Commit Graph

309 Commits

Author SHA1 Message Date
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Archie Cobbs
7d78074030 Add missing braces.
Submitted by:	Andrew Lankford <arlankfo@141.com>
2003-04-28 20:38:05 +00:00
Robert Watson
dbf4bdffd9 Remove extraneous reference to intrq.h, which broke the kernel build. 2003-04-21 03:17:27 +00:00
Poul-Henning Kamp
11589318f3 KASSERT that NG_MKMESSAGE() is not called with mbuf flags. 2003-04-18 12:37:33 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Dag-Erling Smørgrav
f7854568f5 Don't use ovbcopy(). 2003-04-04 12:12:34 +00:00
Jonathan Lemon
8c90439d70 Include correct opt_* headers for supported address families. Dike out
the unused ATM cases.

Sponsored by: DARPA, NAI Labs
2003-03-08 16:25:27 +00:00
Archie Cobbs
2b2a8188b1 Fix a use-after-free bug that could cause multi-link fragment reassembly to
fail for a long time (until the incoming sequence numbers wrapped around).

Reported by:	Matthew Impett <mimpett@Glue.umd.edu>
MFC after:	3 days
2003-03-05 23:12:59 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Hartmut Brandt
5dfe609dd1 Add two loader tuneables that allow one to change the maximum number of
queue items that can be allocated by netgraph and the number of free queue
items that are cached on a private list.

Netgraph places an upper limit on the number of queue items it may allocate.
When there is a large number of netgraph messages travelling through the
system (100k/sec and more) there is a high probability, that messages get
queued at the nodes and netgraph runs out of queue items. In this case the data
flow through netgraph gets blocked. The tuneable for the number of free
items lets one trade memory for performance.

The tunables are also available as read-only sysctls.

PR:		kern/47393
Reviewed by:	julian
Approved by:	jake (mentor)
2003-03-02 18:04:10 +00:00
Bill Paul
7dd982591b Some more updates for the new world order:
- Make transmission of packets work again. This stopped working because
  ether_ifattach() was forcing ifp->if_output to be ether_output() and
  clobbering our attempt to override this vector with a pointer to
  ng_fec_output(). Move the overriding of ifp->if_output to after
  ether_ifattach().

- Abandon the use of the netgraph ng_ether_input_p hook for snagging
  incoming frames, and instead override the ifp->if_input vector for
  interfaces that have been aggregated into our bundle. (I would have
  loved to have written things this way in the first place, but I
  didn't want to have to be the one to implement the if_input hook
  and change all the drivers.) This avoids collisions with the ng_ether
  module, which uses the same hook. Each aggregated device now calls
  ng_fec_input() directly, which then fakes up the rcvif pointer
  before invoking ifp->if_input itself.

This module should actually work now.
2003-02-26 19:49:32 +00:00
Bill Paul
0aef141cd0 Attempt to make the ng_fec module play nice with BPF again. Things have
changed since this code was written:

- The ng_ether_input_p hook only accepts two arguments now: the pointer
  to the ether header structure is gone.

- It's no longer necessary to cons up a fake ether header before passing
  incoming packets to BPF_MTAP().

ng_fec_input() has been modified to account for these two changes.
Running tcpdump on fec0 should work now.

PR:	kern/46720
2003-02-26 06:38:54 +00:00
Scott Long
7874f606d5 Introduce a new taskqueue that runs completely free of Giant, and in
turns runs its tasks free of Giant too.  It is intended that as drivers
become locked down, they will move out of the old, Giant-bound taskqueue
and into this new one.  The old taskqueue has been renamed to
taskqueue_swi_giant, and the new one keeps the name taskqueue_swi.
2003-02-26 03:15:42 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Doug Ambrisko
233896e9da Take the rc4 code out of ng_mppc module so we don't fail to load when
we have the rc4 code already in the kernel (via wlan stuff or awi).
Add a dependency on the rc4 module so if it doesn't exist then load it.

Reviewed by:	archie
2003-02-05 19:11:11 +00:00
Alfred Perlstein
04738e99b5 Catch more uses of MIN(). 2003-02-02 13:30:00 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Matthew Dillon
48e3128b34 Bow to the whining masses and change a union back into void *. Retain
removal of unnecessary casts and throw in some minor cleanups to see if
anyone complains, just for the hell of it.
2003-01-13 00:33:17 +00:00
Matthew Dillon
cd72f2180b Change struct file f_data to un_data, a union of the correct struct
pointer types, and remove a huge number of casts from code using it.

Change struct xfile xf_data to xun_data (ABI is still compatible).

If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary.  There are no operational changes in this
commit.
2003-01-12 01:37:13 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Julian Elischer
6282381da2 Make ng_fec.c compile again since Sam's changes.
Submitted by:	Hiten Pandya (hiten@unixdaemons.com)
2002-12-23 22:31:24 +00:00
Jeffrey Hsu
b30a244c34 SMP locking for ifnet list. 2002-12-22 05:35:03 +00:00
Bosko Milekic
86fea6be59 o Untangle the confusion with the malloc flags {M_WAITOK, M_NOWAIT} and
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
  bpf_alloc() and pass the 'canwait' flag(s) along.  It's been changed
  to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
  flag (and only one of those two).

Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)
2002-12-19 22:58:27 +00:00
Archie Cobbs
f3059f3906 Fix two bugs:
(a) Save control message return address only if NGM_MPPC_CONFIG_DECOMP
    (b) Properly count the number of required re-key operations
	when we loose synchronization and have to resync

MFC after:	3 days
2002-12-14 00:56:07 +00:00
Julian Elischer
f2ec255a33 fixes for this driver:
1) "ubt" driver did not work when system is booted with the device attached
2) missing "break;" in ubt_rcvmsg() function;

Submitted by: Maksim Yevmenkin <Maksim.Yevmenkin@cw.com>
Approved by: re (jhb)
2002-11-26 18:30:45 +00:00
Julian Elischer
878ed22696 The second try a committing the bluetooth code
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.

We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)

Not yet linked to the build

Submitted by:	Maksim Yevmenkin <myevmenk@exodus.net>
Approved by:	re
2002-11-20 23:01:59 +00:00
Sam Leffler
edbb5246ff o track changes to ethernet input packet handling
o track changes to bpf
o track changes to make ng hooks more private

Reviewed by:	many
Approved by:	re
2002-11-14 23:44:37 +00:00
John Baldwin
8214d60e20 Use intptr_t to fix various sizeof(int) != sizeof(void *) warnings. 2002-11-08 21:13:18 +00:00
John Baldwin
a2a6abd546 Use %z to print a size_t value. 2002-11-08 14:50:44 +00:00
Julian Elischer
b655e33d55 Slight redesign for fitting in with -current. 2002-11-05 01:08:11 +00:00
Julian Elischer
5968e29e00 The easy part of converting the ng_source node to -current.
More to come.. does not compile (deliberatly.. logic broken)
2002-11-02 02:29:43 +00:00
Julian Elischer
4b52f2836a Whitespace fixes 2002-11-02 01:26:28 +00:00
Julian Elischer
3a114c5de9 ifnet_addrs doesn;t exist any more so use
TAILQ_FIRST(&ifp->if_addrhead) to find the link layer ifaddr.
(it's always first I believe)
Allows this to compile on -current.
 .. need testers with FEC capable switches..
2002-11-01 23:09:15 +00:00
Julian Elischer
585ff168dc Add the netgraph 'source' module.
This is NOT YET CONVERTED TO -current.
This node is a source for preprogrammed packets at a known rate for testing.

I will convert it to -current "in place" but will MFC teh original
pre-conversion variant as that is  what is originally submitted.
Man page my me, info from Dave's README.

Submitted by:	Dave Chapeskie <dchapeskie@SANDVINE.com>
Obtained from:	Sandvine inc.
MFC after:	1 week
2002-10-31 23:03:09 +00:00
Julian Elischer
6da3d5ce7f Finally get around to committing Bill Paul's FEC netgraph nodes.
These are really only partly netgraph nodes as they do not use the
netgraph interfaces for many of the functions for which they could
be used, however they represent important functionality.

Submitted by:	wpaul
MFC after: 2 days
2002-10-29 19:12:44 +00:00
Brooks Davis
29e1b85f97 Use if_printf(ifp, "blah") instead of
printf("%s%d: blah", ifp->if_name, ifp->if_xname).
2002-10-21 02:51:56 +00:00
Alfred Perlstein
4f492bfab5 use __packed. 2002-09-23 18:54:32 +00:00
Benno Rice
fcfa0b48b3 Reference the socket we're accepting. 2002-09-14 08:56:10 +00:00
Archie Cobbs
cc78c48a68 Relax checking of incoming PPTP GRE packets a bit: ignore a bogus payload
length field when there's no payload indicated by the header 'S' bit.
This works around semi-brokenness in the Mac OS X PPTP client.
2002-09-14 00:00:49 +00:00
Benno Rice
a7d83226f0 Remember who asked for a connect or accept operation so we can actually tell
them when it's done.

Reviewed by:	archie
2002-09-11 00:52:50 +00:00
Archie Cobbs
facfd88935 Don't use "NULL" when "0" is really meant. 2002-08-22 00:30:03 +00:00
Archie Cobbs
901fadf792 New L2TP netgraph node type.
Obtained from:	Packet Design
2002-08-20 21:59:50 +00:00
Archie Cobbs
0157ee2275 When declaring local variables in macros, always use "_name" instead
of "name" to avoid ugly problems when the containing code already has
a variable named "name".
2002-08-20 18:57:11 +00:00
Maxime Henrion
f2b17113cf Make the consumers of the linker_load_file() function use
linker_load_module() instead.

This fixes a bug where the kernel was unable to properly locate and
load a kernel module in vfs_mount() (and probably in the netgraph
code as well since it was using the same function).  This is because
the linker_load_file() does not properly search the module path.

Problem found by:	peter
Reviewed by:		peter
Thanks to:		peter
2002-08-02 20:56:07 +00:00
Brian Somers
9e6798e7c0 NUL terminate the ACNAME passed to userland. 2002-06-22 21:00:53 +00:00
Julian Elischer
a835396035 A node that creates a device entry in /dev (yay devfs)
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...

Not fully tested (by me) yet.

Submitted by:	Mark Santcroos <marks@ripe.net>
MFC after:	3 weeks
2002-06-18 21:32:33 +00:00
Julian Elischer
ed2836692f if you have taken the mbuf out of the message object, then if you pass
the object to someone else, you need to put the mbuf back into it first..
2002-06-09 07:28:35 +00:00
Archie Cobbs
816b834f14 Const'ify variables to make it clear we're not writing to the mbuf data.
Reviewed by:	julian, brian
MFC after:	1 week
2002-06-05 23:35:31 +00:00