The previously activated BE should have canmount=noauto set on it upon
activation of the new BE, but we previously did not touch canmount on either
old or new BE.
PR: 233113
MFC after: 3 days
r336984 exposed the bug fixed in r340241, leading to the initial revert
while the bug was being hunted down. Now that the bug is fixed, we
can revert the revert.
Discussed with: alc
MFC after: 3 days
-P was introduced in 4.4BSD-Lite2 around 1994. It overwrote file contents
with a pass of 0xff, 0x00, then 0xff, in a low effort attempt to "really
delete" files.
It has no user-visible effect; at the end of the day, the file is unlinked via
the filesystem. Furthermore, the utility of overwriting files with patterned
data is extremely limited due to caveats at every layer of the stack[0] and
therefore mostly futile. At the least, three passes is likely wasteful on
modern hardware[1]. It could also be seen as a violation of the "Unix
Philosophy" to do one thing per tiny, composable program.
Since 1994, FreeBSD has left it alone; OpenBSD replaced it with a single
pass of arc4random(3) output in 2012[2]; and NetBSD implemented partial, but
explicitly incomplete support for U.S. DoD 5220.22-M, "National Industrial
Security Program Operating Manual" in 2004[3].
NetBSD's enhanced comment above rm_overwrite makes a strong case for removing
the flag entirely:
> This is an expensive way to keep people from recovering files from your
> non-snapshotted FFS filesystems using fsdb(8). Really. No more.
>
> It is impossible to actually conform to the exact procedure given in
> [NISPOM] if one is overwriting a file, not an entire disk, because the
> procedure requires examination and comparison of the disk's defect lists.
> Any program that claims to securely erase *files* while conforming to the
> standard, then, is not correct.
>
> Furthermore, the presence of track caches, disk and controller write
> caches, and so forth make it extremely difficult to ensure that data have
> actually been written to the disk, particularly when one tries to repeatedly
> overwrite the same sectors in quick succession. We call fsync(), but
> controllers with nonvolatile cache, as well as IDE disks that just plain lie
> about the stable storage of data, will defeat this.
>
> [NISPOM] requires physical media destruction, rather than any technique of
> the sort attempted here, for secret data.
As a first step towards evental removal, make it a placebo. It's not like
it was serving any security function. It is not defined in or mentioned by
POSIX.
If you are security conscious and need to erase your files, use a
woodchipper. At a minimum, the entire disk needs to be overwritten, not
just one file.
[0]: https://www.ru.nl/publish/pages/909282/draft-paper.pdf
[1]: https://commons.erau.edu/cgi/viewcontent.cgi?article=1131&context=jdfsl
[2]: https://github.com/openbsd/src/commit/7c5c57ba81b5fe8ff2d4899ff643af18c
[3]: https://github.com/NetBSD/src/commit/fdf0a7a25e59af958fca1e2159921562cd
Reviewed by: markj, Daniel O'Connor <darius AT dons.net.au> (previous version)
Differential Revision: https://reviews.freebsd.org/D17906
make buildenv can be used for building for the same architecture as
the host (perhaps this is a degenerate case of cross-building).
TARGET and TARGET_ARCH do not need to be set in this case.
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10759
Various improvements to the netmap pkt-gen program:
- indentation fixes
- support for IPV6
- fixes to checksum computation
- support for NS_MOREFRAG
- rate limiting in ping mode
Reviewed by: bcr, 0mp
Approved by: gnn (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17698
of jails. Jails have their own user/group databases and this script
can produce multiple false warnings, not to mention significant extra
load in case of large jailed subtrees. Leave this check for jailed
invocations of the same script.
MFC after: 1 month
a list of configured non-wildcard jails with their parameters,
no matter running or not.
The option -e takes separator argument that is used
to separate printed parameters. It will be used with following
additions to system periodic scripts to differentiate parts
of directory tree belonging jails as opposed to host's.
MFC after: 1 month
The new default config will only include files from the following
directories which end with '.conf' and do not beginning with a '.'
character:
- /etc/newsyslog.conf.d/
- /usr/local/etc/newsyslog.conf.d/
This matches the syslog.conf(5) functionality, and also prevents '.sample' or
'.pkgnew' files being included. This is important for ports which install files
in /usr/local/etc/newsyslog.conf.d/ and also for pkgbase.
Approved by: eadler
Approved by: bapt
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17086
fusefs is inconsistently named. The kernel module is named "fuse", but the
mount helper is named "mount_fusefs" and the jail(8) parameter is named
"allow.mount.fusefs". Special case it in libjail.
Reviewed by: jamie
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17929
Such fragments are obviously invalid, and when processed may end up
violating the sort order (by offset) of fragments of a given packet.
This doesn't appear to be exploitable, however.
Reviewed by: emaste
Discussed with: jtl
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17914
Maxmem is the highest address for physical memory in the system. It's
measured in pages which, since max() returns a u_int, should allow for up to
2^44 bytes of memory addressable by the system. However, on POWER9 systems
at least, memory addressed by additional socketed CPUs begins at addresses
far above the 2^44 mark, causing issues with memory accesses and DMA, when
memory is addressed on the auxiliary CPUs. Use the MAX() macro instead,
which doesn't convert arguments, so retains Maxmem and all calculations as
its defined long type (64-bit on powerpc64), keeping the maximum address
correct.
Submitted by: mmacy
This covers scenario when ARC may not shrink as fast as it could:
1. arc_size < arc_c and arc_adjust() does not evict anything, returning
zero to arc_reclaim_thread();
2. arc_available_memory() reports memory pressure, which can not be
satisfied by arc_kmem_reap_now();
3. arc_shrink() reduces arc_c and calls arc_adjust(), return of which is
ignored;
4. even if the last arc_adjust() could not satisfy arc_size < arc_c,
arc_reclaim_thread() will still go to sleep, since the first one
returned zero.
Reviewed by: allanjude, markj, sef
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D17927
The first packet after the ring is initialized was never
completed as isc_txd_credits_update() would not include it in the
count of completed packets. This caused netmap to never complete
a batch. See PR 233022 for more details.
PR: 233022
Reported by: lev
Reviewed by: lev
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17931
r254889 added tcp_state_change() as a centralized place to log state
changes in TCP connections for DTrace. r294869 and r296881 took
advantage of this central location to manage per-state counters.
However, TOE sockets were still performing some (but not all) state
change updates via direct assignments to t_state. This resulted in
state counters underflowing when TOE was in use. Fix by using
tcp_state_change() when changing a TOE connection's state.
Reviewed by: np, markj
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17915
As dev_t is now a 64-bit integer, it requires special handling as a
system call argument. 64-bit arguments are split between two 64-bit
integers due to the way arguments are promoted to allow reuse of most
system call implementations. They must be reassembled before use.
Further, 64-bit arguments at an odd offset (counting from zero) are
padded and slid to the next slot on powerpc and mips. Fix the
non-COMPAT11 system call by adding a freebsd32_mknodat() and
appropriately padded declerations.
The COMPAT11 system calls are fully compatible with the 64-bit
implementations so remove the freebsd32_ versions.
Use uint32_t consistently as the type of the old dev_t. This matches
the old definition.
Reviewed by: kib
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17928
It is required by llvm-profdata, now built by default under the
LLVM_COV knob. The additional complexity that would come from avoiding
building it if CLANG_EXTRAS and LLVM_COV are both disabled is not worth
the small savings in build time.
Sponsored by: The FreeBSD Foundation
r306041 changed ld invocations for converting binary files to kernel
ELF objects to pass -m, but missed bespoke ld invocations in a pair of
arm file configs (one of which has since been removed).
This is needed to support some external toolchains and lld.
Sponsored by: The FreeBSD Foundation
llvm-profdata is used with llvm-cov for code coverage (although llvm-cov
can also operate independently in a gcov-compatible mode).
Although llvm-profdata can be used independently of llvm-cov it makes
sense to group these under one option.
Also handle these in OptionalObsoleteFiles.inc while here.
Sponsored by: The FreeBSD Foundation
Bugs range from failure to update after changing syscall implementaion
names to using the wrong name. Somewhat confusingly, the name in
capabilities.conf is exactly the string that appears in syscalls.master,
not the name with a COMPAT* prefix which is the actual function name.
Found while making a change to use the default capabilities.conf.
Fixes: r335177, r336980, r340272, r340274, others
Reviewed by: kib, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17925
llvm-cov provides a gcov-compatible interface when invoked as gcov.
Reviewed by: dim, markj
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17923
This fixes alignment in vi's 'viusage' command and has been fixed
upstream and in OpenBSD.
Submitted by: Raf Czlonka (github:rjc)
MFC after: 1 week
Pull Request: https://github.com/freebsd/freebsd/pull/122
Replace hard-coded epair0b with the variable holds the real epair interface
used for testing.
Reviewed by: kp
Approved by: emaste, markj (mentors)
MFC with: r339836
Sponsored by: The FreeBSD Foundation
The difference between EXERROR and EXEXEC was that EXEXEC passed along
exitstatus and EXERROR set exitstatus to 2 in the handling code.
By changing the places that raised EXERROR to set exitstatus to 2, the
handling of EXERROR and EXEXEC becomes the same.
Add the lb program, which is able to load-balance input traffic
received from a netmap port over M groups, with N netmap pipes in
each group. Each received packet is forwarded to one of the pipes
chosen from each group (using an L3/L4 connection-consistent hash function).
This also adds a man page for lb and some cross-references in related
man pages.
Reviewed by: bcr, 0mp
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17735
This was shown to be a problem by side effect of now-enabled test case,
which was going through C, en_US.UTF-8, ja_JP.SJIS, and ja_JP.eucJP,
and failing eventually as data in mbrtowc's mbstate, that was
perfectly correct for en_US.UTF-8 was treated as incorrect for
ja_JP.SJIS, failing the entire test case.
This makes the persistent mbstates to be per ctype-component,
and not per-locale so we could easily reset the mbstates when
only LC_CTYPE is changed.
Reviewed by: bapt, pfg
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17796
Summary: When compiling for ELFv2, it is necessary to adjust the offset to
get_spr and factor in the function prologue to ensure the correct instruction is
being edited.
Test Plan:
Before:
```
db> show spr 110
KDB: reentering
KDB: stack backtrace:
0xc008000020fb96e0: at 0xc000000002bb2e34 = kdb_backtrace+0x68
0xc008000020fb97f0: at 0xc000000002bb3798 = kdb_reenter+0x54
0xc008000020fb9860: at 0xc000000002f87090 = trap+0x4e4
0xc008000020fb9990: at 0xc000000002f78a60 = powerpc_interrupt+0x110
0xc008000020fb9a20: kernel trap 0xe40 by 0xc000000002401978 = get_spr+0x8: srr1=0x9000000000001032
r1=0xc008000020fb9cd0 cr=0x80009438 xer=0x20040000 ctr=0xc000000002f7b40c r2=0xc0000000037fd000
saved LR(0xfffffffffffffffb) is invalid.
```
After:
```
db> show spr 110
SPR 272(110): c000000003cae900
```
Submitted by: git_bdragon.rtk0.net
Differential Revision: https://reviews.freebsd.org/D17813
It seems this tag is causing problems on POWER9 systems. Since no POWER9 user
has encountered the problem fixed by r339589 just restrict it to POWER8 for now.
A better fix will likely be to update powerpc/busdma_machdep.c to handle the
window correctly.
Reported by: mmacy, others
icmp_error allocates either an mbuf (with pkthdr) or a cluster depending
on the size of data to be quoted in the ICMP reply, but the calculation
failed to account for the additional padding that m_align may apply.
Include the ip header in the size passed to m_align. On 64-bit archs
this will have the net effect of moving everything 4 bytes later in the
mbuf or cluster. This will result in slightly pessimal alignment for
the ICMP data copy.
Also add an assertion that we do not move m_data before the beginning of
the mbuf or cluster.
Reported by: A reddit user
Reviewed by: bz, jtl
MFC after: 3 days
Security: CVE-2018-17156
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17909
If another thread immediately removes the link-local address
added by in6_update_ifa(), in6ifa_ifpforlinklocal() can return NULL,
so the following assertion (or dereference) is wrong.
Remove the assertion, and handle NULL somewhat better than panicking.
This matches all of the other callers of in6_update_ifa().
PR: 219250
Reviewed by: bz, dab (both an earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17898