Bugs in the Python code used to generate this vDSO caused us to
miscompute the register numbers/stack offsets at which addresses of the
system call output arguments were stored.
Together with some other patches, this vDSO allows us to make all of the
cloudlibc unit tests pass.
Obtained from: https://github.com/NuxiNL/cloudabi
In order to make CloudABI work on ARMv6, start off by copying over the
sysvec for ARM64 and adjust it to use 32-bit registers. Also add code
for fetching arguments from the stack if needed, as there are fewer
register than on ARM64.
Also import the vDSO that is needed to invoke system calls. This vDSO
uses the intra procedure call register (ip) to store the system call
number. This is a bit simpler than what native FreeBSD does, as FreeBSD
uses r7, while preserving the original r7 into ip.
This sysvec seems to be complete enough to start CloudABI processes.
These processes are capable of linking in the vDSO and are therefore
capable of executing (most?) system calls successfully. Unfortunately,
the biggest show stopper is still that TLS is completely broken:
- The linker used by CloudABI, LLD, still has troubles with some of the
relocations needed for TLS. See LLVM bug 30218 for more details.
- Whereas FreeBSD uses the tpidruro register for TLS, for CloudABI I
want to make use of tpidrurw, so that userspace can modify the base
address directly. This is needed for efficient emulation.
Unfortunately, this register doesn't seem to be preserved across
context switches yet.
Obtained from: https://github.com/NuxiNL/cloudabi (the vDSO)
While I'm here, add comment along the attach DEVMETHOD.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7874
* hard code a noise floor of -96 for now. The noise floor update code returns
some "interesting" values that I can't map to anything useful right now.
* Ensure a default noise floor is set - otherwise the initial scan results
have a noise floor of '0'.
* Fix up the RSSI calculation to be correctly relative to the noise floor.
The RSSI routines return an absolute value in dBm - so fix this up.
* Cap RSSI values appropriately.
* Ensure we pass in a 1/2 dB unit value in to net80211.
Tested:
* Intel 7260, STA mode
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 16.242414.0, address xx:xx:xx:xx:xx:xx
In r304870, refcount handling was lifted out into a common OTP/SPROM code
path, but the refcount assertions in chipc_disable_sprom_pins() were not
updated accordingly; this triggered an assertion on BCM4331 devices when
releasing a SPROM pin reservation.
Approved by: adrian (mentor, implicit)
- Use _Bool to not require userspace to include stdbool.h.
- Make extattr.h usable without vnode_if.h.
- Follow i_ump to get cdev pointer.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Remove redunand i_dev and i_fs pointers, which are available as
ip->i_ump->um_dev and ip->i_ump->um_fs, and reorder members by size to
reduce padding. To compensate added derefences, the most often i_ump
access to differentiate between UFS1 and UFS2 dinode layout is
removed, by addition of the new i_flag IN_UFS2. Overall, this
actually reduces the amount of memory dereferences.
On 64bit machine, original struct inode size is 176, reduced to 152
bytes with the change.
Tested by: pho (previous version)
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Make virtio_console(4) create `/dev/vtcon/<port_name>` alias pointing
to /dev/ttyVx.y upon receiving PORT_NAME (id = 7) event over the control
queue.
Approved by: trasz
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D7182
preserve the ABI and API for applications. It was removed in the port
to amd64, but was remained as garbage giving a micro-pessimization and
spurious single-step traps on i386.
pcb_psl was intended to be used just to do a context switch of PSL_I,
but this context switch was null in most or all versions, and
mis-switching of PSL_T was done instead.
Some history:
- in 386BSD-0.0, cpu_switch() ran at splhigh() and splhigh() did too
much interrupt disabling, so interrupts were hard-disabled across
cpu_switch() and too many other places
- in 386BSD-0.0-patchkit through FreeBSD-4 and FreeBSD-5 before
SMPng, splhigh() did soft interrupt masking, and cpu_switch() was
excessively cautious and did a cli at the start and a sti at the
end to hard-disable interrupts across the switch
- SMPng replaced the spl's and cli's by spinlocks (just sched_lock?),
so interrupts were hard-disabled across cpu_switch() and too many
other places again
- initial attempts to fix this intended to restore some soft
interrupt disabling, but to support variations in this cpu_switch()
used pushfl/popfl into pcb_psl to avoid hard-coding the assumption
that the initial and final states have PSL_I enabled. But the
version with soft interrupt disabling wasn't used for long, or was
never committed, (except I always used my different version of it
for UP) so the pushfl/popl and pcb_psl to hold them have been doing
less than nothing for about 14 years.
off single-stepping). Only do this on arches (only x86 so far)
which classify single-step traps unambiguously.
This allows other parts of the kernel to be intentionally and
unintentionally sloppy about generating single-step traps. On
x86, at least the following places were unintentionally sloppy:
- all operations that context-switched [er]flags. Especially
spinlock_enter()/exit() and cpu_switch(). When single-stepped,
saving the flags leaves PSL_T set in the saved flags, so
restoring gives a trap that is spurious if it occurs after
single-step mode has been left. Switching contexts away from
a low priority thread gives especially long-lived saved copies.
- the vm86 emulation allows user mode to set PSL_T. This was
correct until vm86 bios call mode was unintentionally given
access to kdb handling its single-step traps.
Now these places are intentionally sloppy, but unexpected
debugger traps still cause panics if no debugger that handles
the trap is attached when the trap is delivered.
IBSS negotiation is a subset of the STA/AP negotiation. We always have a
current channel, so base the HT capabilities on the current channel.
This is then put into IBSS probe requests to inform peers of our
11n capabilities.
When mlx5e_sq_xmit() returns an error code and the mbuf pointer is set,
we should not free the mbuf, because the caller will keep the mbuf in
the drbr. Make sure the mbuf pointer is correctly set upon function
exit.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The hardware MTU size can't be set to a value less than 1500 bytes due
to side-band management support. Allow setting the software MTU size
below 1500 bytes, thus creating a mismatch between hardware and
software MTU sizes.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Try to reuse code to setup sendqueues when possible by making some static
functions global. Further split the mlx5e_close_sq_wait() function to
separate out reusable parts.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change also reduces the size of the mlx5e_sq structure so that the last
queue_state element will fit into the previous cacheline and then the mlx5e_sq
structure becomes one cacheline less for amd64.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Make some functions and structures global to allow for code reuse
when creating rate limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Move setting of CQ moderation mode together with the other
CQ moderation parameters. Pass completion event vector as
a separate argument to mlx5e_open_cq(), because its value is
different for each call. Pass mlx5e_priv pointer instead of
mlx5e_channel pointer so that code can be used by rate
limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change allows for reusing the transmit path for so called
rate limited senqueues. While at it optimise some pointer lookups
in the fast path.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.
Sponsored by: Mellanox Technologies
MFC after: 1 week
i386-only section, and fix a comment about the amd64 kernel trapframe
not having stackregs.
tf_rsp doesn't need decoding on amd64, but had an old clone of i386
code to do this in 1 place, and since the amd64 kernel trapframe does
have stackregs, the result was an off-by-16 error for %rsp in an error
message.
current on first entry. This fixes a spurious "Stepping aborted"
message when the first entry is for a breakpoint.
Don't reset to the run mode to STEP_NONE when stopping, and remove
STEP_NONE. This mode was never really used, except transiently to
mis-decide whether to print the message on first entry.
While here, avoid using the old variable 'code' and remove it
in trap(). ('code' was meant for holding things like %dr6,
but is too small to hold %dr6 on amd64 and was reduced to an
obfuscation of tf_err, with early truncation on amd64.)
Submitted by: Michael Butler (imb@...)
The fill pattern was previously an ia64 instruction sequence. Presumably
ia64's linker script was copied as a starting point.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
come up as 't6nex' nexus devices with 'cc' ports hanging off them.
The T6 firmware and configuration files will be added as soon as they
are released. For now the driver will try to work with whatever
firmware and configuration is on the card's flash.
Sponsored by: Chelsio Communications
Add IEEE80211_KEY_SWCRYPT / IEEE80211_KEY_SWMIC bits to the
IEEE80211_KEY_DEVICE mask - as a result, those bits will be preserved
during group key handshake.
A driver can override them in iv_key_alloc() for some keys in case
when hardware crypto support is not possible. As an example:
- multi-vap without multicast key search support;
- IBSS RSN for devices w/ fixed storage for group keys;
Tested with RTL8188EU (AP, sw crypto) and
RTL8821AU (STA, sw crypto for group keys + hw crypto for pairwise keys)
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D7901
Move to a per-proc TLS offset rather than incorrectly keying off the
presense of freebsd32 compability in the kernel.
Reviewed by: adrian, sbruno
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7843
This is not very easy to do, since ddb didn't know when traps are
for single-stepping. It more or less assumed that traps are either
breakpoints or single-step, but even for x86 this became inadequate
with the release of the i386 in ~1986, and FreeBSD passes it other
trap types for NMIs and panics.
On x86, teach ddb when a trap is for single stepping using the %dr6
register. Unknown traps are now treated almost the same as breakpoints
instead of as the same as single-steps. Previously, the classification
of breakpoints was almost correct and everything else was unknown so
had to be treated as a single-step. Now the classification of single-
steps is precise, the classification of breakpoints is almost correct
(as before) and everything else is unknown and treated like a
breakpoint.
This fixes:
- breakpoints not set by ddb, including the main one in kdb_enter(),
were treated as single-steps and not stopped on when stepping
(except for the usual, simple case of a step with residual count 1).
As special cases, kdb_enter() didn't stop for fatal traps or panics
- similarly for "hardware breakpoints".
Use a new MD macro IS_SSTEP_TRAP(type, code) to code to classify
single-steps. This is excessively complicated for bug-for-bug and
backwards compatibilty. Design errors apparently started in Mach
in ~1990 or perhaps in the FreeBSD interface in ~1993. Common trap
types like single steps should have a unique MI code (like the TRAP*
codes for user SIGTRAP) so that debuggers don't need macros like
IS_SSTEP_TRAP() to decode them. But 'type' is actually an ambiguous
MD trap number, and code was always 0 (now it is (int)%dr6 on x86).
So it was impossible to determine the trap type from the args.
Global variables had to be used.
There is already a classification macro db_pc_is_single_step(), but
this just gets in the way. It is only used to recover from bugs in
IS_BREAKPOINT_TRAP(). On some arches, IS_BREAKPOINT_TRAP() just
duplicates the ambiguity in 'type' and misclassifies single-steps as
breakpoints. It defaults to 'false', which is the opposite of what is
needed for bug-for-bug compatibility.
When this is cleaned up, MI classification bits should be passed in
'code'. This could be done now for positive-logic bits, since 'code'
was always 0, but some negative logic is needed for compatibility so
a simple MI classificition is not usable yet.
After reading %dr6, clear the single-step bit in it so that the type
of the next debugger trap can be decoded. This is a little
ddb-specific. ddb doesn't understand the need to clear this bit and
doing it before calling kdb is easiest. gdb would need to reverse
this to support hardware breakpoints, but it just doesn't support
them now since gdbstub doesn't support %dr*.
Fix a bug involving %dr6: when emulating a single-step trap for vm86,
set the bit for it in %dr6. Userland debuggers need this. ddb now
needs this for vm86 bios calls. The bit gets copied to 'code' then
cleared again.
Fix related style bugs:
- when clearing bits for hardware breakpoints in %dr6, spell the mask
as ~0xf on both amd64 and i386 to get the correct number of bits
using sign extension and not need a comment about using the wrong
mask on amd64 (amd64 traps for invalid results but clearing the
reserved top bits didn't trap since they are 0).
- rewrite my old wrong comments about using %dr6 for ddb watchpoints.
The 'cpu' and 'cpu_class' variables were always set to the same value
on amd64 and are legacy holdovers from i386. Remove them entirely on
amd64.
Reviewed by: imp, kib (older version)
Differential Revision: https://reviews.freebsd.org/D7888
* TCP_KEEPINIT
* TCP_KEEPINTVL
* TCP_KEEPIDLE
* TCP_KEEPCNT
always always report the values currently used when getsockopt()
is used. This wasn't the case when the sysctl-inherited default
values where used.
Ensure that the IPPROTO_TCP level socket option TCP_INFO has the
TCPI_OPT_ECN flag set in the tcpi_options field when ECN support
has been negotiated successfully.
Reviewed by: rrs, jtl, hiren
MFC after: 1 month
Differential Revision: 7833
SEL_UPL and sometimes PSL_VM. This is just a style change on amd64,
but on i386 it fixes 1 unimportant place where the PSL_VM check was
missing and starts fixing 1 important place where the PSL_VM check
had a logic error.
Fix logic errors in treating vm86 bioscall mode as kernel mode. The
main place checked all the necessary flags, but put the necessary
parentheses for the PSL_VM and PCB_VM86CALL checks in the wrong
place. The broken case is only reached if a vm86 bioscall uses a
%cs which is nonzero mod 4, but that is unusual -- most bios calls
start with %cs = 0xc000 or 0xf000 and rarely change it. Another
place was missing the check for PCB_VM86CALL, but was only reachable
if there are bugs virtualizing PSL_I.
Add a macro TF_HAS_STACKREGS() and use this instead of converting
open-coded checks of SEL_UPL, etc. to TRAPF_USERMODE() when we only
care about whether the frame has stack registers. This fixes 3
places in my recent fix for register variables in vm86 mode where I
messed up the PSL_VM check and cleans up other places.
mutexes or using any callouts when active.
Trying to lock a mutex when KDB is active or the scheduler is stopped
can result in infinite wait loops. The same goes for calling callout
related functions which in turn lock mutexes.
If the USB controller at which a USB keyboard is connected is idle
when KDB is entered, polling the USB keyboard via USB will always
succeed. Else polling may fail depending on which state the USB
subsystem and USB interrupt handler is in. This is unavoidable unless
KDB can wait for USB interrupt threads to complete before stalling the
CPU(s).
Tested by: Bruce Evans <bde@freebsd.org>
MFC after: 4 weeks
- ifnet.if_mtu does not require explicit setting.
- ifnet.if_hdrlen must be set after ether_ifattach().
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7873
It is available on both stable/10 and stable/11. This eases future MFCs
to stable/10.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7872
This paves the way for the dynamic RSS key and indirect table setting.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7864
- Add few checks for group/pairwise ciphers into
ieee80211_parse_{wpa,rsn}().
- Split error code and cipher value in wpa_cipher() / rsn_cipher(); current
hack with (1 << 32) does not work - it's 1, not 0 (detected by CSA).
- Return IEEE80211_REASON_UNSUPP_RSN_IE_VERSION instead of
IEEE80211_REASON_IE_INVALID when version field is not equal to RSN_VERSION.
Tested with wpi(4) / urtwn(4) (HOSTAP mode).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D7887
We have 6 opcode rewriters for table opcodes. When `set swap' command
invoked, it is called for each rewriter, so at the end we get the same
result, because opcode rewriter uses ETLV type to match opcode. And all
tables opcodes have the same ETLV type. To solve this problem, use
separate sets handler for one opcode rewriter. Use it to handle TEST_ALL,
SWAP_ALL and MOVE_ALL commands.
PR: 212630
MFC after: 1 week
As this is evaluation hardware with only a few users, and there is a lack
of information add a warning when booting on this hardware.
Reported by: cognet
Obtained from: ABT Systems Ltd
MFC after: Instant
Sponsored by: The FreeBSD Foundation
This paves the way for further attach/detach code reorganization.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7858
In case if there is already running interface, a second non-sta
interface will omit scanning, going directly to RUN state. Handle
this case for adhoc mode appropriately.
Tested with RTL8821AU, 2 vaps in IBSS mode.
In particular, reset the DF_QUIET flag when detaching from a device so
that a driver that marks a device quiet doesn't dictate policy for a
different driver that may claim the device in the future.
Reviewed by: rpokala, wblock
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7803
- Certain pic_assign_cpu, e.g. msi_assign_cpu can have quite a long
call chain. For msi_assign_cpu, mutex makes complex PCI bridge
drivers more tricky, e.g. sleep can note be called, etc, it will
be pretty tricky for upcoming Hyper-V PCI bridge driver for PCI
pass-through.
- It is not used on any hot code path nor non-sleepable context, so
sx should have the same effect as mutex.
PIC list is still protected by mutex to keep suspend/resume work.
Discussed with: jhb
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7784
* Don't do RTS/CTS - experiments show that we get ACK frames for each of them
and this ends up causing the timestamps to look all funny.
* Set the HAL_TXDESC_POS bit, so the AR9300 HAL sets up the hardware to return
location and CSI information.
- evdev_set_methods call is not required if actual methods are no-ops
- evdev_set_serial is also optional if there is no meaningful input device
identifier
- evdev_set_id on the other hand is mandatory, so set virtual bus with
dummy vendor/product/version
Suggested by: Vladimir Kondratiev
