Commit Graph

29 Commits

Author SHA1 Message Date
Matt Jacob
e48b2487a0 Fix some stupid copyright mistakes that have been there for quite some time. 2007-03-10 02:39:54 +00:00
Matt Jacob
af4394d40a Don't attempt to load illegal hard loop addresses into
an ICB. This shows up on card restarts, and usually for
2200-2300 cards. What happens is that we start up,
attempting to acquire a hard address. We end up instead
being an F-port topology, which reports out a loop id
of 0xff (or 0xffff for 2K Login f/w). Then, if we restart,
we end up telling the card to go off an acquire this loop
address, which the card then rejects. Bah.

Compilation fixes from Solaris port.
2007-02-23 21:59:21 +00:00
Matt Jacob
10365e5a68 Add 4Gb (24XX) support and lay the foundation for a lot of new stuff. 2006-11-02 03:21:32 +00:00
Matt Jacob
8a97c03a7a Do various fixes to support firmware loading for the 2322
(and by extension, the 2422).

One peculiar thing I've found with the 2322 is that if you
don't force it to do Hard LoopID acquisition, the firmware
crashes. This took a while to figure out.

While we're at it, fix various bugs having to do with NVRAM
reading and option setting with respect to pieces of NVRAM.
2006-07-03 08:24:09 +00:00
Matt Jacob
1dae40eb49 a) clean up some declaration stuff (i.e., make more modern with respect
to getting rid u_int for uint and so on).

b) Turn back on 64 bit DAC support. Cheeze it a bit in that we have two
DMA callback functions- one when we have bus_addr_t > 4 bits in width and
the other which should be normal. Even Cheezier in that we turn off setting
up DMA maps to be BUS_SPACE_MAXADDR if we're in ISP_TARGET_MODE. More work
on this in a week or so.

c) Tested under amd64 and 1MB DFLTPHYS, sparc64, i386 (PAE, but insufficient
memory to really test > 4GB). LINT check under amd64.

MFC after:	1 month
2006-02-15 00:31:48 +00:00
Matt Jacob
e526523707 First of several commits as this driver is dusted off and maybe brought
up to date.  Principle changes for this reelase is to support 2K Port Login
firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only
come with the 2K Port Login firmware. The 2322 should now work- but we don't
have firmware sets for it in ispfw (as the change to load 2K Port Login f/w
hasn't been made- that f/w is so big it has to be loaded in more than one
chunk).

Other changes are the beginnings of cleaning up some long standing target
mode issues. The next changes here will incorporate a lot of bug fixes
from others.

Finally, some copyright cleanup and attempts to make the parts of the
driver that are FreeBSD specific start conforming more to FreeBSD style.

MFC after:	1 month
2006-01-23 06:23:37 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Matt Jacob
b894188248 Support for f/w crash dumps (2200 && 23XX).
If you want QLogic to look at a potential f/w problem for FC cards, you really
have to provide them info in the format they expect. This involves dumping
a lot of hardware registers (> 300 16 bit registers) and a lot of SRAM
(> 128KB minimum). Thus all of this code is #ifdef protected which will
become an option so that the memory allocation of where to dump the crash
image is pretty expensive. It's worth it if you have a reproducible problem
because they have some tools that can tell them, given the f/w version,
the precise state of everything.

MFC after:	1 week
2002-02-17 06:38:22 +00:00
Matt Jacob
75c1e828c0 + A variety of 23XX changes:
disable MWI on 2300

	based on function code, set an 'isp_port' for the 2312- it's a
	separate instance, but the NVRAM is shared, and the second port's
	NVRAM is at offset 256.

+ Enable RIO operation for LVD SCSI cards. This makes a *big* difference
as even under reasonable load we get batched completions of about 30
commands at a time on, say, an ISP1080.

+ Do 'continuation' mailbox commands- this allows us to specify a work
area within the softc and 'continue' repeated mailbox commands. This is
more or less on an ad hoc basis and is currently only used for firmware
loading (which f/w now loads substantially faster becuase the calling
thread is only woken when all the f/w words are loaded- not for each
one of the 40000 f/w words that gets loaded).

+ If we're about to return from isp_intr with a 'bogus interrupt' indication,
and we're not a 23XX card, check to see whether the semaphore register is
currently *2* (not *1* as it should be) and whether there's an async completion
sitting in outgoing mailbox0. This seems to capture cases of lost fast posting
and RIO interrupts that the 12160 && 1080 have been known to pump out under
extreme load (extreme, as in > 250 active commands).

+ FC_SCRATCH_ACQUIRE/FC_SCRATCH_RELEASE macros.

+ Endian correct swizzle/unswizzle of an ATIO2 that has a WWPN in it.

MFC after:	1 week
2002-02-04 21:04:25 +00:00
Matt Jacob
126ec86486 Add 2 Gigabit Fibre Channel support (2300 && 2312 cards). This required
some reworking (and consequent cleanup) of the interrupt service code.

Also begin to start a cleanup of target mode support that will (eventually)
not require more inforamtion routed with the ATIO to come back with the
CTIO other than tag.

MFC after:	4 weeks
2001-08-31 21:39:04 +00:00
Matt Jacob
144ff11903 Put in offset definitions for FPM and FBM registers, plus just enough
bits defined so we can reset them.
2001-01-15 18:37:14 +00:00
Matt Jacob
aa57fd6fa5 some copyright cleanups 2000-09-21 20:16:04 +00:00
Matt Jacob
a6db0ba6d3 Add in lengths of SBus or PCI registers. 2000-08-01 06:21:21 +00:00
Matt Jacob
40e88de6c3 Add mailbox bitmask macros (numbers of available mailbox registers
based upon Qlogic chip type). Define maximum mailboxes. Add INT_PENDING_MASK
macro. Change mailbox offset macro name.
2000-06-27 19:15:43 +00:00
Matt Jacob
22e83dac1e cleanup i_int_X vs. uint_X definitions 2000-06-18 04:43:55 +00:00
Matt Jacob
a96d513df9 The storage for WWN from NVRAM is actually the PORT WWN, not the NODE WWN. 2000-05-09 01:06:47 +00:00
Matt Jacob
c211f23b90 Add in 12160 (Ultra3) NVRAM definitions.
Approved: jkh@freebsd.org
2000-02-11 19:34:33 +00:00
Matt Jacob
22e1dc858b Add Dual LVD bus (1280) support 1999-12-16 05:42:02 +00:00
Matt Jacob
b996239f46 add in an INT_PENDING macro 1999-10-17 18:41:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Matt Jacob
981e6b253d Clean up some macros. Add in ISP 1080/1240 NVRAM layout definitions. 1999-05-11 05:01:26 +00:00
Matt Jacob
4394c92f52 Add in 1080 LVD support and some basis also for the 1240. The port database
printout is now enabled.
1999-03-25 22:52:45 +00:00
Matt Jacob
57c801f5cf A wad of changes- prepping for 1080/1240 support (which caused a massive
thwank in register layout goop). A different mboxcmd approach. Some PDB change
infrastructure. Some better management of loopdown/loopup events (keep them
distinct from resource starvation for simq freeze/unfreeze actions).
1999-03-17 05:04:39 +00:00
Matt Jacob
68ce4ba588 clean up some NVRAM defines 1999-02-09 01:09:35 +00:00
Matt Jacob
cbf57b472d Implement and use Fast Posting for both parallel && fibre. Redo a bit of
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).

Roll internal release tags.
1999-01-30 07:29:00 +00:00
Matt Jacob
c305536317 clarify headers;move uninit to outer layer;remove watchdog 1998-12-28 19:22:27 +00:00
Matt Jacob
f1535c024e offset was wrong for HARDLOOPID in NVRAM 1998-12-05 01:07:52 +00:00
Justin T. Gibbs
478f8a9685 Update QLogic ISP support for CAM. Add preliminary target mode support.
Submitted by:	Matthew Jacob <mjacob@feral.com>
1998-09-15 08:42:56 +00:00
Matt Jacob
6054c3f6f2 Add support for the Qlogic ISP SCSI && FC/AL Adapters 1998-04-22 17:54:58 +00:00