Commit Graph

19 Commits

Author SHA1 Message Date
Lars Engels
6c1a5e837d - Add descriptions to most of the rc scripts. Those are mostly taken from their
daemon's manpage and probably improved.
- Consistently use "filesystem" not "file system".

Approved by:	bapt, brueffer
Differential Revision:	D452
2016-04-23 16:10:54 +00:00
Andriy Gapon
07dddf4e84 rc.d/power_profile: use recently added Cmax for cx_lowest
Trying to determine current lowest C-state after an AC event is racy
with C-states actually being changed by ACPI platform and kernel driver.

MFC after:	3 weeks
2012-09-11 06:25:10 +00:00
Kevin Lo
1424b561e1 Whitespace nit 2012-07-13 06:46:09 +00:00
Sean Bruno
55fb7f3673 Revert r238004 as more review has come in and there is now a discussion
on how to best proceed.
2012-07-02 17:55:29 +00:00
Sean Bruno
7402aad3c7 Cosmetic display change of Cx states via cx_supported sysctl entries.
Adjust power_profile script to handle the new world order as well.

Some vendors are opting out of a C2 state and only defining C1 & C3.  This
leads the acpi_cpu display to indicate that the machine supports C1 & C2
which is caused by the (mis)use of the index of the cx_state array as the
ACPI_STATE_CX value.

e.g. the code was pretending that cx_state[i] would
always convert to i by subtracting 1.

cx_state[2] == ACPI_STATE_C3
cx_state[1] == ACPI_STATE_C2
cx_state[0] == ACPI_STATE_C1

however, on certain machines this would lead to
cx_state[1] == ACPI_STATE_C3
cx_state[0] == ACPI_STATE_C1

This didn't break anything but led to a display of:
 * dev.cpu.0.cx_supported: C1/1 C2/96

Instead of
 * dev.cpu.0.cx_supported: C1/1 C3/96

MFC after:	2 weeks
2012-07-02 16:57:13 +00:00
Doug Barton
2b9851690c As previously discussed, add the svn:executable property to all scripts 2008-07-16 19:22:48 +00:00
Mike Makonnen
d9fcd86c3a The sysctl(8) program exits on some errors and only emits warnings on
others. In the case where it displayed warnings it would still return
succesfully. Modify it so that it returns the number of sysctls that
it was not able to set.

Make use of this in rc.d to display only *unsuccessfull* attempts to
set sysctls.
2008-06-23 22:06:28 +00:00
Doug Barton
d6128b96d7 Add an empty stop_cmd to the remaining scripts that don't start
daemons and don't already have one.
2007-12-08 23:00:28 +00:00
Dag-Erling Smørgrav
7bd5b79de4 Add a dummy script, FILESYSTEMS, which depends on root and mountcritlocal
and takes over mountcritlocal's role as the early / late divider.  This
makes it far easier to add rc scripts which need to run early, such as a
startup script for zfs, which is right around the corner.

This change should be a no-op; I have verified that the only change in
rcorder's output is the insertion of FILESYSTEMS immediately after
mountcritlocal.

MFC after:	3 weeks
2007-04-02 22:53:07 +00:00
Nate Lawson
907b6777c1 Re-work Cx handling to be per-cpu and asymmetrical, fixing support on
modern dual-core systems as well.

- Parse the _CST packages for each cpu and track all the states individually,
on a per-cpu basis.

- Revert to generic FADT/P_BLK based Cx control if the _CST package
is not present on all cpus. In that case, the new driver will
still support per-cpu Cx state handling. The driver will determine the
highest Cx level that can be supported by all the cpus and configure the
available Cx state based on that.

- Fixed the case where multiple cpus in the system share the same
registers for Cx state handling. To do that, added a new flag
parameter to the acpi_PkgGas and acpi_bus_alloc_gas functions that
enable the caller to add the RF_SHAREABLE flag.  This flag could also be
useful to other callers (acpi_throttle?) in the tree but this change is
not yet made.

- For Core Duo cpus, both cores seems to be taken out of C3 state when
any one of the cores need to transition out. This broke the short sleep
detection logic.  It is disabled now if there is more than one cpu in
the system for now as it fixed it in my case.  This quirk may need to
be re-enabled later differently.

- Added support to control cx_lowest on a per-cpu basis. There is still
a generic cx_lowest to enable changing cx_lowest for all cpus with a single
sysctl and for ease of use.  Sample output for the new sysctl:

dev.cpu.0.cx_supported: C1/1 C2/1 C3/57
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_usage: 0.00% 43.16% 56.83%
dev.cpu.1.cx_supported: C1/1 C2/1 C3/57
dev.cpu.1.cx_lowest: C3
dev.cpu.1.cx_usage: 0.00% 45.65% 54.34%
hw.acpi.cpu.cx_lowest: C3

This work was done by Stephane E. Potvin with some simple reworking by
myself.  Thank you.

Submitted by:	Stephane E. Potvin <sepotvin / videotron.ca>
MFC after:	2 weeks
2007-01-07 21:53:42 +00:00
Doug Barton
d6209fadb2 REQUIRE: syslogd and BEFORE: NETWORKING are now antithetical,
and including both in this file had nasty side effects on the
ordering of syslogd, as well as producing an error when running
rcorder. Remove the more bogus of the two options, which restores
proper ordering and removes the error.

There is an open question as to whether scripts with the nostart
KEYWORD should even have REQUIRE/BEFORE lines, and indeed, whether
they should be in /etc/rc.d at all, but that's for another time.
2005-12-21 01:19:20 +00:00
David E. O'Brien
aaacd70897 Embellish the dependency lists - this script depends having awk(1),
and it needs syslogd due to using logger(1).
Have it run as early as possible to save battery power for laptop users.
2005-07-22 00:57:04 +00:00
Nate Lawson
e7b3ae2b58 Add the ability to specify "NONE" if the user wants no change for the
given power profile.

MFC after:	1 day
2005-02-26 20:17:07 +00:00
Nate Lawson
4fbce3b11c Quiet error messages if the requested sysctls are not present.
MFC after:	1 day
2005-02-25 23:14:41 +00:00
Nate Lawson
7b708ac75b Add support for cpufreq to power_profile(8). Values for on/offline cpu
frequencies are specified with performance_cpu_freq and economy_cpu_freq.
Of course, special values LOW and HIGH are also supported.  Also, remove
old throttling support.
2005-02-06 21:12:25 +00:00
Mike Makonnen
337338ee00 Remove the requirement for the FreeBSD keyword as it no longer
makes any sense.

Discussed with: dougb, brooks
MFC after: 3 days
2004-10-07 13:55:26 +00:00
Nate Lawson
ccc09458fa Change hw.acpi.cpu.cx_lowest to accept values in the form of C1,
C2, ...  Update power_profile to use the new format.  Update the
man page to reflect this and give more info on Cx states.
2004-05-07 05:22:38 +00:00
Pawel Jakub Dawidek
bd57d5b0f5 Mark scripts as not usable inside a jail by adding keyword 'nojail'.
Some suggestions from:	rwatson, Ruben de Groot <mail25@bzerk.org>
2004-03-08 12:25:05 +00:00
Nate Lawson
3662033599 Add power_profile, a script that changes the ACPI CPU Cx idle state and/or
the throttling state in response to line transitions.  Future plans
include adding support for CPU frequency changes.

Add a devd.conf entry for calling this script.

The default values for this are:
performance_cx_lowest="HIGH"       # Use HLT (C0) online
performance_throttle_state="HIGH"  # 100% (no throttling)
economy_cx_lowest="LOW"            # Use the lowest Cx state possible
economy_throttle_state="HIGH"      # 100% (no throttling)
2003-12-18 04:39:57 +00:00