Commit Graph

46 Commits

Author SHA1 Message Date
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
479508cf28 Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``set {c,ip,l}cpretry'' and ``set {ch,p}apretry'' commands.

Change the non-convergence thresholds to 3 times the number of configured
REQ tries (rather than the previous fixed ``10'').  We now notice
repeated NAKs and REJs rather than just REQs.

Don't suggest that CHAP 0x05 isn't supported when it's not configured.

Fix some bugs that expose themselves with smaller numbers of retries:
o Handle instantaneous disconnects (set device /dev/null) correctly
  by stopping all fsm timers in fsm2initial.
o Don't forget to uu_unlock() devices that are files but are not
  ttys (set device /dev/zero).

Fix a *HORRENDOUS* bug in RFC1661 (already fixed for an Open event in state
``Closed''):
  According to the state transition table, a RCR+ or RCR- received in
  the ``Stopped'' state are supposed to InitRestartCounter, SendConfigReq
  and SendConfig{Ack,Nak}.  However, in ``Stopped'', we haven't yet
  done a TLS (or the last thing we did is a TLF).  We must therefore
  do the TLS at this point !

  This was never noticed before because LCP and CCP used not use
  LayerStart() for anything interesting, and IPCP tends to go into
  Stopped then get a Down because of an LCP RTR rather than getting a
  RCR again.
1999-02-26 21:28:14 +00:00
Brian Somers
5e31549897 Fully support both NT and LANMan CHAP type 0x80 as both
authenticator and authenticatee.
1999-02-18 00:52:15 +00:00
Brian Somers
92b0955883 o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
  ``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
  allow a fifth field for specifying auth/cbcp dialback
  parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
  rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.
1998-08-07 18:42:51 +00:00
Brian Somers
3a2e4f621c o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
  multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,
  despite the rfc state transition table.  This is clearly an
  error in the RFC as TLS cannot have yet been called (without
  TLF) in the ``Closed'' state.
  I've posted a message to comp.protocols.ppp for confirmation.
1998-06-27 23:48:54 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
6f38457323 o Create a new `timer'' log level. This lets us `set
log debug'' without filling our filesystem/screen with
  junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
  connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions.  If
  LayerUp() fails, the FSM does an immediate FsmDown() without
  calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
  chat programs so that our documented ability to communicate with
  /dev/tty via that descriptor works.  Also document it as
  descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
  This allows `struct datalink's to flatten themselves, pass
  through a pipe (read: the eye of a needle !) and come alive
  at the other end.  The donator then fork()s & exec()s pppmpipe,
  ``passing'' the connection to another ppp instance.

   *** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still.  It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....
1998-04-30 23:53:56 +00:00
Brian Somers
49052c9523 Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply
multilink ('cos I've seen my ISP REQ it without multilink).

Setting MRRU is ifdef'd out until it's debugged and we can
merge -direct links with other running programs.

Fix MTU setting.
1998-04-23 03:23:03 +00:00
Brian Somers
1342caed9c o Move the accept/deny/disable/enable globals either to the
bundle (non-negotiated vars) or to their respective IPCP,
  LCP or CCP.
o Enable rolling throughput statistics by default.
o Remove the `display' command.  These values now appear in
  `show bundle', `show ipcp', `show ccp' and `show lcp'.
o Initialise auth name & key at bundle create time (oops).
o Rename pppd-deflate (the id-24 hack) to deflate24.
o Don't send both a REJ and a NAK to an IPCP or LCP REQ.
  Favour the REJ (already done at the CCP level).
o Recurse in datalink_UpdateSet() when we change state, otherwise
  we end up setting no descriptors and getting jammed in the
  imminent select() instead of doing the dial/login/hangup.
o Display our CHAP encryption method despite being built with DES.
o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
a3e274968f int var : 1' -> unsigned var : 1'.
This made things look silly and made us mis-negotiate the
number of VJ slots.
1998-04-05 19:02:49 +00:00
Brian Somers
cd9647a100 o Move default MRU, MTU, ACCMAP and OPENMODE config values into
struct lcp and display them in `show lcp'.
o Remove `show mru' and `show mtu' and make the data part of
  `show lcp'.  Also merge `set m[tr]u' and `set openmode'
  implementations into the SetVariable function.
o `set timeout' only accepts the idle timer value as an argument.
o Move our lqr period into struct lcp, and create a `set lqrperiod'
  command.  Display it in `show lcp'.
o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP,
  CCP and IPCP levels, creating individual `set XXXretry' commands
  for each.  They must be separate because they have different
  context requirements in multilink mode.
o Display default config values in `show ccp'.
o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and
  explain the new commands.
1998-04-03 19:24:07 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Brian Somers
2267893f11 o Check the LCP Identifier field for correctness and drop
dodgy packets by default.
  The old behaviour is still available with ``disable idcheck''.
o Make all FSM diagnostics consistent and tidy up the way
  we build our LCP/CCP/IPCP requests.
o Don't assume sizeof(u_long) == 4.
1998-03-20 19:47:10 +00:00
Brian Somers
a611cad61d o Don't immediately reply to the first LQR thinking
it's a duplicate ('cos it compares with our initial
  values).
o Move the LCP into struct datalink.
1998-03-13 21:07:14 +00:00
Brian Somers
dc0fdb6bc1 "dial" now may optionally have context.
Tidy up some LcpInfo uses.
1998-03-13 00:44:51 +00:00
Brian Somers
6d6667755e Create struct fsm_parent. FSMs are created with one of these,
and the FSM passes subsequent events to them.

The datalink now hides its CCP from the bundle layer.
1998-02-27 01:22:39 +00:00
Brian Somers
503a7782d8 Shuffle around our FSMs a bit. This'll make it
easier to remove the CcpInfo, LcpInfo and IpcpInfo
globals.
1998-02-21 01:45:26 +00:00
Brian Somers
68f7a8cdcc Remove forgotten lcp report timer. 1998-02-19 19:56:39 +00:00
Brian Somers
81b6b8982d Merge LcpOpen functionality into datalink_LoginDone 1998-02-17 19:29:14 +00:00
Brian Somers
3006ec67fe Create struct datalink.
This is a type of physical link that can chat and talk
LCP & CCP.  A bundle contains a list of these (only one
in the list for the moment).

The datalink is a type of descriptor, and dials, enters
LCP (& does CCP), kicks the bundle when its FSMs do
something interesting and does the hangup chat script
on the way down.  It also handles redials and reconnects.

There are lots of loose ends, and probably lots of bugs,
but the data structures are getting there !
1998-02-16 00:01:12 +00:00
Brian Somers
aad81d1ecf Rename ccpstate to ccp, ipcpstate to ipcp and lcpstate to lcp. 1998-02-08 11:05:01 +00:00
Brian Somers
455aabc3f8 o Hook the FSMs into our bundle.
o The FSM layering is now more sane.
o Move a lot of the NCP stuff into our ipcpstate rather than having it
  in the bundle, including control of the configured IP addresses.  We
  don't need hacks like the global `linkup' variable any more as the
  FSM decides when our ppp.link* files get run.  This is going to eventually
  be configurable based on FSM events anyway.
o Fix a few inconsistencies when both sides require authentication.
o We now have "Ppp..." and "PPp" prompts, reflecting authentication
  and network phase.  We don't print loads of spurious prompts as we
  change phases any more.
o Our phase is part of the bundle now.
o Fix a bug where the FSM wasn't calling LayerFinish.
o Close the FSM down correctly with a signal rather than slamming it
  down as if the line was dropped (the undocumented ``down'' command
  is still available though).
o Remove the forgotten `tunno' variable and fix references to it.
1998-02-07 20:50:08 +00:00
Brian Somers
83d1af558c Isolate fsm callback functions
Derive {lcp,ipcp,ccp}state structures from struct fsm
where convenient.
Create bundle_Down() and remove LcpDown()
1998-02-06 02:24:29 +00:00
Brian Somers
7a6f872047 Create `struct bundle' - the top level control structure.
This structure will eventually contain a list of NCPs (currently
only IPCP is supported) and a list of physical `struct link's.
It will also derive from a struct link itself.
Make ModemTimeout() static - it's way to dangerous to be called
from outside !
Bump version to 1.9.  Our first MP release should be 2.0.
1998-02-02 19:32:16 +00:00
Brian Somers
7308ec6890 Move the global FSMs into their relevent structures.
IPCP, CCP and LCP are now just derived FSMs.
Comment each of the FSM implementations so that we can
tell what's going on.
Revise the state transitions so that CCP and IPCP actually
send terminate REQs when appropriate.

The OS & IPCP layers are still like spagetti (next job).
1998-01-31 02:48:30 +00:00
Brian Somers
c8ee0d78b6 o Bring global/static data into LcpInfo.
o Parameterise LcpReportTime().
o Don't obscure the hard-coded use of LcpInfo.
o Comment on the data elements of LcpInfo.
1998-01-30 01:33:46 +00:00
Brian Somers
63b7346316 Create a new MP branch for `multilink protocol'.
Do lots of initial shuffling and grouping.
Submitted by: Eivind Eklund <perhaps@yes.no>
1998-01-29 00:49:32 +00:00
cvs2svn
1ae349f52c This commit was manufactured by cvs2svn to create branch 'MP'. 1998-01-29 00:44:16 +00:00
Brian Somers
3a70c9f7bf Make things work when sizeof(long) != 32 (hopefully) 1998-01-11 17:50:49 +00:00
Brian Somers
0c9d3d050e Parenthesise the REJECTED macro. 1997-12-04 18:49:28 +00:00
Brian Somers
0053cc58a9 Abstract the CCP layer a level.
Add DEFLATE support.
1997-12-03 10:23:54 +00:00
Brian Somers
b6e82f33ef Fix prototypes.
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.

We can now survive a compile with
  -Wall -Wbad-function-cast -Wcast-align -Wcast-qual
  -Winline -Wmissing-declarations -Wmissing-prototypes
  -Wnested-externs -Wpointer-arith -Wredundant-decls
  -Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
1997-11-22 03:37:54 +00:00
Brian Somers
9e836af5d9 Update the cftypes arrays according to rfc1700.
Log IPCP reqests as IPCP.
1997-11-14 15:39:15 +00:00
Brian Somers
9780ef311d Don't pass global vars as args.
Remove local/global conflicts.
1997-11-08 00:28:11 +00:00
Brian Somers
6eaa6ac5d5 Cosmetic:
Move prototypes into the correct headers.
1997-10-26 12:42:13 +00:00
Brian Somers
75240ed178 Cosmetic (no functional changes):
o   Add missing $Id$s
o   Move extern decls from .c -> .h files
o   Staticize
o   Remove #includes from .h files
o   style(9)ify includes
o   bcopy -> memcpy
    bzero -> memset
    bcmp -> memcmp
    index -> strchr
    rindex -> strrchr
o   Move timeout.h -> timer.h (making it consistent w/ timer.c)
o   Add -Wmissing-prototypes
1997-10-26 01:04:02 +00:00
Brian Somers
944f709824 Make the code format more in line with style(9).
Update loadalias to use the new libalias api.
Update to version 1.1.
1997-08-25 00:29:32 +00:00
Brian Somers
927145be97 Overhaul ppp:
o Use syslog
  o Remove references to stdout/stderr (incl perror())
  o Introduce VarTerm - the interactive terminal or zero
  o Allow "set timeout" to affect current session
  o Change "set debug" to "set log"
  o Allow "set log [+|-]flag"
  o Make MSEXT and PASSWDAUTH stuff the default
  o Move all #ifdef DEBUG stuff into the code - this
    shouldn't be too much overhead.  It's now controlled
    with "set log +debug"
  o Add "set log command, debug, tun, warn, error, alert"
  o Remove cdefs.h, and assume an ansi compiler.
  o Improve all diagnostic output
  o Don't trap SIGSEGV
  o SIGHUP now terminates again (log files are controlled
    by syslog)
  o Call CloseModem() when changing devices
  o Fix parsing of third arg of "delete"

I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten.  It'll follow soon.
1997-06-09 03:27:43 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Atsushi Murai
b808c7565b Compile error occured by missing auth.h/cdefs.h
Reviewed by:	amurai@spec.co.jp
1995-02-27 03:18:28 +00:00
Jordan K. Hubbard
a860ee982e I assume someone had a good reason for breaking this? Try again!
For now, I'll content myself with fixing the tree.
1995-02-26 18:20:36 +00:00
Atsushi Murai
53c9f6c0c4 New user Process PPP based on iij-ppp0.94beta2.
o Supporting SYNC SIO device (But need a device driver)
     - add "set speed sync"
   o Fixing bug for Predictor-1 function.
   o Add new parameter that re-sent interval for set timeout commands.
   o Improving RTT (Round Trip Time) and reducing processor time.
     - Previous Timer service was using polling, and now using
       SIGALRM ;-)
     - A 0.94beta2 will not work correctly....

   -- Follows are additinal feature not including 0.94beta2
   o Support Proxy ARP
     - add "enable/disable proxy" commands
   o Marging common routine in CHAP/PAP.
   o Enhancing LCP/IPCP log information.
   o Support local Authfication connection on port 300x and tty.
     - You can set up pair of your "hostname -s" and
       password in ppp.secret. if either ppp.secret file nor
       your hostname line don't exist, It will notify a message
       and working as same as previous version.(Backword compatibility)
     - If you did set up them, It's allow connection but nothing to do
       except help and passwd command.
     - add "passwd yourpasswd" commands
   o Support afilter - keep Alive filter that a packet can send/receiving
     according to ifilter/ofilter but doesn't count it as preventing idle
     timer expires.
     - Same syntax of other filters.
   o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
1995-02-26 12:18:08 +00:00
Atsushi Murai
af57ed9fdc 1995-01-31 06:29:58 +00:00