Commit Graph

57 Commits

Author SHA1 Message Date
Ruslan Ermilov
9b88faecd3 Prepare for mdoc(7)NG. 2000-12-19 16:00:12 +00:00
Ruslan Ermilov
8fe908ef0c mdoc(7) police: use the new features of the Nm macro. 2000-11-20 19:21:22 +00:00
Bruce Evans
e6ebb8d8a8 Use the correct timestamp for the -C -p case when the comparison fails.
A garbage timestamp was used for at least installing /dev/null with -C -p
when the target doesn't already exist.
2000-10-08 09:17:56 +00:00
Josef Karthauser
141d77b8cb Switch over to using the new fflagstostr and strtofflags library calls. 2000-06-17 14:19:33 +00:00
Philippe Charnier
dbb9d8f826 Add DIAGNOSTICS section name 2000-03-26 15:06:46 +00:00
Sheldon Hearn
87faa07bec Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 12:20:22 +00:00
Josef Karthauser
418d67b0d9 Revert part of the last commit, remove {g|s}etflags from the libc
interface, and statically link them to the programs using them.
These functions, upon reflection and discussion, are too generically
named for a library interface with such specific functionality.
Also the api that they use, whilst ok for private use, isn't good
enough for a libc function.

Additionally there were complications with the build/install-world
process.  It depends heavily upon xinstall, which got broken by
the change in api, and caused bootstrap problems and general mayhem.

There is work in progress to address future problems that may be
caused by changes in install-chain tools, and better names for
{g|s}etflags can be derived when some future program requires them.
For now the code has been left in src/lib/libc/gen (it started off
in src/bin/ls).

It's important to provide library functions for manipulating file
flag strings if we ever want this interface to be adopted outside
of the source tree, but now isn't necessarily the right moment
with 4.0-release just around the corner.

Approved:	jkh
2000-02-05 18:42:36 +00:00
Josef Karthauser
18c0eeddf7 Historically file flags (schg, uschg, etc) have been converted from
string to u_long and back using two functions, flags_to_string and
string_to_flags, which co-existed with 'ls'.  As time has progressed
more and more other tools have used these private functions to
manipulate the file flags.

Recently I moved these functions from /usr/src/bin/ls to libutil,
but after some discussion with bde it's been decided that they
really ought to go in libc.

There are two already existing libc functions for manipulating file
modes:  setmode and getmode.  In keeping with these flags_to_string
has been renamed getflags and string_to_flags to setflags.

The manual page could probably be improved upon ;)
2000-01-27 21:17:01 +00:00
Bruce Evans
ed92ab90fc Actually remove unrequired SRCS. 2000-01-05 19:22:10 +00:00
Josef Karthauser
cd2a718f1e Added missing DPADD's. Removed unrequired SRCS's.
Obtained from:	bde
2000-01-01 15:44:11 +00:00
Josef Karthauser
edc2844c9f Moved flags_to_string and string_to_flags into libutil. It's used in
many places nowadays.
1999-12-30 13:15:15 +00:00
David E. O'Brien
402dcc8d51 Add "-v" to usage(). 1999-12-06 05:02:32 +00:00
David E. O'Brien
522f2bf89b Document the "-v" flag. [It was like that when I got here.. honestly.] 1999-12-06 05:01:14 +00:00
Bill Fumerola
a590ad80ac -Wall fixes.
Submitted by:	nrahlstr
1999-09-27 00:36:03 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Warner Losh
1202b72441 Free memory from setmode.
Obtained from: OpenBSD
1998-12-16 04:51:27 +00:00
Dag-Erling Smørgrav
1fd98d7d88 Calls one or more of malloc(), warn(), err(), syslog(), execlp() or
execvp() in the child branch of a vfork(). Changed to use fork()
instead.

Some of these (mv, find, apply, xargs) might benefit greatly from
being rewritten to use vfork() properly.

PR:		Loosely related to bin/8252
Approved by:	jkh and bde
1998-10-13 14:52:33 +00:00
Peter Wemm
30035fd505 fchflags(8) -> fchflags(2)
Submitted by:  Kenneth Merry <ken@plutotech.com>

Also, while here, mention that other FS's don't do flags.
1998-06-10 07:17:59 +00:00
Peter Wemm
defff80956 Treat an EOPNOTSUPP from fchflags() as a non-fatal case. Only warn about
it if flags were explicitly specified on the command line.  Do not warn
if we were merely trying to preserve flags or remove UF_NODUMP.  NFS does
not support flags.

I'm not sure that this is ideal, but it should do for now.  Installing
a plain file onto a NFS server must work, we used to silently ignore the
attempt.  Doing a binary install looses the flags anyway since cpio
doens't preserve them with the cdrom/network images.
XXX make world should not use flags or chown/chgrp in the obj/tmp area.

This is based on a suggestion from Ken Merry <ken@plutotech.com>.
1998-06-02 12:00:08 +00:00
Bruce Evans
8339e4f43d Converted to Lite2 mount interface - don't use numeric filesystem
types.  The NetBSD compatibility cruft was more correct for -current
than FreeBSD's own code.  It just used NetBSD #defines instead of
string literals for the filesystem names.  NetBSD's MOUNT_UFS is
"ffs", so using a literal "ufs" gives wrong results, but this is
unimportant, especially for bootstrapping.

Fixed style bugs in trymmap().

Fixed some disordered declarations.
1998-01-20 13:52:32 +00:00
Alexander Langer
01b67e0e07 Change MAP_FAILED to type void *.
Typo fix.
1998-01-13 02:12:43 +00:00
Peter Wemm
ff8962446b Add an option (-M) to install to disable use of mmap(2). This is kinda
handy at the moment with -current's mmap+unlink interactions..  The
problems seem worst when using INSTALL="install -C" in /etc/make.conf.
This could well come in handy in the future too.
1998-01-11 11:43:36 +00:00
John Birrell
d9b8124d7d Allow install to build from FreeBSD source using NetBSD tools and
headers during the port of FreeBSD to a NetBSD supported architecture.
FreeBSD needs to be able to install itself from very early on.
1998-01-09 06:05:13 +00:00
Andrey A. Chernov
2d9c794b58 1) Create intermediate directories with 755, not 777
2) Exit with error diagnostic if file exists but not a directory (-d)
3) Do chmod independently of chown (-d)
1997-10-28 14:20:10 +00:00
Andrey A. Chernov
cf57a56c94 1) Ignore -C with -d, not fail (for $(INSTALL) macro from /etc/make.conf)
2) When uid/gid not specified, not try to set 0:0 owner, just do nothing.
It makes possible to use install -d by users without setting
their uid:gid each time.
3) Be more specific where install_dir fails
1997-10-27 22:53:33 +00:00
Peter Wemm
387dcb61ff When calling strip, temporarily close the file, call strip and then
reopen it after strip has finished.  This makes it work when
/usr/bin/strip replaces the file rather than doing an in-place edit
(such as the binutils-2.8 strip, which is a variation of objcopy).
This is necessary if install(1) and strip(1) are going to cooperate
on an ELF system.
1997-09-14 08:21:44 +00:00
Philippe Charnier
7d85a3e836 Uncomment sccsid string and enclose it inside #if 0/#endif.
Cosmetic in man page.
1997-08-27 06:29:23 +00:00
Peter Wemm
503397df4f Bootstrap aid from older releases.. 'make world' can't build xinstall
until the includes are installed, and it doesn't install the includes until
xinstall is built (the previous xinstall binary may not have -C).  As a
bandaid, define MAP_FAILED ourselves if <sys/mman.h> didn't.  Perhaps it
would be safer to simply disable mmap if all the prerequisites are not
there.
1997-05-24 05:39:19 +00:00
Warner Losh
1c8af87873 compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.
1997-03-29 04:34:07 +00:00
Peter Wemm
c115df18cd Revert $FreeBSD$ to $Id$ 1997-02-22 19:58:13 +00:00
Alexander Langer
8abdc2eb40 Sweep through the tree fixing mmap() usage:
- Use MAP_FAILED instead of the constant -1 to indicate
    failure (required by POSIX).
  - Removed flag arguments of '0' (required by POSIX).
  - Fixed code which expected an error return of 0.
  - Fixed code which thought any address with the high bit set
    was an error.
  - Check for failure where no checks were present.

Discussed with:	bde
1997-01-16 21:58:40 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Warner Losh
a3e5ddb707 Sync usage line to man page, per style(9).
Pointed out by: Bruce Evans <bde@zeta.org.au>
1996-10-01 03:59:57 +00:00
Warner Losh
61c866689b Submitted by: Bruce Evans
Remove -S for the install usage message
Make the install usage message < 80 columns wide
Place the dodir declaration in order.
1996-09-29 23:09:51 +00:00
Warner Losh
a9c6b614f6 Implement -d in install. Update the man page to reflect this change. 1996-09-29 06:29:54 +00:00
Warner Losh
a27010239a Use EX_* exit values, from NetBSD 1996-09-28 02:53:45 +00:00
Bruce Evans
bda1d7064e Changed 'd' to 'D' in getopt arg too. 1996-09-24 17:29:42 +00:00
Warner Losh
bc2b054885 Per discussions in -current
- Change the debug flag from -d to -D to avoid conflict with other
	  install programs.
	- Update man page to reflect this
	- Update usage string
-d meaning creat directory is specifically not implemented by these changes.
1996-09-24 04:15:02 +00:00
Peter Wemm
e547f8e83a Be more careful with mmap. If it fails, fall back to a plain compare or
copy.

Dont leave stray INS@xxxx temp files around, especially when installing
something less than 8MB and the destination runs out of space, etc.

It still doesn't clean up the temp files on SEGV or other signals etc.
1996-09-05 07:54:08 +00:00
Peter Wemm
8a4854e0f7 accidently removed the "dont compare > 8MB files hack".
didn't rewind the files after the read()s in the non-mmap compare.
1996-09-05 07:33:24 +00:00
Peter Wemm
7b7fc30379 Only attempt to mmap() files from a ufs or cd9660 fs for comparing or
installing.  mmap'ing stuff over a nfs mount took out my machine during
a 'make world' last night while I was asleep.  I started out with a list
of fs's to avoid, when I realised that I really didn't know which ones
were safe with mmap, so I went for the ones I knew and implemented a
fallback compare.
1996-09-05 07:27:43 +00:00
Peter Wemm
c00062b834 Add a simple -v (verbose) option that allows you to see when -C actually
installs something.  This is not 100% right, since it has a false hit
when install -C snaps hard links.

Also, run strip(1) from the $PATH, otherwise you need a special version
of install to install (say) elf binaries which have a different strip.
With JDP's elfkit, the layout of the path determines which binary format
you are generating.
1996-08-12 17:03:30 +00:00
Bruce Evans
7739e56802 Made strip failures fatal. This fixes PR 1328. 1996-06-23 12:59:18 +00:00
Joerg Wunsch
98fd61c0a2 Don't reference NULL pointers if owner and/or group are omitted.
Pointed out by:  somebody on the mailing list who's name i forgot
1996-04-08 10:59:36 +00:00
Julian Elischer
b897ddafe5 Submitted by: archie@tribe.com
allow the user to install using a Numeric GID or UID.
this brings it in to line with chgrp and chown, ans is required
by some people using FreeBSD in a product.
1996-04-06 01:50:40 +00:00
Mike Pritchard
ade9638b8a Fix a couple of typos.
Submitted by:	Philippe Charnier <charnier@limrr.fr>
1996-03-11 03:31:51 +00:00
Paul Traina
2e2b09d90d Kludge-fix for a specific instance of bin/517.
The real fix requires changes to getpwent(3) and friends and getgrent(3)
and friends.

Submitted by:	Tim Wilkinson
1996-02-08 06:17:50 +00:00
Mike Pritchard
4a8d02835c Fix a bunch of spelling errors in a bunch of man pages. 1996-01-30 13:52:50 +00:00
Bruce Evans
de264c2bd8 Add options -C (same as -c except for preserving the modification
time of the target if the target file is the same as the source),
-d (debug), and -p (same as -C except for preserving the modification
time of the source if the target doesn't exists or is different from
the source.

Use library err() functions instead of our own and pass them better
exit codes.

Submitted by:	wollman (and changed a lot by me)
1995-10-09 07:21:00 +00:00
David Greenman
7e877393a8 Backed out change in rev 1.2. 1995-08-27 02:02:19 +00:00