff Sorry- last delta was checked in by mistake. 2006-05-24 15:23:27 +00:00
Matt Jacob
a62525f3c8 Make physical buffers in cam_periph_mapmem owned by the kernel in case we
return to user space w/o waiting for I/O to complete.

I tried to get several folks who know this code better than me to review it
with no luck. I *do* know that w/o this code, using the SCSI target driver
panics in userret (if it doesn't panic in knote first).
2006-05-24 15:22:21 +00:00
Matt Jacob
c4270cb6d7 CAM_NEW_TRAN_CODE placeholders for SAS support.
Reviewed by:	nate, ken, justin
MFC after:	1 month
2006-01-20 19:21:38 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Scott Long
af693a70b1 Reformat the comments for cam_hdr so that they can be read. 2004-06-07 19:12:44 +00:00
Nate Lawson
1deac58179 Add a PATH_INQ flag, PIM_NO_6_BYTE, which indicates the SIM never wishes to
receive 6 byte commands.  Add a check for this flag to da(4) and cd(4) so
that they honor it.  This is a quick workaround for many devices (especially
USB) that require da(4) quirks to operate.  The more complete approach is
to finish the new transport code which will be aware of the SCSI version a
transport implements.

MFC after:	1 day
2003-07-28 06:15:59 +00:00
Nate Lawson
141bdcc15a Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

PR:
Submitted by:
Looked over by:	scottl
Approved by:
Obtained from:
MFC after:
2003-06-14 22:17:38 +00:00
Kenneth D. Merry
260cc4834d Add support to CAM for devices with more than 2^32 blocks. (2TB if you're
using 512 byte blocks).

cam_ccb.h:	Bump up volume_size and cylinders in ccb_calc_geometry to
		64 bits and 32 bits respectively, so we can hold larger
		device sizes.  cylinders would overflow at about 500GB.
		Bump CAM_VERSION for this change.  Note that this will
		require a recompile of all applications that talk to the
		pass(4) driver.

scsi_all.c:	Add descriptions for READ/WRITE(16), update READ/WRITE(12)
		descriptions, add descriptions for SERVICE ACTION IN/OUT.
		Add a new function, scsi_read_capacity_16(), that issues
		the read capacity service action.  (Necessary for arrays
		larger than 2^32 sectors.)  Update scsi_read_write() to use
		a 64 bit LBA and issue READ(16) or WRITE(16) if necessary.
		NOTE the API change.  This should be largely transparnet
		to most userland applications at compile time, but will
		break binary compatibility.  The CAM_VERSION bump, above,
		also serves the purpose of forcing a recompile for any
		applications that talk to CAM.

scsi_all.h:	Add 16 byte READ/WRITE structures, structures for 16 byte
		READ CAPACITY/SERVICE ACTION IN.  Add scsi_u64to8b() and
		scsi_8btou64.

scsi_da.c:	The da(4) driver probe now has two stages for devices
		larger than 2TB.  If a standard READ CAPACITY(10) returns
		0xffffffff, we issue the 16 byte version of read capacity
		to determine the true array capacity.  We also do the same
		thing in daopen() -- use the 16 byte read capacity if the
		device is large enough.

		The sysctl/loader code has also been updated to accept
		16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Matt Jacob
c1c84cd9c5 Add a transport settings variant for Fibre Channel. 2001-06-24 18:17:45 +00:00
Matt Jacob
fd13aa4745 first blush at some FC path inquiry settings 2001-06-04 18:08:30 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
Justin T. Gibbs
dd5bac9d0f cam_ccb.h:
Bring back the CAM_NEGOTIATE ccb flag.  This flag indicates
	that SPI transfer negotiation should occur concurrently with the
	execution of this CCB.  The flag is not yet used by the XPT but
	is required for proper support of multi-initiator configurations
	where topology scans cannot rely on a bus reset to invalidate
	prior negotiations.

cam_xpt.c:
	Don't allow DT transmission rates to be specified for devices
	that don't have the DT feature listed in their inquiry data.
2000-07-18 19:47:14 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Nick Hibma
0cdabce076 Various typo's.
One minor nit. The speed was displayed wrong when below 1Mb/s.
2000-03-15 21:55:48 +00:00
Matt Jacob
c7abe45ece Because we added 4 bytes to the inquiry data size, we need to
rev the CAM revision too. Tsk.
Submitted by:	ken@freebsd.org
2000-01-25 21:24:52 +00:00
Matt Jacob
826eb7c840 Shift bits for CAM flags so that the top bit isn't set in an enum
(at request of Ken Merry). Garbage collect items out of the ccb_getdev
structure and and a length field so that consumes will know how much
of the inq_data tag is valid. Clean up a few misspellings. Add
a CAM_SEND_STATUS target mode flag.

All of this necessitated a CAM_VERSION bump.

JHK approved.

Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:15:35 +00:00
Matt Jacob
2759b3c7c4 Widen width of tag && initiator ids to u_int
(from u_int8_t) in ccb_accept_tio structure. This
matches usage elsewhere and also allows me to
overload the tag id with the RX_ID for fibre
channel target mode.
Reviewed by:	gibbs@freebsd.org
2000-01-03 08:54:51 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
Kenneth D. Merry
273a1a3da7 Get rid of some trailing commas in enumerated types that cause gcc to
complain when some warnings are turned on.

Requested by:	Bertrand Petit <elrond@phoe.frmug.org>
1999-11-17 05:06:52 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
e414ac576f Bump CAM version number. 1999-08-16 23:18:24 +00:00
Justin T. Gibbs
bf8bb7acc0 Add another command characteristic flag for commands that are queued
on physical devices as oposed to just in the XPT.  This is used to
mark XPT_SCSI_IO, XPT_RESET_DEV, XPT_ENG_EXEC, XPT_TARGET_IO, and
XPT_CONT_TARGET_IO function codes.

Change tag_id and init_id to be u_int from u_int8_t.  Some topologies
supported by CAM support much larger ID and tag ID address spaces
than parallel SCSI.

Kill some unused fields in the IMMED_NOTIFY ccb type.
1999-08-16 22:14:47 +00:00
Justin T. Gibbs
8281556234 Rely on the statistics in XPT_GDEV_STATS instead of the versions still
retained in XPT_GDEV_TYPE for binary compatibility.  Mark the legacy
structure values for removal when we bump the major CAM revision.
1999-05-23 18:57:29 +00:00
Justin T. Gibbs
87cfaf0e1f Add the XPT_PATH_STATS and XPT_GDEV_STATS function codes. These ccb
types allow the reporting of error counts and other statistics.  Currently
we provide information on the last BDR or bus reset as well as active
transaction inforamtion, but this will be expanded as more information is
added to aid in error recovery.

Use the 'last reset' information to better handle bus settle delays.
Peripheral drivers now control whether a bus settle delay occurs and
for how long.  This allows target mode peripheral drivers to avoid
having their device queue frozen by the XPT for what shoudl only be
initiator type behavior.

Don't perform a bus reset if the target device is incapable of performing
transfer negotiation (e.g. Fiber Channel).

If we don't perform a bus reset but the controller is capable of transfer
negotiations, force negotiations on the first transaction to go to the
device.  This ensures that we aren't tripped up by a left over negotiation
from the prom, BIOS, loader, etc.

Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

Allow mapping of XPT_CONT_TARGET_IO ccbs from userland.  They are
itentical to XPT_SCSI_IO ccbs as far as data mapping is concerned.
1999-05-22 21:58:47 +00:00
Kenneth D. Merry
9deea8574e Add a number of interrelated CAM feature enhancements and bug fixes.
NOTE:  These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface.  A make world is recommended.

camcontrol.[c8]:
 - We now support two new commands, "tags" and "negotiate".

	- The tags commands allows users to view the number of tagged
	  openings for a device as well as a number of other related
	  parameters, and it allows users to set tagged openings for
	  a device.

	- The negotiate command allows users to enable and disable
	  disconnection and tagged queueing, set sync rates, offsets
	  and bus width.  Note that not all of those features are
	  available for all controllers.  Only the adv, ahc, and ncr
	  drivers fully support all of the features at this point.
	  Some cards do not allow the setting of sync rates, offsets and
	  the like, and some of the drivers don't have any facilities to
	  do so.  Some drivers, like the adw driver, only support enabling
	  or disabling sync negotiation, but do not support setting sync
	  rates.

 - new description in the camcontrol man page of how to format a disk
 - cleanup of the camcontrol inquiry command
 - add support in the 'devlist' command for skipping unconfigured devices if
   -v was not specified on the command line.
 - make use of the new base_transfer_speed in the path inquiry CCB.
 - fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

 - new flags on many CCB function codes to designate whether they're
   non-immediate, use a user-supplied CCB, and can only be passed from
   userland programs via the xpt device.  Use these flags in the transport
   layer and pass driver to categorize CCBs.

 - new flag in the transport layer device matching code for device nodes
   that indicates whether a device is unconfigured

 - bump the CAM version from 0x10 to 0x11

 - Change the CAM ioctls to use the version as their group code, so we can
   force users to recompile code even when the CCB size doesn't change.

 - add + fill in a new value in the path inquiry CCB, base_transfer_speed.
   Remove a corresponding field from the cam_sim structure, and add code to
   every SIM to set this field to the proper value.

 - Fix the set transfer settings code in the transport layer.

scsi_cd.c:

 - make some variables volatile instead of just casting them in various
   places
 - fix a race condition in the changer code
 - attach unless we get a "logical unit not supported" error.  This should
   fix all of the cases where people have devices that return weird errors
   when they don't have media in the drive.

scsi_da.c:

 - attach unless we get a "logical unit not supported" error

scsi_pass.c:

 - for immediate CCBs, just malloc a CCB to send the user request in.  This
   gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

 - change the CAM ioctls to use the CAM version as their group code.

adv driver:

 - Allow changing the sync rate and offset separately.

adw driver

 - Allow changing the sync rate and offset separately.

aha driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

 - Allow setting offset and sync rate separately

bt driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

 - Fix the ultra/ultra 2 negotiation bug
 - allow setting both the sync rate and offset separately

Other HBA drivers:
 - Put code in to set the base_transfer_speed field for
   XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by:	gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
Justin T. Gibbs
a89bb8b406 Add constants and macros for dealing with XPT opcode group types. 1999-03-05 23:13:20 +00:00
Justin T. Gibbs
9819265820 Expand the hba_misc fied in the Path Inquiry ccb to allow a controller driver
to specify that it does not provide initiator services (PIM_NOINITIATOR)
and that the initial bus reset for device probing should be avoided
(PIM_NOBUSRESET).

Modify the XPT layer to honor these flags.
1998-12-10 04:05:49 +00:00
Justin T. Gibbs
bb1f2fe47f Add a mechanism to send a non-tagged transaction even if a device is
currently operating in a tagged mode.  The SIM driver should determine
if a device is in tag mode by looking at the CAM_TAG_ACTION_VALID flag
in the ccb header.  If the flag is set, the tag_action field is either
a SCSI II tag message (simple, ordered, head) or CAM_TAG_ACTION_NONE
to specify that no tagging should be performed.
1998-10-15 23:17:35 +00:00
Justin T. Gibbs
8b8a9b1d3e CAM Transport Layer (XPT).
Submitted by:	The CAM Team
1998-09-15 06:33:23 +00:00