Commit Graph

37 Commits

Author SHA1 Message Date
Poul-Henning Kamp
d16c35256c Use generic tty code instead of local copies.
New devicename is ttyz{port}

No callout devices created.

Isn't this driver superseeded by uart(4) anyway ?
2004-10-12 22:33:19 +00:00
Poul-Henning Kamp
a45b36ad47 Use ttyalloc() instead of ttymalloc(NULL) 2004-09-17 07:28:07 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Poul-Henning Kamp
672c05d49c Preparation commit for the tty cleanups that will follow in the near
future:

rename ttyopen() -> tty_open() and ttyclose() -> tty_close().

We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
2004-07-15 20:47:41 +00:00
Marcel Moolenaar
d86bfb99a7 Update for the KDB framework:
o  Make debugging code conditional upon KDB instead of DDB.
o  Call kdb_alt_break() instead of db_alt_break().
2004-07-10 21:09:47 +00:00
Mark Peek
213fbd7666 Fix build: the return type for t_break changed from int to void. 2004-07-01 15:19:08 +00:00
Poul-Henning Kamp
89274131e2 Use generic modem control and BREAK ioctl handling. This eliminated
the need for a local ioctl handler.
2004-06-25 20:32:51 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Joerg Wunsch
a91a792fed Implement the BREAK_TO_DEBUGGER option for sab(4). 2004-06-08 11:58:34 +00:00
Poul-Henning Kamp
2140d01b27 Machine generated patch which changes linedisc calls from accessing
linesw[] directly to using the ttyld...() functions

The ttyld...() functions ar inline so there is no performance hit.
2004-06-04 16:02:56 +00:00
Poul-Henning Kamp
e451f9b758 Make the remaining serial drivers call ttyioctl() rather than calling
the linedisc directly.
2004-06-04 08:02:37 +00:00
Poul-Henning Kamp
186f2b9e04 Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
8e1f1df080 Device megapatch 3/6:
Add missing D_TTY flags to various drivers.

Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.

Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
2004-02-21 20:41:11 +00:00
Pawel Jakub Dawidek
e493da7e6f Fix wrong check.
Approved by:	jake, scottl (mentor)
2004-02-05 09:50:57 +00:00
Seigo Tanimura
512824f8f7 - Implement selwakeuppri() which allows raising the priority of a
thread being waken up.  The thread waken up can run at a priority as
  high as after tsleep().

- Replace selwakeup()s with selwakeuppri()s and pass appropriate
  priorities.

- Add cv_broadcastpri() which raises the priority of the broadcast
  threads.  Used by selwakeuppri() if collision occurs.

Not objected in:	-arch, -current
2003-11-09 09:17:26 +00:00
Poul-Henning Kamp
3f99f14bf1 OK, I messed up /dev/console with what I had hoped would be compat
code.  Convert remaining console drivers and hope for the best.
2003-09-26 19:35:50 +00:00
David E. O'Brien
945ff31afa Use __FBSDID().
Also some minor style cleanups.
2003-08-24 18:03:45 +00:00
Warner Losh
3d11ce04c6 s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev 2003-08-23 00:11:16 +00:00
Jake Burkholder
a11d7214fd Match "serial" as well as "se". 2003-03-31 18:21:52 +00:00
Poul-Henning Kamp
d42ee4e410 Note that MAJOR_AUTO is now the default if d_maj is not initialized. This
is more robust and prevents the hijacking of /dev/console for the typical
mistake.

Remove unneeded MAJOR_AUTO uses, it is only needed explicitly now if the
driver source has cross-branch compatibility to old releases.
2003-03-09 11:03:45 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Jake Burkholder
3fb37429df Use MAJOR_AUTO. GC statically assigned majors. 2003-02-28 04:21:13 +00:00
Poul-Henning Kamp
263444cfbf Change the console interface to pass a "struct consdev *" instead of a
dev_t to the method functions.

The dev_t can still be found at struct consdev *->cn_dev.

Add a void *cn_arg element to struct consdev which the drivers can use
for retrieving their softc.
2003-02-20 20:54:45 +00:00
Jake Burkholder
a68a96aad7 Add the sabtty children devices as unordered. Use the unit numbr of
the sabtty device to create its description so that they will be
unique for machines with multiple sab chips.

This fixes a panic on machines with an rsc card.

Tested by:	obrien (e250)
2003-01-27 18:39:09 +00:00
Jake Burkholder
6c5b0e25a0 Allow defaulting the console to ttya when it sets to screen and keyboard
in the prom but no keyboard is plugged in.
2003-01-26 01:56:20 +00:00
Jake Burkholder
a6517875d0 Use bus_space_subregion to add offsets to bus handles instead of doing
it manually.
2003-01-08 04:30:30 +00:00
Jake Burkholder
a720ae1bbe Sync with zs.
- Fix some bogosity with mixing unit numbers and channels, which would only
  work for one instance of the device.
- Use a simpler scheme for input and output queueing.
- Use db_alt_break.
2003-01-05 04:07:31 +00:00
Jake Burkholder
591871e5cb Fix compiling without DDB and ALT_BREAK_TO_DEBUGGER.
Submitted by:	marius@alchemy.franken.de
2002-12-30 18:18:22 +00:00
Jake Burkholder
e2815d20d9 Setup a default tty mode even if the device is not the console. Don't
reset the chip on open if we're not the console.

This fixes running a getty on ttya or ttyb if console input and output
devices are screen.
2002-11-18 05:56:43 +00:00
Jake Burkholder
4ce7e0f43a Remove some unnecessary code. Make the device description nicer. Add a
delay in the right place to flush output before switching consoles.
2002-11-18 04:02:42 +00:00
Jake Burkholder
810c82e6c2 - Add support for ALT_BREAK_TO_DEBUGGER; this is the only reliable way to
trigger a breakpoint with this chip.
- Fiddle the right bits in the cn input and output routines to disable port
  interrupts and enable visibility of the masked interrupt status bits.
- Register a shutdown final event handler to put the chip back in the mode
  that the prom expects.
2002-11-17 16:00:51 +00:00
Jake Burkholder
c0d676c068 Make this driver work a whole lot better.
- Get the initial mode from the prom settings and don't clobber the mode
  on open.
- Copy output into an internal ring buffer instead of accessing the tty
  outq directly in the interrupt handler.  This fixes a problem where
  garbage would show up in the output stream.
- Reset the console port completely and reprogram all the parameters
  before enabling it.  This fixes seemingly random hangs on startup
  when using a fast interrupt handler.
- Add minimal locking in place of spls.
- Remove dead code and minor cleanups.
2002-09-08 04:45:16 +00:00
Jake Burkholder
d5e6ffe8d2 Ported to FreeBSD. 2002-08-04 18:41:27 +00:00
Jake Burkholder
47029a19ea Add Jason L. Wright's driver for the SAB82532 serial chip, found in many
sun ultras.

Obtained from:	OpenBSD
2002-08-04 18:36:36 +00:00