NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
When loader(8) is built with zfs support enabled, it assumes that any extarg
data present is a zfs_boot_args struct, but if the first-stage loader was
gptboot(8) the extarg data is actually a geli_boot_args struct. Luckily,
zfsboot(8) and gptzfsboot(8) have always passed KARGS_FLAGS_ZFS along with
KARGS_FLAGS_EXTARG, so we can use KARGS_FLAGS_ZFS to decide whether the
extarg data is a zfs_boot_args struct.
To avoid similar problems in the future, gptboot(8) now passes a new
KARGS_FLAGS_GELI to indicate that extarg data is geli_boot_args. In
loader(8), if the neither KARGS_FLAGS_ZFS nor KARGS_FLAGS_GELI is set but
extarg data is present (which will be the case for gptboot compiled before
this change), we now check for the known size of the geli_boot_args struct
passed by the older versions of gptboot as a way of confirming what type of
extarg data is present.
In a semi-related tidying up, since loader's main() has already decided
what type of extarg data is present and set the global 'zargs' var
accordingly, don't repeat the check in extract_currdev, just check whether
zargs is NULL or not.
X-MFC after: a few days, along with prior related changes.
of args data between gptboot/zfsboot and loader(8).
Despite what seems like a lot of changes here, there are no actual
changes in behavior, or in the data layout in the structures involved.
This is just eliminating identical code pasted into multiple locations.
In detail, the changes are...
- Move struct zfs_boot_args definition from libsa/zfs/libzfs.h to
i386/common/bootargs.h because it is specific to x86 booting and the
handoff between zfsboot and loader, and has no relation to the zfs
library code in general.
- The geli_boot_args and zfs_boot_args structs both contain an identical
set of member variables containing geli information. Extract this out
to a new geli_boot_data struct, and embed it in the arg-passing structs.
- Provide new routines geli_import_boot_data() and geli_export_boot_data()
that can be shared between gptboot, zfsboot, and loader instead of
pasting identical code into several different .c files.
- Remove some checks for a NULL pointer that can never be true because the
pointer being tested was set using pointer math (kargs + 1) and that can
never result in NULL in this code.
Create unified block IO implementation in BIOS version, like it is done in UEFI
side. Implement fd, disk and cd device lists, this will split floppy devices
from disks and will allow us to have consistent, predictable device naming
(modulo BIOS issues).
Differential Revision: https://reviews.freebsd.org/D17888
The current chain command does accept only device, allow also a file to be used,
such as /boot/pmbr or /boot/mbr (or stored third party MBR/VBR block).
Also fix file descriptor leak.
Create loader_{4th,lua,simp}{,.efi}. All of these are installed by
default. Create LOADER_DEFAULT_INTERP to specify the default
interpreter when no other is specified. LOADER_INTERP is the current
interpreter language building. Turn building of lua on by default to
match 4th. simploader is a simplified loader build w/o any interpreter
language (but with a simple loader). This is the historic behavir you
got with WITHOUT_FORTH. Make a hard link to the default loader. This
has to be a hard link rather than the more desirable soft link because
older zfsboot blocks don't support symlinks.
RelNotes: Yes
Differential Revision: https://reviews.freebsd.org/D16705
zfsloader as a hard link. While newer ones do, the whole point of the
link was to transition to the new world order smoothly. A hard link is
less flexible, but it works and will result in fewer bumps. Adjust
UPDATING entry to match.
We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
Reduce by 1 the number of crazy libraries we need in stand by moving
geli into libsa (where architecturally it belonged all along). This
just moves things around without any code changes.
There's problems with them. The order of efi stuff isn't quite right,
and there's various problems. Revert until thos problems can be fixed.
Reviewed by: kevans@
r331321 delegated autoresizing to an efi-autoresizecons command that
currently is expected to be done in forth/lua prior to drawing anything
useful.
Add the Forth version of the lua addition in r331321, hook efi.4th up to be
installed.
efiboot? was written by dteske@; anything outside of that may be blamed on
me.
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
The Makefile gives the impression that ext2fs and msdos were excluded
(they weren't) and that you could exclude cd9660 and ufs support (you
couldn't). Allow those to be excluded.
We need to look, in the future, at trimming the number of supported
filesystems, and this will make that easier.
There's no reason to have multiple copies of lszfs and
reloadbe. Consolidate them into one location. Also ldi_get_size is the
same everywhere (except sparc64). Make it the same everywhere as the
common definition is more general and will work on spar64.
preference to LIBFICL{,32}. LIBFICL{,32} are now always defined, but
LDR_INTERP{,32} is defined empty when building w/o forth (aka the
simple interpreter) and defined to LIBFICL{,32} when we are building
forth.
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.
Submitted by: Netflix
HELP_FILES is a loader only thing, so move it to loader.mk. Only
generate the help file if HELP_FILES is defined. Adjust Makefiles to
new convention. Fix a few cases where ${.CURDIR}/ was missing
resulting in missing bits from the help files.
Sponsored by: Netflix
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.
Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.
Sponsored by: Netflix
