Commit Graph

187 Commits

Author SHA1 Message Date
Antoine Brodin
c42ddf78f3 usbdevs(8) is not obsoleted, just temporarily disconnected from the build
Noticed by:	ru@
2009-04-18 22:16:46 +00:00
Antoine Brodin
41c0e77598 Add more obsolete files, usb related. 2009-04-18 18:21:42 +00:00
Maxim Konovalov
830ceff933 o Reflect ar(4), ray(4), sr(4), raycontrol(8) removal. 2009-04-16 17:42:25 +00:00
Daniel Gerzo
88fd9cff39 - fix my previous commit (added missing .gz)
Submitted by:	brueffer
2009-04-10 22:15:01 +00:00
Daniel Gerzo
def925c574 - VOP_LEASE.9 has been removed
Approved by:	rwatson
2009-04-10 14:24:12 +00:00
Ruslan Ermilov
9596b6dea8 Removed more vestiges of if_sl(4). 2009-04-09 12:20:37 +00:00
Ruslan Ermilov
ecac0338c1 - Added libpcap.so.5 to OLD_LIBS.
- Added 32-bit versions of libusb20* to OLD_{LIBS,FILES}.
- Added 32-bit version of libmp.so.6 to OLD_LIBS.
2009-04-06 13:14:34 +00:00
Ed Schouten
d2a0bb0803 Remove if_ppp(4) and if_sl(4).
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).

If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.

Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
                lists.
2009-04-05 22:08:18 +00:00
Tom Rhodes
2364576d14 Use the real removal date for fla(4), put the entry with
other 2004* entries.
2009-04-01 09:37:00 +00:00
Tom Rhodes
f93ff25e48 Add an entry for fla.4. 2009-04-01 09:27:45 +00:00
Andrew Thompson
2b78d30630 Remove the uscanner(4) driver, this follows the removal of the kernel scanner
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).

Reviewed by:	HPS
2009-03-19 20:33:26 +00:00
Christian Brueffer
e17a240515 k8temp(4) has been renamed to amdtemp(4). 2009-03-18 18:42:58 +00:00
Andrew Thompson
e90540f2ba Fix up the entries for libusb, it seems it existed back in 2002 so it was
getting removed again.

Reported by:	Steve Kargl
2009-03-09 23:18:07 +00:00
Andrew Thompson
a091d2a525 Install libusb20.so.1 as libusb.so.1, there will be a followup commit to the
ports tree so that programs use libusb from the base by default. Thanks to
Stanislav Sedov for sorting out the ports build.

Bump __FreeBSD_version to 800069

Help and testing by:	stas
2009-03-09 17:05:31 +00:00
Ed Schouten
b3aaa0cc21 Rename all symbols in libmp(3) to mp_*, just like Solaris.
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.

libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.

Reviewed by:	deischen, rdivacky
2009-02-26 21:43:15 +00:00
Andrew Thompson
68ca00432b delete-old does not recursively delete dirs so list all its contents too.
Spotted by:	naddy
2009-02-24 16:47:59 +00:00
Andrew Thompson
0b3088ad05 Add ObsoleteFiles entries for the USB changeover. 2009-02-23 19:13:12 +00:00
Rafal Jaworowski
ab8b490a63 Initial gdbserver support for PowerPC.
Obtained from:	Juniper Networks, Semihalf
2009-02-23 18:22:49 +00:00
Ed Schouten
6a4dc56627 Add the pccard header files to ObsoleteFiles.inc.
Reviewed by:	imp
2009-02-15 18:30:44 +00:00
Marcel Moolenaar
d4f781711a Don't remove gdbserver on ARM. It's not obsolete. In fact,
it's quite nouveau...
2009-02-15 03:42:14 +00:00
Gabor Kovesdan
0928cdfc3f Reflect adding_user.8 -> adding_user.7 rename
Reminded by:	kib
2009-02-03 20:46:05 +00:00
Antoine Brodin
0f11b536ef Add obsolete files after tzdata2009a and file 4.26 imports 2009-01-25 19:03:30 +00:00
Antoine Brodin
35b81ec2e5 Add an obsolete file. 2009-01-03 11:25:50 +00:00
Bjoern A. Zeeb
f3b28b6bfb Remove long unused netinet/ipprotosw.h (basically since r82884).
Discussed with:		rwatson
MFC after:		4 weeks
2008-12-23 16:52:03 +00:00
Antoine Brodin
bf9b367941 Add more obsolete files. 2008-11-30 11:03:16 +00:00
Ed Schouten
66c6ebfe6b Several documentation fixups related to device minor/major numbers:
- Document the minor(3), major(3) and makedev(3) macro's. They also
  apply to umajor() and uminor() in the kernel, but hopefully we'll sort
  that out one day.

- Briefly dev2unit() inside the make_dev(9) manual page, since this is
  now the preferred macro to obtain character device unit numbers inside
  the kernel.

- Remove the device_ids(9) manual page. It contains highly inaccurate
  information, such as a description of the nonexistent major().
2008-09-28 20:15:45 +00:00
Antoine Brodin
de6e96573a Correct suser(9) entry. 2008-09-21 16:11:11 +00:00
Attilio Rao
cecd8edba5 Remove the suser(9) interface from the kernel. It has been replaced from
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.

This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.

This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.

Tested by:      Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by:    rwatson
2008-09-17 15:49:44 +00:00
Antoine Brodin
4e2941d821 Add an obsolete file: pax removed from rescue. 2008-09-14 17:49:46 +00:00
Antoine Brodin
c6642c52eb Add files to remove when WITHOUT_HESIOD is set.
This fixes "make check-old" when WITH_HESIOD is set.

PR:		122406
MFC after:	1 month
2008-09-13 17:29:49 +00:00
John Baldwin
26e4688329 Resurrect the sbni(4) driver. Someone finally tested the MPSAFE patches and
the driver worked ok with them.

Tested by:	friends of yar
2008-09-10 18:36:58 +00:00
Antoine Brodin
598027bb46 Add more obsolete files. 2008-08-31 08:33:41 +00:00
Ed Schouten
878f530ff8 Remove the now unneeded pt_chown utility.
Before we had a posix_openpt() that allocated PTY's with proper
permissions in place, we used this set-uid utility to change the
ownership of PTY slave devices to the real user ID of the process. This
utility was used to implement grantpt().

In my first designs of the MPSAFE TTY layer, I replaced this by adding
an ioctl() called TIOCGRANTPT, which was used to change the ownership.
I left the pt_chown utility, because older C libraries needed it to work
properly.

After some discussions back in June I changed the PTY code to set
permissions properly upon creation. Fortunately the previous grantpt()
implementation changed permissions by hand when pt_chown is not
installed, which always succeeds. This means grantpt() still works
properly, even though the set-uid utility is missing.

I've done tests with FreeBSD 5.2.1, FreeBSD 6.3 and FreeBSD 7.0 jails.
All of them still work if I remove pt_chown.

Reviewed by:	philip (ex-mentor)
2008-08-24 10:01:22 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
Ed Schouten
4ab0b22f96 Remove <sgtty.h> now it has no practical usage.
When I turned sgtty into a binary-only interface (last month), I added
this explicit #error to the header file, to make sure nobody forgot to
remove the header file after updating world.

I think it is now a good moment to remove this header file.

Approved by:	philip (mentor)
2008-07-25 12:37:46 +00:00
Marcel Moolenaar
42f17e8ce4 Remove sade(8) on the following platforms:
o  arm, mips & powerpc: libdisk is non-functional.
o  ia64: libdisk is insufficient.
2008-07-19 18:21:52 +00:00
Antoine Brodin
e7e0618629 Add an obsolete header after pecoff removal.
Approved by:	rwatson (mentor)
2008-07-13 17:17:35 +00:00
Marcel Moolenaar
c4c9b9f50c Obsolete bsdlabel(8) on powerpc. Use gpart(8) instead. 2008-07-06 20:57:35 +00:00
John Baldwin
a78c3ed89c Remove the sbsh(4) driver. No one responded to requests for testing the
MPSAFE patches on current@ and stable@.  This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context).  As
such, the driver shouldn't be working reliably even on 4.x.
2008-07-04 21:24:35 +00:00
John Baldwin
e9a31041c0 Remove the sbni(4) driver. No one responded to calls to test it on
current@ and stable@.
2008-07-04 21:06:57 +00:00
John Baldwin
2c6298572e Remove the oltr(4) driver. No one responded to calls for testing on
current@ and stable@ for the locking patches.  The driver can always be
revived if someone tests it.

This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
2008-07-04 18:58:53 +00:00
John Baldwin
94f923b69d Remove the arl(4) driver. It is reported to not work on 6.x or later
even though the driver hasn't changed since 4.x (last known working
release).
2008-07-04 18:15:36 +00:00
Marcel Moolenaar
9eda082d52 sunlabel(8) is specific to sparc64. Remove from other platforms.
use gpart(8) on all platforms.
2008-07-04 04:39:45 +00:00
Marcel Moolenaar
a0aaa49314 bsdlabel and fdisk are obsoleted on ia64.
While here, make sure to remove any remnants of the disklabel
manpage.
2008-07-03 21:00:16 +00:00
Daniel Gerzo
c1871fe5ec The example wpa_supplicant.conf file has been moved to share/examples/etc/,
see r180158 for references

Approved by:	brooks
MFC after:	3 days
2008-07-01 21:54:08 +00:00
Ed Schouten
45792eb9b8 Turn sgtty into a binary-only compatibility interface.
sgtty was the original interface to configure terminal attributes on my
UNIX-like operating systems. It has been deprecated by the POSIX termios
interface, which is implemented in almost any modern system.

An advantage of turning this into a binary compatibility interface, is
that we can now eventually remove the COMPAT_43TTY switch from kernel
configurations. This removes many ioctl()'s from the TTY layer.

While there, increase the __FreeBSD_version, which may be useful for the
people working on the Ports tree.

Reviewed by:	kib
Approved by:	philip (mentor)
2008-06-14 10:42:18 +00:00
Marcel Moolenaar
475232fc30 Removal of gpt(8) and manpage. 2008-06-09 21:36:46 +00:00
Bjoern A. Zeeb
906013e622 To both the (formerly) 'temporarily disconnected' netatm and I4B modules
add a comment "(removed 20080525)" to make clear that it is no longer
temporary.
2008-05-27 21:05:49 +00:00
Antoine Brodin
3c669ce6e6 Add more obsolete files.
Approved by:	rwatson (mentor)
2008-05-27 18:22:54 +00:00
Bjoern A. Zeeb
2e598474fa Remove ISDN4BSD (I4B) from HEAD as it is not MPSAFE and
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.

This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation

Discussed with: rwatson, re
2008-05-26 10:40:09 +00:00