Commit Graph

17 Commits

Author SHA1 Message Date
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Matthew Dillon
2afac34da3 Make various posix4 system calls MPSAFE (will fixup syscalls.master later)
sched_setparam()
    sched_getparam()
    sched_setscheduler()
    sched_getscheduler()
    sched_yield()
    sched_get_priority_max()
    sched_get_priority_min()
    sched_rr_get_interval()
2001-08-31 22:34:40 +00:00
Robert Watson
a0f75161f9 o Replace calls to p_can(..., P_CAN_xxx) with calls to p_canxxx().
The p_can(...) construct was a premature (and, it turns out,
  awkward) abstraction.  The individual calls to p_canxxx() better
  reflect differences between the inter-process authorization checks,
  such as differing checks based on the type of signal.  This has
  a side effect of improving code readability.
o Replace direct credential authorization checks in ktrace() with
  invocation of p_candebug(), while maintaining the special case
  check of KTR_ROOT.  This allows ktrace() to "play more nicely"
  with new mandatory access control schemes, as well as making its
  authorization checks consistent with other "debugging class"
  checks.
o Eliminate "privused" construct for p_can*() calls which allowed the
  caller to determine if privilege was required for successful
  evaluation of the access control check.  This primitive is currently
  unused, and as such, serves only to complicate the API.

Approved by:	({procfs,linprocfs} changes) des
Obtained from:	TrustedBSD Project
2001-07-05 17:10:46 +00:00
Robert Watson
e84b7987bc o Unfold p31b_proc() into the individual posix4 system calls so as to
allow call-specific authorization.
o Modify the authorization model so that p_can() is used to check
  scheduling get/set events, using P_CAN_SEE for gets, and P_CAN_SCHED
  for sets.  This brings the checks in line with get/setpriority().

Obtained from:	TrustedBSD Project
2001-06-30 07:55:19 +00:00
Robert Watson
1af55356f8 Replace some use of 'p' with 'targetp' so as to not scarily overload the
passed 'p' argument.  No functional change.

Obtained from:	USENIX Emporium, Cheap Tricks Department
2001-06-30 03:13:36 +00:00
Robert Watson
64e55bf47b Remove a fascinating but confusing construct involving chaining
conditional clauses in the following way:

	(0 || a || b);

No functional change.
2001-06-28 23:02:09 +00:00
Robert Watson
e8f7a95298 Add error checking for copyin() operations in posix4 scheduling code. 2001-06-28 22:53:42 +00:00
Robert Watson
b1fc0ec1a7 o Merge contents of struct pcred into struct ucred. Specifically, add the
real uid, saved uid, real gid, and saved gid to ucred, as well as the
  pcred->pc_uidinfo, which was associated with the real uid, only rename
  it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
  corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
  original macro that pointed.
  p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
  p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
  cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
  cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
  we figure out locking and optimizations; generally speaking, this
  means moving to a structure like this:
        newcred = crdup(oldcred);
        ...
        p->p_ucred = newcred;
        crfree(oldcred);
  It's not race-free, but better than nothing.  There are also races
  in sys_process.c, all inter-process authorization, fork, exec, and
  exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
  remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
  use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
  pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
  allocation.
o Clean up ktrcanset() to take into account changes, and move to using
  suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
  calls to better document current behavior.  In a couple of places,
  current behavior is a little questionable and we need to check
  POSIX.1 to make sure it's "right".  More commenting work still
  remains to be done.
o Update credential management calls, such as crfree(), to take into
  account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
      change_euid()
      change_egid()
      change_ruid()
      change_rgid()
      change_svuid()
      change_svgid()
  In each case, the call now acts on a credential not a process, and as
  such no longer requires more complicated process locking/etc.  They
  now assume the caller will do any necessary allocation of an
  exclusive credential reference.  Each is commented to document its
  reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
  and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
  questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
  processes and pcreds.  Note that this authorization, as well as
  CANSIGIO(), needs to be updated to use the p_cansignal() and
  p_cansched() centralized authorization routines, as they currently
  do not take into account some desirable restrictions that are handled
  by the centralized routines, as well as being inconsistent with other
  similar authorization instances.
o Update libkvm to take these changes into account.

Obtained from:	TrustedBSD Project
Reviewed by:	green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
Robert Watson
29b2efeb6b o First step in cleaning up authorization code for the posix4
implementation.  Move from direct uid 0 comparision to using suser_xxx()
  call with the same semantics.  Simplify CAN_AFFECT() macro as passed
  pcred was redundant.  The checks here still aren't "right", but they
  are probably "better".

Obtained from:	TrustedBSD Project
2001-05-06 16:15:42 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
John Baldwin
33a9ed9d0e Change the pfind() and zpfind() functions to lock the process that they
find before releasing the allproc lock and returning.

Reviewed by:	-smp, dfr, jake
2001-04-24 00:51:53 +00:00
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Peter Wemm
e91896117b Well folks, this is it - The second stage of the removal for build support
for LKM's..
1999-04-17 08:36:07 +00:00
Peter Dufault
ce47711dee Set PAGE_SIZE for _SC_PAGESIZE sysconf(). 1998-06-01 21:54:43 +00:00
Peter Dufault
aebde78243 1. Add new defs for mins and maxs for the POSIX flavor priorities. They
end up being the same, but it doesn't look like you're comparing
apples and oranges.

2. Use need_resched instead of reset_priority.  This isn't right
either, since for example you'll round-robin against equal priority FIFO
processes when lowering the priority of another process,
but this works better and a real fix needs to be in kern_synch and
not out here.

3. This is not a device driver: copyin/copyout the structure.
1998-05-19 21:11:53 +00:00
Peter Dufault
2a61a11038 1. Don't use "nosys" and generate coredumps for unconfigured
system calls - return ENOSYS per the spec.

2. Fix interface stub to set priority properly.
1998-05-18 12:53:45 +00:00
Peter Dufault
8a6472b723 Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and
_KPOSIX_PRIORITY_SCHEDULING options to work.  Changes:

Change all "posix4" to "p1003_1b".  Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;

Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;

Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;

Add options to LINT;

Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00