Commit Graph

379 Commits

Author SHA1 Message Date
David E. O'Brien
8fc9820d7a Amd now mounts to "/.amd_mnt" rather than "/net". "/net/<host>" now works
in addition to "/host/<host>".  This make us consistant with Sun (as we
already were with SGI).
1999-06-28 04:09:14 +00:00
Justin M. Seger
c7880f911b Standardize appearance of subsection headers (two spaces for section name) 1999-06-27 22:12:35 +00:00
Sheldon Hearn
54f5ebed00 Add command-line option (-w), specified once to enable wrapping and
twice to enable wrapping for internal wrapping as well. If the option is
not specified wrapping is turned off so that inetd will behave exactly
as it used to before TCP Wrappers was imported.

Change etc/defaults/rc.conf so as to encourage wrapping on new systems.

Clarify the use of TCP Wrappers in the IMPLEMENTATION NOTES of the
manual page.

Approved by:	jkh
1999-06-27 18:05:34 +00:00
Mark Murray
cb0a438aa8 More PAO-ish stuff. Wildcard the IRQ bits. 1999-06-17 21:39:57 +00:00
Poul-Henning Kamp
2c7b227278 Add handle to control global TCP keepalives and turn them on as
default.

Despite their name it doesn't keep TCP sessions alive, it kills
them if the other end has gone AWOL.  This happens a lot with
clients which use NAT, dynamic IP assignment or which has a 2^32
* 10^-3 seconds upper bound on their uptime.

There is no detectable increase in network trafic because of this:
two minimal TCP packets every two hours for a live TCP connection.

Many servers already enable keepalives themselves.

The host requirements RFC is 10 years old, and doesn't know about
the loosing clients of todays InterNet.
1999-06-05 05:45:57 +00:00
Bill Fumerola
b10573bf3a sunsite is now metalab. 1999-06-04 03:17:04 +00:00
Bill Fumerola
03a6bd91f3 'make update' in the ports directory. 1999-06-01 02:55:44 +00:00
David E. O'Brien
c2fc637349 Get case right in "COMPAT3X".
Submitted by:	Kevin Street <street@iname.com>
1999-05-23 17:57:23 +00:00
David E. O'Brien
85ec0e9444 Add a commented out COMPAT22 and COMPAT3x, since we have the others. 1999-05-19 02:05:50 +00:00
Poul-Henning Kamp
f840bacd9a Change tcp_extension comment.
Submitted by:	Studded <Studded@gorean.org>
Reviewed by:	phk
1999-05-16 09:19:44 +00:00
David E. O'Brien
b6c29b4c5c Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison).
Add additional entries (might need a little tweaking) for the Xircom adapters.

Xircom entries obtained from:  http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
Bill Paul
31a08ab08e Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Brian Somers
282302a153 Add AmbiCom Inc NIC
Submitted by: Wes Peters <wes@softweyr.com>
1999-05-04 08:39:11 +00:00
Brian Somers
3307604ff5 Add 3Com/Noteworthy 56k modem
PR:	      9187
Submitted by: Craig Leres <leres@ee.lbl.gov>
Requested by: Nathan Ahlstrom <nrahlstr@winternet.com>
1999-05-03 19:08:43 +00:00
David E. O'Brien
4e9dcab844 Remove NOPERL. Seems to cause too many problems, as those that try don't
understand the implications and don't think to undo it when they get experience
trouble.  (wonder about some of the people running -CURRENT sometimes)
1999-05-02 00:18:02 +00:00
Brian Somers
70035dcff6 Add an entry for the Xircom GlobalACCESS modem
PR:		10277
Submitted by:	Nathan Ahlstrom <nrahlstr@winternet.com>
1999-04-25 10:27:22 +00:00
Dag-Erling Smørgrav
3e297f8d95 Allow the user to specify a different firewall script than /etc/rc.firewall. 1999-04-10 10:56:58 +00:00
Greg Lehey
6f16baa899 Add variable start_vinum. If set to YES, it will start vinum and
automagically find all the partitions.  This is to be preferred to the
somewhat emetic usage of vinum_slices and the equally obnoxious 'vinum
read' command.
1999-04-02 07:15:44 +00:00
Warner Losh
a780977066 Add two features:
log_in_vain:
	log_in_vain turns on logging for packets to ports for which
	there is no listener.
    rc.sysctl:
	A generic way to set sysctl values.  It reads /etc/syslog.conf
	and sets values based on that.  No /etc/syslog.conf has been
	checked in yet, and I've not added this to the makefile yet
	until I get more feedback.

Reviewed by: -current, -hackers and bde especially
1999-03-28 20:36:03 +00:00
Chris Timmons
a12e6f2ec5 Replace a missing quote in the config for 3Com/USR/MegaHertz 3CCM156 1999-03-25 16:37:33 +00:00
Brian Somers
72a042f2bf Add natd_program and change a comment. 1999-03-24 10:27:46 +00:00
Bill Fumerola
61bf4caf49 Split check_quotas into check_quotas and enable_quotas
enable_quotas - use quotas on your system
check_quotas - check for violations on startup

By assuming that a system was neat and without violation before it booted
we can skip a long (and at that point needless) process.

Submitted by:	Alex Perel <veers@disturbed.net>
1999-03-17 04:00:04 +00:00
Mark Murray
5beaada399 Bitrot. Remove objlink as it is not pleasant to be downwind.
PR:		8071
Reviewed by:	Sheldon Hearn <sheldonh@iafrica.com>
1999-03-14 20:41:14 +00:00
Bill Fumerola
cf49fe2f70 Bring in some MASTER_SITE_{AFTERSTEP,WINDOWMAKER} from bsd.port.mk 1999-03-14 19:05:16 +00:00
James FitzGibbon
1dd418124c Add ${lpd_program} and ${portmap_program} as variables in rc.conf, with
suitable defaults pointing to the FreeBSD-shipped versions.  This will allow
for easier integration of third-party replacements for these daemons.
Reviewed by: Several members of -committers
1999-03-11 16:17:24 +00:00
Poul-Henning Kamp
df1fd5ada5 Change the comment to sendmail_flags which has scared so many people
from removing -bd to something more sensible.
1999-03-03 15:04:33 +00:00
Mike Smith
14418f224a Add entry for Motorola Montana modem.
Submitted by:	Andre LeClaire <leclaire@sprintmail.com>
1999-02-25 23:33:51 +00:00
Brian Somers
3854f9f544 Add IC-CARD Ethernet card & AT&T V34+ Fax Modem
Submitted by:	Maxim Sobolev <sobomax@altavista.net>
1999-02-22 14:08:44 +00:00
Brian Somers
f4373d473b Xircom Ethernet+Modem 10/100+ 1999-02-22 14:03:31 +00:00
Steve Price
fbd2d9c138 Add entries for the following cards:
Viking V.90/K56Flex modem
	Zoom 56K modem
	3CCE589E* network card
	3CCM156 modem

Latter submitted by:	Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
Mike Smith
5966e39935 Add entry for D-Link DE-660
Submitted by:	Brian Handy <handy@lambic.physics.montana.edu>
1999-02-19 07:20:55 +00:00
Jordan K. Hubbard
d105b00084 Move rc.conf into defaults/ directory. This is part of a larger series
of commits to deal with the rc.conf.site confusion.
1999-02-09 22:15:18 +00:00
Mark Murray
ba529ee910 Add bits useful to getting laptops going (my Libretto in particular)
Add ActionTec v.90 modem and Libretto Floppy to pccard database;
Autoload pcic device.
1999-02-04 10:06:44 +00:00
Satoshi Asami
3e52a8e840 Remove commented out definition of FTP_PASSIVE_MODE, it is (and has always
been) an environment variable and doesn't belong here.

Pointed out by:	cnh@ems.mindspring.net, sanpei@yy.cs.keio.ac.jp
1999-02-03 22:25:41 +00:00
Satoshi Asami
f7124908f3 Change MASTER_SITE_BACKUP to point to new dir on wcarchive. Merge some
MASTER_SITE_* macros from latest bsd.port.mk.
1999-01-20 01:58:39 +00:00
Peter Wemm
50f7128ec3 Remove the example for setting KERNFORMAT=elf; it is the default already. 1999-01-11 15:06:57 +00:00
David E. O'Brien
cc38765f63 make comments more consistant 1999-01-06 02:44:29 +00:00
Mike Smith
a66325ee96 Add another modem (Psion Dacom)
Submitted by:	"Gary Palmer" <gpalmer@FreeBSD.ORG>
1998-12-15 02:57:30 +00:00
Peter Wemm
537aa6857b Commented out example of changing the default kernel format with warning. 1998-10-16 03:26:54 +00:00
Brian Somers
04c6e85b06 Add an entry for the HAYES OPTIMA 28.8k 1998-09-25 22:08:53 +00:00
Mike Smith
7f4fca29df Add Compex Net-A and 3Com/USR/Megahertz 3CM556
Submitted by:	Willem Jan  Withagen <wjw@surf.IAE.nl> and Brian Handy <handy@lambic.physics.montana.edu>
1998-09-12 18:53:49 +00:00
Mike Smith
c6446f7ff9 Add the Fujitsu MBH10303
Submitted by:	David Kulp <dkulp@neomorphic.com>
1998-09-11 18:35:57 +00:00
Matthew Dillon
2cba5c787c make.conf.local test/include removed from make.conf, to be put in sys.mk
instead.
1998-08-29 01:24:21 +00:00
Matthew Dillon
4988888156 Reviewed by: asami@freebsd.org (Satoshi Asami)
Give make.conf a make.conf.local capability similar to rc.conf's
    rc.conf.local capability.  Eases large-site administration.
1998-08-26 21:20:47 +00:00
Dima Ruban
ed55190d40 Introduce KRB5_HOME variable. 1998-08-01 19:55:32 +00:00
Jordan K. Hubbard
f1273de057 MF22: die sup die. 1998-06-26 01:44:57 +00:00
Nate Williams
6ab2c9633b Updated entry for Xircom CreditCard Modem
Submitted by:	"Mike Del" <repenting@hotmail.com>
1998-06-15 17:51:03 +00:00
Nate Williams
2f52e46135 - Added entry for Xircon CreditCard Modem.
Submitted by:	 "Mike Del" <repenting@hotmail.com>
1998-06-08 21:10:41 +00:00
Jordan K. Hubbard
4b33025b1b Back out locale change until it's better understood by all just
what it is we're trying to do here. :)
OK'd by:	asami
1998-05-20 22:24:48 +00:00
Peter Hawkins
802d2d4af0 PR: misc/6031
Patch applied as per PR - enables preferential fetch from local mirrors
1998-05-19 13:02:04 +00:00
Poul-Henning Kamp
e1c08ba3fa Add a crucial missing _ in NO_SENDMAIL
PR:		6545
Reviewed by:	phk
Submitted by:	Jos Backus <jbackus@plex.nl>
1998-05-08 20:15:39 +00:00
Andrey A. Chernov
b7574f89a4 Add commented out common INSTALL and FORCE_PKG_REGISTER knobs 1998-04-16 08:21:24 +00:00
Andrey A. Chernov
07b31e7d58 Add missing commented out MOTIF_STATIC example 1998-04-16 08:01:27 +00:00
Poul-Henning Kamp
5a85f025f8 In light of the fact that several widespread sendmail alternatives exists
is reason enough to make the compilation & installation of sendmail an
make.conf option.  I know that you hate negative options Bruce.

PR:		6284
Reviewed by:	phk
Submitted by:	Adrian Colley <aecolley@world.std.com>
1998-04-15 16:37:42 +00:00
Dima Ruban
0fcadac763 Don't build sperl if you don't want to. 1998-03-26 06:06:22 +00:00
Tatsumi Hosokawa
d767c61bfd Added U.S. Robotics XJ1560J (X2 X-jack modem) 1998-03-19 16:25:17 +00:00
Jordan K. Hubbard
77636759a3 style tweak. 1998-03-18 08:00:25 +00:00
Jordan K. Hubbard
9a4d88e55e Document NOPERL 1998-03-18 07:58:49 +00:00
Bill Fenner
6570d2f3ad Convert ${MASTER_SITE_SUBDIR} to %SUBDIR% as in bsd.port.mk rev 1.257 1998-02-27 18:34:56 +00:00
Satoshi Asami
a7b8695b78 Fix path in commented-out sample of MASTER_SITE_TEX_CTAN.
PR:		5861
Submitted by:	kuriyama@opt.phys.waseda.ac.jp
1998-02-27 15:45:34 +00:00
Jun-ichiro itojun Hagino
1b2ea87383 added "Telecom Device SuperSocket RE450T" (PCMCIA NE2000 variant). 1998-02-24 13:56:38 +00:00
Tatsumi Hosokawa
8b2db71cdf Added NTT ThunderCard Modem... (because I'm using it :-)) 1998-02-24 13:32:36 +00:00
Tatsumi Hosokawa
3ce47957e0 commented out REX-5535 because -current does not have spc driver. 1998-02-24 13:26:57 +00:00
Mike Smith
d3282c9763 Add entry for Eiger 33.6K modem
Submitted by:	John Goerzen <jgoerzen@alexanderwohl.complete.org>
1998-02-10 01:01:35 +00:00
Paul Traina
3accbba09b Add support for explicit 3C589D varients and XJ1336 modems 1997-12-16 02:43:26 +00:00
Nate Williams
d379cdf006 - Added entry for 'Linksys Combo PCMCIA EthernetCard'
Submitted by:	Brad Karp <karp@eecs.harvard.edu>
1997-12-07 05:20:56 +00:00
Nate Williams
fc018b804b - Added entries for LinkSys ethernet card and Apex Data Modem.
Submitted by:	Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
Nate Williams
5547669065 - Added entry for Accton 2216 ethernet card.
Submitted by:	 Patrick Gardella <patrick@cre8tivegroup.com>
1997-11-14 18:48:59 +00:00
Nate Williams
d507cb92a3 - Commented out some PAO specific portions of this file.
Noticed by:	Michael Reifenberger <root@totum.plaut.de>
1997-10-30 01:17:01 +00:00
Mike Smith
5dff319cc7 Add entries for the Danpex EN-6200P2 and Megahertz XJ4336 1997-10-23 14:00:40 +00:00
Nate Williams
fd5f040f7a - Update the Adaptect SlimSCSI CIS tuple so that it works with FreeBSD's
default pccard daemon.
1997-10-21 18:07:36 +00:00
Jordan K. Hubbard
480bf84775 Back out my last commit - the trailing / should stay and fetch(1) should
stop puking on null directory components.
1997-10-08 12:07:09 +00:00
Jordan K. Hubbard
59daeba4f1 Remove trailing slash from MASTER_SITE_BACKUP example since it
can lead to two trailing /'s, which is in turn an invalid URL (just
bit me :-).
1997-10-08 10:56:27 +00:00
Jordan K. Hubbard
6b60b66862 Document the ever decreasingly popular USA_RESIDENT variable. 1997-09-28 22:11:21 +00:00
Mark Murray
73357bc9b4 Final commit for KTH KerberosIV.
-DMAKE_EBONES -> -DMAKE_KERBEROS4
1997-09-28 09:29:11 +00:00
Jordan K. Hubbard
da11a1b3b3 By popular request, change the default suggested value for CFLAGS
and also note that COPTFLAGS is _just_ for the kernel and CFLAGS just
for userland.
1997-09-10 13:35:33 +00:00
Bruce Evans
fa03459efb Updated serial console options. 1997-06-09 05:38:41 +00:00
Andreas Klemm
1a827e9f69 synchronize with bsd.doc.mk (long outstanding fix)
PR:		closes docs/3479
1997-05-03 19:58:39 +00:00
Satoshi Asami
a9ad17bc71 Add comments about overridable MASTER_SITE_* variables.
Suggested by: Narvi <narvi@haldjas.folklore.ee>
1997-04-15 08:16:44 +00:00
Marc G. Fournier
42c13e4555 Remove MAKEFLAGS example from /etc/make.conf...
Bruce points out that it breaks things if someone doesn't do a 'make depend',
but I just found out that it breaks 'make depend' itself :(
1997-03-31 05:26:39 +00:00
Marc G. Fournier
30d23e30a7 Add/document MAKEFLAGS into /etc/make.conf, using -j3 as example 1997-03-30 23:43:41 +00:00
Joerg Wunsch
3a0d8e274e top(1) has a tunable parameter for the hash size to hash the user
entries.  Mention it in make.conf.
1997-03-25 00:04:33 +00:00
Peter Wemm
79403fe300 Revert $FreeBSD$ to $Id$ 1997-02-23 09:21:14 +00:00
Bruce Evans
dab159e3d6 Select between the generic math functions and the i387-specific ones
at runtime.

etc/make.conf:
Nuked HAVE_FPU option.

lib/msun/Makefile:
Always build the i387 objects.  Copy the i387 source files at build
time so that the i387 objects have different names.  This is simpler
than renaming the files in the cvs repository or repeating half of
bsd.lib.mk to add explicit rules.

lib/msun/src/*.c:
Renamed all functions that have an i387-specific version by adding
`__generic_' to their names.

lib/msun/src/get_hw_float.c:
New file for getting machdep.hw_float from the kernel.

sys/i386/include/asmacros.h:
Abuse the ENTRY() macro to generate jump vectors and associated code.
This works much like PIC PLT dynamic initialization.  The PIC case is
messy.  The old i387 entry points are renamed.  Renaming is easier
here because the names are given by macro expansions.
1997-02-16 18:26:31 +00:00
Jordan K. Hubbard
2ff95d56b3 Document FTP_PASSIVE_MODE in the place where I usually set it. 1997-02-13 09:07:32 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Peter Wemm
747328f032 Add commented out samples on how to activate the compat libs during build.
Note that nothing is stopping somebody from cd'ing to src/lib/compat/<dist>
and doing a 'make all install' there by hand.
1996-12-23 05:17:09 +00:00
Andrey A. Chernov
7deead3e52 cvsup client moved from sbin to bin
2.2 candidate
1996-12-16 03:37:59 +00:00
Andrey A. Chernov
7fded3d0e5 Add -z to CVSupflags, it iz safe because it is done by zlib,
not by extra gzip child
1996-11-01 17:12:07 +00:00
Paul Traina
c27ebf26ac catch a mismatch after final review... 1996-10-14 17:27:53 +00:00
Paul Traina
972a3f282a Expose the control mechanism for serial console boot so that the default
shipped with freebsd can be changed without modifying the Makefiles directly.

Creates:	BOOT_FORCE_COMCONSOLE
		BOOT_PROBE_KEYBOARD
		BOOT_PROBE_KEYBOARD_LOCK
		BOOT_COMCONSOLE			(port value for console)
1996-10-14 17:25:53 +00:00
Andrey A. Chernov
c849957cb0 Use full path for cvsup 1996-10-05 19:41:31 +00:00
Andrey A. Chernov
e110018119 Add CVSup block (commented out) 1996-10-05 18:51:45 +00:00
Peter Wemm
b99929ea6b Remove SHARED_LIBCC_INT sample, it's gone and has been a do-nothing option
since the cc1/cc1plus backends were linked static some time ago.
1996-09-21 14:30:23 +00:00
Nate Williams
4012436276 Add the (commented out) OBJLINK hook. 1996-06-24 16:50:39 +00:00
Nate Williams
3e4742ef6a Remove the hardcoding of the IRQ, and instead have it determine a free
IRQ.

For now only enable on the 3C589 until other cards have been tested.
1996-06-19 01:28:07 +00:00
Nate Williams
ee42451e19 Change the 'nep0' lines to 'ep0' since we are very soon to get a working
if_ep.c driver for PCCARD stuff.  Also,change the 3C589 examples to
reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
Satoshi Asami
5e29e1ca51 Take out quotes around MOTIFLIB. Clarify comments a bit, most users
don't have to touch neither X11BASE nor MOTIFLIB.

Reported by:	kmitch@phantasma.bevc.blacksburg.va.us
1996-04-21 08:56:32 +00:00
Andrey A. Chernov
db3a276987 Back out my MOTIF_STATIC change, it is unnecessary 1996-04-16 11:47:29 +00:00
Andrey A. Chernov
74bf61cc44 Document MOTIF_STATIC 1996-04-13 06:40:19 +00:00
Satoshi Asami
cf59981cf4 Add commented-out definitions of HAVE_MOTIF and MOTIFLIB. 1996-04-12 09:28:14 +00:00
Nate Williams
7c88555add Synchronize relevant changes from the most recent PC-CARD release. 1996-03-18 20:15:24 +00:00
Nate Williams
5d9d7f34a7 PC-CARD hooks. Someday it will actually enable working code. :)
Reviewed by:	phk
Submitted by:	Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads

I re-wrote alot of this, but the ideas are based on the code from the
most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Satoshi Asami
e964528dea Add NOPORTDOCS, similar to NOMANCOMPRESS. It prohibits additional
port documentation (which can be things like postscript manuals
describing every single of the 65,536 options) from being installed
into ${PREFIX}/share/doc.
1996-03-06 09:10:23 +00:00
Adam David
6f3ce68f18 improve the comment for BOOTWAIT 1996-02-15 21:14:36 +00:00
Andrey A. Chernov
92f710b2bc Remove -fno-strength-reduce, gcc bug fixed recently 1996-01-05 18:54:07 +00:00
Andrey A. Chernov
d54d4366c8 Refle 1995-09-30 17:20:27 +00:00
Andrey A. Chernov
1012b636c9 Change SUPFILEx order, secure first, ports second to make base system update first
All stuff commented out
1995-09-28 14:59:44 +00:00
Andrey A. Chernov
cf9b8ec06b Add -fno-strength-reduce to -O2 optimization, all stuff commented out 1995-09-15 01:05:41 +00:00
Andrey A. Chernov
b81f547e3a Add commented out entries for SUP update, 3 standard supfiles handled:
standard/ports/secure
1995-09-15 01:03:55 +00:00
Rodney W. Grimes
d0a25995fc [I cvs admin -o the last one of these you saw, it was commited on
the wrong branch :-(]

Eliminate incorrect double negative logic Bruce has been gripping
about for a year now.  Change = no_way to = true.

Submitted by: bde (sort of, patch by me :-))
1995-07-13 09:15:50 +00:00
Rodney W. Grimes
33d23de425 Remove CCFPU, it is no longer used any place in the source tree.
Submitted by:	Thomas Graichen <graichen@sirius.physik.fu-berlin.de>
1995-07-13 08:43:14 +00:00
Jordan K. Hubbard
a746536c51 Document COPTFLAGS in addition to CFLAGS. 1995-04-23 13:03:24 +00:00
Poul-Henning Kamp
6950e7e24e make.conf doesn't postulate anything about libm now. 1995-03-21 02:55:33 +00:00
Jordan K. Hubbard
39ad1abd89 Take out obsolete KERBEROS_IV build variable. Just eBones now.
Submitted by:	Mark Murray <mark@grondar.za>
1995-03-20 21:35:15 +00:00
Poul-Henning Kamp
9a4deb1b4a Now that the default for the shared gcc-internal lib changed, make this match. 1994-11-10 02:29:41 +00:00
Poul-Henning Kamp
957c663526 Update make.conf and sys.mk to reflect the most recent advances in
civilization:  Use -O2 and MSUN as default, and X11 is in /usr/X11R6
1994-11-07 04:18:04 +00:00
Geoff Rehmet
f03a2300b2 mention MAKE_EBONES and MAKE_KERBEROS 1994-09-30 14:57:01 +00:00
Rodney W. Grimes
2c5fdcb65e fbtab: Pulled down from Attic, fixed spaces to tabs.
make.conf: Pulled in the following changes that had been commited
to share/examples/etc:
----------------------------
revision 1.6
date: 1994/09/20 22:30:33;  author: adam;  state: Exp;  lines: +3 -3
BOOTWAIT example converted to milliseconds calibration
----------------------------
revision 1.4
date: 1994/09/19 21:35:28;  author: wollman;  state: Exp;  lines: +7 -1
Document NO_SHARED_LIBCC_INT.
----------------------------
revision 1.3
date: 1994/09/19 21:28:11;  author: wollman;  state: Exp;  lines: +12 -17
Install /etc from the same source as /usr/share/examples/etc (mostly).
----------------------------
revision 1.2
date: 1994/09/19 02:05:08;  author: ache;  state: Exp;  lines: +1 -11
Remove STARTUP_LOCALE, obsoleted now
----------------------------
revision 1.1
date: 1994/09/08 19:08:59;  author: jkh;  state: Exp;
Add a sample make.conf.  Also document the new X11BASE variable, and
expand some of the documentation for other entries.
Submitted by:   jkh
----------------------------

manpath.config: Pulled down from Attic, and merged share/examples/etc
changes.

rc: Pulled in the following change from share/examples/etc:
----------------------------
revision 1.2
date: 1994/09/19 23:13:37;  author: ache;  state: Exp;  lines: +1 -2
Remove warning about adjkerntz /var/run file
----------------------------
1994-09-23 07:16:13 +00:00
Adam David
6766ed571b More reasonable example of BOOTWAIT parameter
Added comment about multiplication factor
1994-09-19 20:10:10 +00:00
Andrey A. Chernov
89c8b5adfd Remove STARTUP_LOCALE reference, obsoleted 1994-09-19 02:02:55 +00:00
Andrey A. Chernov
2402b6287e Add commented out STARTUP_LOCALE with explanation 1994-06-16 17:13:53 +00:00
Adam David
33d04130bd Changed MDEC_OPT=BOOTWAIT= to BOOTWAIT= 1994-06-15 21:32:38 +00:00
Adam David
4a1bed6807 added comments for how to use CCFPU and MDEC_OPT 1994-06-15 20:24:16 +00:00
Andrey A. Chernov
c4a6b5c74b Remove CXXFLAGS from here, handled in another place 1994-06-14 11:46:52 +00:00
Andrey A. Chernov
476a220578 Add commented out PRINTER=ps entry for easy choose
system documentation format
1994-06-09 11:13:52 +00:00
Andrey A. Chernov
e6f5a68194 Add commented out CXXFLAGS entry similar to CFLAGS entry 1994-06-09 08:32:58 +00:00
Geoff Rehmet
624ca9967b Add mention of WANT_MSUN, HAVE_FPU and NOMANCOMPRESS
(NOMANCOMPRESS works together with the new bsd.man.mk to turn off
compression of manual pages - manual pages are installed compressed
by default now.)
1994-06-05 20:37:15 +00:00
Poul-Henning Kamp
da63052f1e added make.conf template, which does nothing. 1994-06-01 00:58:06 +00:00