Commit Graph

5993 Commits

Author SHA1 Message Date
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Peter Wemm
3bfdd012d8 Only call kvtop on non-null id_maddr's... 1999-04-26 12:49:39 +00:00
Peter Wemm
10cd8cf48b Register the netisr's via SYSINIT rather than linker sets. 1999-04-26 08:57:51 +00:00
Alan Cox
51bb7ba664 pmap_dispose_proc and pmap_copy_page:
Conditionally compile 386-specific code.

pmap_enter:
	Eliminate unnecessary TLB shootdowns.

pmap_zero_page and pmap_zero_page_area:
	Use invltlb_1pg instead of duplicating the code.
1999-04-25 18:40:05 +00:00
Poul-Henning Kamp
0bb2226a4d Make the machdep.i8254_freq and machdep.tsc_freq sysctls modify the
timecounter as well

Asked for by:	bde, jhay
1999-04-25 09:00:00 +00:00
Peter Wemm
19477ba0b7 The fd options changed during new-bus. 1999-04-24 21:46:56 +00:00
Peter Wemm
5895e3c8ee De-quote where possible and minor tweaks. depends on a current config(8). 1999-04-24 21:45:44 +00:00
Peter Wemm
061eb3abb3 Bump configvers; when the updates to generic/lint get committed, the old
config has severe indigestion.
1999-04-24 21:38:50 +00:00
Bill Fumerola
98e32b1820 Add $Id: $ 1999-04-24 20:26:12 +00:00
Peter Wemm
57a6bf02a3 #if 0 out the pci device list, not that you could do a lot with it. It
was only looking at old style drivers in the pcidevice_set, which doesn't
exist any more..  Ultimately, the pci and eisa bus drivers will check for
hints for wiring, flags and enable/disable etc as well.
1999-04-24 20:20:37 +00:00
Peter Wemm
96b3554e5c Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
KATO Takenori
424af31b45 Changed the type of id_port from short into int to avoid wrong
conversion from short to unsigned long which is an argument of
bus_alloc_resource.  Since the value -1 is used to indicate no port
reousece, id_port need to be signed (suggested by Doug Rabson and
Peter Wemm.)
1999-04-24 18:24:43 +00:00
Peter Wemm
ea7b76b16b Drop tty/net/bio/cam interrupt class labels, it's meaningless here now. 1999-04-24 16:07:51 +00:00
Peter Wemm
36d9945d74 Drop the tty/net/bio/cam interrupt class labels, they are meaninless here
now.
1999-04-24 16:04:16 +00:00
Peter Wemm
7e381ee0b4 Back out parts of rev 1.4; making isa.c preserve the hints across a
release made it unneeded.
1999-04-24 07:04:51 +00:00
Peter Wemm
8e51a153aa Revert part of 1.9; we don't need to reset the port after release now that
the isa bus doesn't clear the hints at that point.
1999-04-24 06:48:27 +00:00
Peter Wemm
d70a04d62d Don't clear the hints on release, just the resource containers. 1999-04-24 06:47:24 +00:00
Peter Wemm
0483b5b696 Typo, use SYS_RES_IRQ when releasing the irq resource, not SYS_RES_IOPORT. 1999-04-24 06:46:10 +00:00
KATO Takenori
2b2c7e7c09 - PC98 doesn't support 16bits bus I/F of adv deriver.
- PC98 has the bs driver.

Submitted by:	Takahashi Yoshihiro <nyan@dd.catv.ne.jp>
1999-04-24 04:21:42 +00:00
KATO Takenori
6e982e922a 1MB is not 1024 * 1024 * 1024 but 1024 * 1024. 1999-04-24 04:16:22 +00:00
Justin T. Gibbs
74ed7047aa staticize. 1999-04-23 23:29:23 +00:00
Justin T. Gibbs
6d6f090033 ahb.c:
Synchronize malloc types for our softc.

ahc_eisa.c:
	Sync to aic7xxx driver bus dma and new bus changes.
1999-04-23 23:29:00 +00:00
Peter Wemm
525a3d26e7 Make the register_intr() glue actually have a chance of working... 1999-04-23 21:01:19 +00:00
Dmitrij Tejblum
11a9f83f80 Make pmap_collect() an official pmap interface. 1999-04-23 20:29:58 +00:00
Dmitrij Tejblum
0666dbe1cf Moved cpu_set_fork_handler's prototype from <machine/cpu.h> to <sys/proc.h>.
Suggested by:	bde
1999-04-23 20:22:44 +00:00
Peter Wemm
6757ed7e26 Update VM86 comment - it's used for VESA too.
PR:		7976
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
1999-04-23 06:30:10 +00:00
John Polstra
607c815bef Update #include statements to reflect the new location of "sioreg.h".
With these changes plus the egcs fix I committed a few minutes ago,
"make -DWANT_AOUT world" works again.  Most likely, "make upgrade"
is fixed too, though I haven't tested that.
1999-04-22 21:02:44 +00:00
Peter Wemm
9d0e5f96b0 Return the port size from the probe.
"ppc0 at port 0x378 irq 7 drq 3 on isa0" becomes
"ppc0 at port 0x378-0x37f irq 7 drq 3 on isa0"
1999-04-22 13:10:43 +00:00
Warner Losh
bb31204c9b DEVICE_SUSPEND was always returning ENXIO for reasons unknown. For
now we noisily ignore this (and all errors).  DEVICE_SUSPEND should be
corrected, but I wanted to unbreak suspend until that happens.
1999-04-21 07:57:55 +00:00
Peter Wemm
8528f91719 oops, SMP was missing includes for a typedef. 1999-04-21 07:41:40 +00:00
Peter Wemm
54a8c69347 Stage 1 of a cleanup of the i386 interrupt registration mechanism.
Interrupts under the new scheme are managed by the i386 nexus with the
awareness of the resource manager.  There is further room for optimizing
the interfaces still.  All the users of register_intr()/intr_create()
should be gone, with the exception of pcic and i386/isa/clock.c.
1999-04-21 07:26:30 +00:00
Doug Rabson
c2974efdbe Make bt driver work on eisa again.
Submitted by: Matthew N. Dodd <winter@jurai.net>
1999-04-20 09:53:05 +00:00
Hellmuth Michaelis
00f8b3fd87 Make pcvt compile and run again after find_display() is gone as part of
the new-bus changes. Also fix several compiler warnings.
1999-04-20 08:45:27 +00:00
Peter Wemm
7ceeede80c Always reset the isa hints after releasing the resources after probe,
because the act of doing the release kills the hints(!).  A quirk of
the wrapper caused it to reset all the settings, except perhaps for the
memory address. I've tested this with a real SMC 8013EPC - which uses
shared memory addresses - it seems to work OK.
1999-04-19 20:31:53 +00:00
Peter Wemm
63cfedcc93 The missing prototype for isa_wrap_old_drivers() was bugging me.. 1999-04-19 20:16:22 +00:00
Peter Wemm
0f6dea5ce2 Make userconfig saving actually work.. 1999-04-19 19:40:58 +00:00
Alan Cox
270da41581 _pmap_unwire_pte_hold and pmap_remove_page:
Use pmap_TLB_invalidate instead of invltlb_1pg to eliminate
	unnecessary IPIs.

pmap_remove, pmap_protect and pmap_remove_pages:
	Use pmap_TLB_invalidate_all instead of invltlb to eliminate
	unnecessary IPIs.

pmap_copy:
	Use cpu_invltlb instead of invltlb when updating APTDpde.

pmap_changebit:
	Rather than deleting the unused "set bit" option (which may be
	useful later), make pmap_changebit an inline that is used
	by the new pmap_clearbit procedure.

Collectively, the first three changes reduce the number of TLB shootdown
IPIs by 1/3 for a kernel compile.
1999-04-19 18:45:21 +00:00
Luoqi Chen
8e9aec89b1 Fix a potential hang situation.
PR:		i386/2108
1999-04-19 18:44:16 +00:00
Peter Wemm
ee35d927c2 Don't do (1 << irq) to get an interrupt mask when irq = -1.
Submitted by:	Luoqi Chen <luoqi@watermarkgroup.com>
1999-04-19 18:03:51 +00:00
Peter Wemm
d95939af7a Zap LKM option and support. Farewell old friend. 1999-04-19 14:19:52 +00:00
Peter Wemm
db42d90829 unifdef -DVM_STACK - it's been on for a while for x86 and was checked
and appeared to be working for the Alpha some time ago.
1999-04-19 14:14:14 +00:00
Peter Wemm
5f5a2519b4 Fix a braino from last commit. 1999-04-19 14:01:42 +00:00
Peter Wemm
896de22812 GC some now unused (and #if 0) code. 1999-04-19 13:34:25 +00:00
Peter Wemm
f71c851c25 Drop the 'at nexus?' from the busses, it's not used.
Reactivate eisa0 and pnp0 in GENERIC, they work..  (eisa has been converted
but pnp still (for the most part) works the old way).
1999-04-19 11:53:36 +00:00
Brian Somers
23f7bd1706 Spelling police 1999-04-19 10:18:34 +00:00
Doug Rabson
343f195b0c Fix some confusion between physical and virtual addresses when recording
the driver's choice of memory window.
1999-04-19 08:42:39 +00:00
Peter Wemm
3c0d8bc982 Always create attach points for the various child busses that can be
attached to the nexus.  With one exception, this (for example) allows
you to do wierd things like kldload the eisa bus on the fly and then
drivers, and have it auto probe the eisa bus when the drivers come online.

The one exception being pci, it only adds the pcib after the presence of
the pci bus is detected and that's #if'ed code.

A side effect of this is that isa and eisa will be attached to the nexus
directly rather than the PCI->ISA or PCI->EISA bridges.  I'm not sure if
this is good or bad at this point, but it seems to be closer to the way
things are for the i386 family...  This is likely to be followed up.

This also fixes compilation without a PCI bus configured and will allow
eisa to work without PCI too.
1999-04-19 08:04:19 +00:00
Peter Wemm
e51d99dc81 EISA can (or will) be a child of the i386 nexus on non-PCI systems. 1999-04-19 07:58:34 +00:00
Peter Wemm
bed56f7f4d Set the bus description for EISA, like it is for ISA. 1999-04-19 06:57:33 +00:00
Warner Losh
da2d2676bb Set ifq_maxlen to eliminate "zp0 XXX: driver didn't set ifq_maxlen"
message on boot.

I know this driver is depricated, but I need to use it for a little
while.
1999-04-19 06:56:24 +00:00