Prepare the ground for a rework of the bridge locking approach. We will
use an epoch-based approach in the datapath and making it safe to
iterate over the interface, span and rtnode lists without holding the
BRIDGE_LOCK. Replace the relevant lists by their ConcurrencyKit
equivalents.
No functional change in this commit.
Reviewed by: emaste, ae, philip (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24249
This lock was made unnecessary by the addition of mac_policy_rms in r356120.
Reviewed by: mjg, kib
Differential Revision: https://reviews.freebsd.org/D24283
The reporter is developing a frame buffer driver for hardware using
3 bytes per pixel, but a stride that's a multiple of 256. Previously
this resulted in writing beyond the end of each stride. On the last
row this attempted to write past the end of the frame buffer, triggering
the assertion in vt_fb_mem_wr1().
PR: 243533
MFC after: 2 weeks
Submitted by: Thomas Skibo
Like the X5000, the main CPLD on the A1222 is the communication medium
between the CPU and the GPIO CPLD. It provides a mailbox communication
feature, along with dual-port RAM accessible from both the CPU and GPIO
CPLD, and 3 fan speed reporting registers.
sync it to disk before shrinking it. Complete the sync before getting
the buffer for the block to be updated to do the shrink to avoid
panicing with a recursive lock on one of the directory's buffers.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
boolean expressions so that their values are not lost when assigned to
`bool' or `int' variables.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
Also, print a little more information for otherwise unhandled inhibited states.
Finally, improve the grammar of some prints. Some of the print statements
missing verb.
Sponsored by: Dell EMC Isilon
Before the change, proxyarp checks for src and dst addresses
were performed using default fib, breaking multi-fib scenario.
PR: 245181
Submitted by: Scott Aitken (original version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24244
This is mostly indentation whitespace, and reflowing a few multiline
comments. This gets a bunch of minor stuff out of the way so that the diffs
for style don't clutter up the diffs for some upcoming functional changes.
Submitted by: Thomas Skibo
Differential Revision: https://reviews.freebsd.org/D24226
Coverity noted that cod pointer is always non-NULL at the end of
cryptodev_aead(). While here, fix cryptodev_op() to match by making
one earlier failure case before cod and crp are allocated just return
directly.
CID: 1422185
Reported by: Coverity
This driver supports SiFive's FE310 Always-on (AON) peripheral's
Real-time clock (RTC) and Watchdog timer (WDT). AON has other
functionality that this driver could support such as the power
management unit (PMU) but that functionality hasn't been implemented.
Reviewed by: philip (mentor), kp (mentor)
Approved by: philip (mentor)
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D24170
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
Assertions in crypto_dispatch() depend on this value being set to
verify that payload and AAD regions are in bounds. Also, requests
that use a single kernel buffer rely on this to know how long the
buffer is for bus_dma, etc.
Reported by: kp
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
This allows clean handoff from BIOS implementing some asynchronous I/O to
the OS AHCI driver. During attach driver declares OS ownership request
and waits from 25ms to 2s for BIOS to complete operation and release the
hardware.
MFC after: 2 weeks
JMB582 has 2 6Gbps SATA ports and PCIe 3.0 x1.
JMB585 has 5 6Gbps SATA ports and PCIe 3.0 x2.
Both chips support AHCI v1.31, Port Multiplier with FBS and 8 MSI vectors.
MFC after: 2 weeks
The log for the failure contained errors like this:
| In file included from ${SRCTOP}/sys/mips/nlm/dev/net/xlpge.c:34:
| In file included from ${SRCTOP}/sys/sys/systm.h:44:
| In file included from ./machine/atomic.h:849:
| ${SRCTOP}/sys/sys/_atomic_subword.h:222:37: error: unknown type name 'u_long'; did you mean 'long'?
| atomic_testandset_acq_long(volatile u_long *p, u_int v)
| ^~~~~~
| long
And similar "unknown type name" errors for u_int, not recognizing bool as a type, etc.
This was caused by including <sys/param.h> too far down; move it up where it belongs.
While here, add a blank line after '__FBSDID()', in keeping with convention.
Reviewed by: emaste
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D24242
for IPv4, enabled only for IPv6, and enabled for IPv4 and IPv6.
The current blackhole detection might classify a temporary outage as
an MTU issue and reduces permanently the MSS. Since the consequences of
such a reduction due to a misclassification are much more drastically
for IPv4 than for IPv6, allow the administrator to enable it for IPv6 only.
Reviewed by: bcr@ (man page), Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24219
Interfaces may be detached from a taskqueue_thread task, for example by
prison_complete(), so after r359438, when draining the queue we may end
up deadlocking.
Reported by: Jenkins via lwhsu
MFC with: r359438
KTLS uses the embedded header and trailer fields of unmapped
mbufs. This can lead to "silly" buffer lengths, where we have an
mbuf chain that will create a scatter/gather lists with a
regular pattern of 13 bytes followed by 16 bytes between each
adjacent TLS record.
For software ktls we typically wind up with a pattern where we
have several TLS records encrypted, and made ready at once. When
these records are made ready, we can coalesce these silly buffers
in sbready_compress by copying 13b TLS header of the next record
into the 16b TLS trailer of the current record. After doing so,
we now have a small 29 byte chunk between each TLS record.
This marginally increases PCIe bus efficiency. We've seen an
almost 1Gb/s increase in peak throughput on Broadwell based Xeons
running a 100% software TLS workload with Mellanox ConnectX-4
NICs.
Note that this change is ifdef'ed for KTLS, as KTLS is currently
the only user of the hdr/trailer feature of unmapped mbufs, and
peeking into them is expensive, since the ext_pgs struct lives in
separately allocated memory, and may be cold in cache.
This optimization is not applicable to HW ("NIC") TLS, as that
depends on having the entire TLS record described by a single
unmapped mbuf, so we cannot shift parts of the record between
mbufs for HW TLS.
Reviewed by: jhb, hselasky, scottl
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24204
- Do not call into a vnode pager while leaving some pages from the
same block as the current run, xbusy. This immediately deadlocks if
pager needs to instantiate the buffer.
- Only relookup bogus pages after io finished, otherwise we might
obliterate the valid pages by out of date disk content. While there,
expand the comment explaining this pecularity.
- Do not double-unbusy on error. Split unbusy for error case, which
is left in the sendfile_swapin(), from the more properly coded
normal case in sendfile_iodone().
- Add an XXXKIB comment explaining the serious bug in the validation
algorithm, not fixed by this patch series.
PR: 244713
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
It is already done by sendfile_iodone(), now consistently for all errors.
This de-facto reverts r358597, after r359466.
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
Now sfio leaks are more easily seen in the malloc statistics than
e.g. just wired or busy pages leak.
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
Implement one mutex per cuse(3) server instance which also cover the
clients belonging to the given server instance.
This should significantly reduce the mutex congestion inside the
cuse(3) kernel module when multiple servers are in use.
MFC after: 1 week
Sponsored by: Mellanox Technologies
device. This requires some structural refactoring inside the driver, mostly
about converting existing audio channel structures into arrays.
The main audio mixer is provided by the first PCM instance.
The non-first audio instances may only have a software mixer for PCM playback.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
key is pressed at the same time as a regular key, that means key with
modifier is output. Some automated USB keyboards like Yubikeys need this.
This fixes a regression issue after r357861.
Reported by: Adam McDougall <mcdouga9@egr.msu.edu>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
taskqgroup initialization was broken into two steps:
1. allocate the taskqgroup structure, at SI_SUB_TASKQ;
2. initialize taskqueues, start taskqueue threads, enqueue "binder"
tasks to bind threads to specific CPUs, at SI_SUB_SMP.
Step 2 tries to handle the case where tasks have already been attached
to a queue, by migrating them to their intended queue. In particular,
tasks can't be enqueued before step 2 has completed. This breaks NFS
mountroot on systems using an iflib-based driver when EARLY_AP_STARTUP
is not defined, since mountroot happens before SI_SUB_SMP in this case.
Simplify initialization: do all initialization except for CPU binding at
SI_SUB_TASKQ. This means that until CPU binding is completed, group
tasks may be executed on a CPU other than that to which they were bound,
but this should not be a problem for existing users of the taskqgroup
KPIs.
Reported by: sbruno
Tested by: bdragon, sbruno
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24188
Incompatibility between i386 and amd64 evdev ABIs was caused by presence of
'struct timeval' in evdev protocol. Replace it with 'struct timeval32' for
32 bit binaries.
Big-endian platforms may require additional work due to bitstr_t (array of
unsigned longs) usage in ioctl interface.
MFC after: 2 weeks
