On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
Rename functions and variables from ixlv to iavf to match the
user-facing name change. There shouldn't be any functional changes
with this change, but this may help with browsing the source code
and reducing diffs in the future.
Submitted by: kbowling@
Reviewed by: erj@, sbruno@
Approved by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D17544
Finishes the conversion of the 40Gb Intel Ethernet drivers to iflib(9) for
FreeBSD 12.0, and fixes numerous bugs in both ixl(4) and iavf(4).
This commit also re-adds the VF driver to GENERIC since it now compiles and
functions.
The VF driver name was changed from ixlv(4) to iavf(4) because the VF driver is
now intended to be used with future products, not just with Fortville/Fort Park
VFs.
A man page update that documents these drivers is forthcoming in a separate
commit.
Reviewed by: sbruno@, kbowling@
Tested by: jeffrey.e.pieper@intel.com
Approved by: re (gjb@)
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D16429
This appeared to be required to have EFI RT support and EFI RTC
enabled by default, because there are too many reports of faulting
calls on many different machines. The knob is added to leave the
exceptions unhandled to allow to debug the actual bugs.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
Ifuncs selectors dispatch copyin(9) family to the suitable variant, to
set rflags.AC around userspace access. Rflags.AC bit is cleared in
all kernel entry points unconditionally even on machines not
supporting SMAP.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13838
- inline atomics in modules on i386 and amd64 (they were always
inline on other arches)
- allow modules to opt in to inlining locks by specifying
MODULE_TIED=1 in the makefile
Reviewed by: kib
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16079
ixlvc.c is only used by the VF driver (ixlv), and that driver currently doesn't work.
It will be re-added once the VF driver is finished being ported to iflib.
Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.
The driver currently isn't completely ported; features that are missing:
- VF driver (ixlv)
- SR-IOV host support
- RDMA support
The plan is to have these re-added to the driver before the next FreeBSD release.
Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, krzysztof.galazka@intel.com
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577
file in /sys/conf, so was unavailable in configurations that don't use
modules, and was not testable or notable in NOTES. Its normal
configuration (not using a module) is still silently deprecated in
aout(4) by not mentioning it there.
Update i386 NOTES for COMPAT_AOUT. It is not i386-only, or even very MD.
Sort its entry better.
Finish gzip configuration (but not support) for amd64. gzip is really
gzipped aout. It is currently broken even for i386 (a call to vm fails).
amd64 has always attempted to configure and test it, but it depends on
COMPAT_AOUT (as noted). The bug that it depends on unconfigured files
was not detected since it is configured as a device. All other optional
image activators are configured properly using an option.
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
memmove is repurposed bcopy (arguments swapped, return value added)
The libkern variant is a wrapper around bcopy, so this is a big
improvement.
memset is repurposed memcpy. The librkern variant is doing fishy stuff,
including branching on 0 and calling bzero.
Both functions are rather crude and subject to partial depessimization.
This is a soft prerequisite to adding variants utilizing the
'Enhanced REP MOVSB/STOSB' bit and let the kernel patch at runtime.
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
- Microsemi SCSI driver for PQI controllers.
- Found on newer model HP servers.
- Restrict to AMD64 only as per developer request.
The driver provides support for the new generation of PQI controllers
from Microsemi. This driver is the first SCSI driver to implement the PQI
queuing model and it will replace the aacraid driver for Adaptec Series 9
controllers. HARDWARE Controllers supported by the driver include:
HPE Gen10 Smart Array Controller Family
OEM Controllers based on the Microsemi Chipset.
Submitted by: deepak.ukey@microsemi.com
Relnotes: yes
Sponsored by: Microsemi
Differential Revision: https://reviews.freebsd.org/D14514
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
Three copies of the linuxulator linux_sysvec.c contained identical
BSD to Linux errno translation tables, and future work to support other
architectures will also use the same table. Move the table to a common
file to be used by all. Make it 'const int' to place it in .rodata.
(Some existing Linux architectures use MD errno values, but x86 and Arm
share the generic set.)
This change should introduce no functional change; a followup will add
missing errno values.
MFC after: 3 weeks
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14665
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
net80211/ieee80211_ageq.c was present twice in sys/conf/files so leave the
correctly sorted one. dev/wpi/if_wpi.c was present in sys/conf/files as well
as sys/conf/files.amd64 and sys/conf/files.i386 so prefer the sys/conf/files
entry.
Reviewed by: allanjude, rstone
machine independent parts of the existing code to a new file that can be
shared between amd64 and arm64.
Reviewed by: kib (previous version), imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12434
Some x86 class CPUs have accelerated intrinsics for SHA1 and SHA256.
Provide this functionality on CPUs that support it.
This implements CRYPTO_SHA1, CRYPTO_SHA1_HMAC, and CRYPTO_SHA2_256_HMAC.
Correctness: The cryptotest.py suite in tests/sys/opencrypto has been
enhanced to verify SHA1 and SHA256 HMAC using standard NIST test vectors.
The test passes on this driver. Additionally, jhb's cryptocheck tool has
been used to compare various random inputs against OpenSSL. This test also
passes.
Rough performance averages on AMD Ryzen 1950X (4kB buffer):
aesni: SHA1: ~8300 Mb/s SHA256: ~8000 Mb/s
cryptosoft: ~1800 Mb/s SHA256: ~1800 Mb/s
So ~4.4-4.6x speedup depending on algorithm choice. This is consistent with
the results the Linux folks saw for 4kB buffers.
The driver borrows SHA update code from sys/crypto sha1 and sha256. The
intrinsic step function comes from Intel under a 3-clause BSDL.[0] The
intel_sha_extensions_sha<foo>_intrinsic.c files were renamed and lightly
modified (added const, resolved a warning or two; included the sha_sse
header to declare the functions).
[0]: https://software.intel.com/en-us/articles/intel-sha-extensions-implementations
Reviewed by: jhb
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12452
The sensor value is formatted similarly to previous models (same
bitfield sizes, same units), but must be read off of the internal
System Management Network (SMN) from the System Management Unit (SMU)
co-processor.
PR: 218264
Reported and tested by: Nils Beyer <nbe AT renzel.net>
Reviewed by: avg (no +1), mjoras, truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12217
AMD Family 17h CPUs have an internal network used to communicate between
the host CPU and the PSP and SMU coprocessors. It exposes a simple
32-bit register space.
Reviewed by: avg (no +1), mjoras, truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12217
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Introduce hw.nvme.use_nvd tunable. This tunable allows both nvd and
nda to be installed in the kernel, while allowing only one of them to
create devices. This is an all-or-nothing setting, and you can't
change it after boot-time. However, it will allow easier A/B testing.
Differential Revision: https://reviews.freebsd.org/D11825
This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.
Reviewed by: rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11573
-fPIC has no effect on linking although it seems to be ignored by
GNU ld.bfd. However, it causes ld.lld to terminate with an invalid
argument error.
This is equivalent to r296057 but for the kernel (not modules) case.
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
For GEN1 Hyper-V, vmbus is attached to pcib0, which contains the
resources for PCI passthrough and SR-IOV. There is no
acpi_syscontainer0 on GEN1 Hyper-V.
For GEN2 Hyper-V, vmbus is attached to acpi_syscontainer0, which
contains the resources for PCI passthrough and SR-IOV. There is
no pcib0 on GEN2 Hyper-V.
The ACPI VMBUS device now only holds its _CRS, which is empty as
of this commit; its existence is mainly for upward compatibility.
Device tree structure is suggested by jhb@.
Tested-by: dexuan@
Collabrated-wth: dexuan@
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10565
- Move all bitmap related functions from bitops.h to bitmap.h, similar
to what Linux does.
- Apply some minor code cleanup and simplifications to optimize the
generated code when using static inline functions.
- Implement the following list of bitmap functions which are needed by
drm-next and ibcore:
- bitmap_find_next_zero_area_off()
- bitmap_find_next_zero_area()
- bitmap_or()
- bitmap_and()
- bitmap_xor()
- Add missing include directives to the qlnxe driver
(davidcs@ has been notified)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Synthetic keyboard is the only supported keyboard on GEN2 Hyper-V.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10196
optimization.
This fixes building with gcc-4.2.1 (it doesn't support SSE4).
gas-2.17.50 [FreeBSD] supports SSE4 instructions, so this doesn't
need using .byte directives.
This fixes depending on host user headers in the kernel.
Fix user includes (don't depend on namespace pollution in <nmmintrin.h>
that is not included now).
The instrinsics had no advantages except to sometimes avoid compiler
pessimixations. clang understands them a bit better than inline asm,
and generates better looking code which also runs better for cem, but
for me it just at the same speed or slower by doing excessive
unrollowing in all the wrong places. gcc-4.2.1 also doesn't understand
what it is doing with unrolling, but with -O3 somehow it does more
unrolling that helps.
Reduce 1 of the the compiler pessimizations (copying a variable which
already satisfies an "rm" constraint in a good way by being in memory
and not used again, to different memory and accessing it there. Force
copying it to a register instead).
Try to optimize the inner loops significantly, so as to run at full
speed on smaller inputs. The algorithm is already very MD, and was
tuned for the throughput of 3 crc32 instructions per cycle found on
at least Sandybridge through Haswell. Now it is even more tuned for
this, so depends more on the compiler not rearranging or unrolling
things too much. The main inner loop for should have no difficulty
runing at full speed on these CPUs unless the compiler unrolls it too
much. However, the main inner loop wasn't even used for buffers smaller
than 24K. Now it is used for buffers larger than 384 bytes. Now it
is not so long, and the main outer loop is used more. The new
optimization is to try to arrange that the outer loop runs in parallel
with the next inner loop except for the final iteration; then reduce
the loop sizes significantly to take advantage of this.
Approved by: cem
Not tested in production by: bde
The build process generates *assym.h using nm from *genassym.o (which is
in turn created from *genassym.c).
When compiling with link-time optimization (LTO) using -flto, .o files
are LLVM bitcode, not ELF objects. This is not usable by genassym.sh,
so remove -flto from those ${CC} invocations.
Submitted by: George Rimar
Reviewed by: dim
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9659
Refresh upstream driver before impending conversion to iflib.
Major new features:
- Support for Fortville-based 25G adapters
- Support for I2C reads/writes
(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).
- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.
Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
Derived from an implementation by Mark Adler.
The fast loop performs three simultaneous CRCs over subsets of the data
before composing them. This takes advantage of certain properties of
the CRC32 implementation in Intel hardware. (The CRC instruction takes 1
cycle but has 2-3 cycles of latency.)
The CRC32 instruction does not manipulate FPU state.
i386 does not have the crc32q instruction, so avoid it there. Otherwise
the implementation is identical to amd64.
Add basic userland tests to verify correctness on a variety of inputs.
PR: 216467
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: kib@, markj@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9342
Wake-on-lan is not supported in production on any of our adapters, as
they don't have the required AUX power connector. (It's possible that
AUX power is supplied to some of our ALOM or mezz adapters, but if so
then we've never implemented or tested WoL support.)
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8972
Add SPI mode (PIO-only) support for Intel Synchronous Serial Port that
can be found in several Intel's products starting from PXA family.
Most of implementations have slight differences in behavior and in
addresses for registers subset. This driver covers only BayTrail SoC
implementation for it's the only hardware I have to test it on.
Driver attaches to ACPI bus only and does not have PCI or FDT support
for now due to lack of hardware to test it on.
"intelspi" is the best name I've managed to come up with. Linux driver
name (spi-pxa2xx) does not make sense because current implementation
does not support actual PXA2xx SoCs. And as far as I know there is no
codename assigned to Intel SSP chip.
Reviewed by: br, manu
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8896
