1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
of the version map just exported all the symbols, which caused a
binutils bug being triggered when ld fails to link two objects, one
of which exports a versioned version of the symbol, and another --
unversioned. [1]
- Also add version map for libkafs5.
Submitted by: jchandra@ (based on)
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
kerberos libraries were not linked properly (missing dependencies),
which causes 3rd party applications linking to fail when --as-needed
ld flag is used. I also added the --no-undefined ld(1) flag to make
sure that there're no missing dependencies.
MFC after: 3 days
This change was erronously ommitted from the r185690, and attempt
to simply add the prototype to string.h has revealed that several
contributed programs defined local prototypes for strndup(), controlled
by autoconfed config.h. So, manually change #undef HAVE_STRNDUP to
#define HAVE_STRNDUP 1. Next import of the corresponding program would
regenerate config.h, overriding the changes in this commit.
No objections from: kan
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.
Sponsored by: Isilon Systems
Reviewed by: alfred
libraries had not had their versions bumped relative to 6.3-REL but
had indeed been changed. We need to bump their version so they can be
properly added to the compat6x port:
libasn1.so.8 libgssapi.so.8 libhdb.so.8 libkadm5clnt.so.8
libkadm5srv.so.8 libkafs5.so.8 libkrb5.so.8 libobjc.so.2
MFC After: 1 day
In the Heimdal distro, only kerberized telnet refers to INET6,
but we don't build it, we use contrib/telnet linked with the
Kerberos libs instead.
Tested with: cmp(1)
similar the the Solaris implementation. Repackage the krb5 GSS mechanism
as a plugin library for the new implementation. This also includes a
comprehensive set of manpages for the GSS-API functions with text mostly
taken from the RFC.
Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
causes them to be recreated (if needed) early, when doing "make
depend" here, before generating headers that depend on them.
This should fix breakages often seen while doing incremental
(NO_CLEAN) cross-builds.
branches but missed HEAD. This patch extends his a little bit,
setting it up via the Makefiles so that adding _FREEFALL_CONFIG
to /etc/make.conf is the only thing needed to cluster-ize things
(current setup also requires overriding CFLAGS).
From Peter's commit to the RELENG_* branches:
> Add the freebsd.org custer's source modifications under #ifdefs to aid
> keeping things in sync. For ksu:
> * install suid-root by default
> * don't fall back to asking for a unix password (ie: be pure kerberos)
> * allow custom user instances for things like www and not just root
The Makefile tweaks will be MFC-ed, the rest is already done.
MFC after: 3 days
Approved by: re (dwhite)
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
works before bsd.dep.mk,v 1.44, whether .depend file exists or not,
but the contents of .depend file is wrong. With bsd.dep.mk,v 1.44,
the contents of .depend file is always broken, and build without a
.depend file is broken too. With this change it works reliably in
all cases. Ugh.
- Dropped support for standalone builds, this was only partially
supported anyway, and required so much magic in makefiles that
made life dangerous (e.g., by using the custom yacc rules).
- Got rid of .OBJDIR in makefiles -- makes building of individual
files possible again.
- Made the .x.c transformations -j safe.
- Reprogrammed LDADD to fix static build of some utilities that
was broken.
- Fixed LDFLAGS and DPADD in the WITH_OPENLDAP case -- positively
affects the contents of .depend files.
- Removed redundant .h's from SRCS, only kept those that are
generated.
- libkrb5/ INCS were bogusly installed again with libgssapi/.
- Made build-tools real tools with their own makefiles in
separate directories. This allows us to properly track
their dependencies, etc.
- Faster build, 21% less of makefile code!
Approved by: nectar
Reviewed by: markm
Silence on: arch
(`WITH_OPENLDAP'). Previously, the KDC could fail to start if it was
invoked before `ldconfig'.
This solution was chosen rather than adding an `ldconfig' dependency
to `kerberos' in rcNG, because it is more robust and there is no
guarantee that the LDAP libraries will be in ldconfig's path anyway.
Problem reported by: Sean McNeil <sean@mcneil.com>
looking ${.OBJDIR} work that has the up-side of actually working
in upgrade and make -jN cases.
This needs to be revisited further, and it is conceivable that
the ${.OBJDIR} stuff can be simplified, but the sheer number of
edge cases and other causes make this Hard(tm). For now, this works.
looking ${.OBJDIR} work that has the up-side of actually working
in upgrade and make -jN cases.
This needs to be revisited further, and it is conceivable that
the ${.OBJDIR} stuff can be simplified, but the sheer number of
edge cases and other causes make this Hard(tm). For now, this works.
Previously, there were two copies of telnet; a non-crypto version
that lived in the usual places, and a crypto version that lived in
crypto/telnet/. The latter was built in a broken manner somewhat akin
to other "contribified" sources. This meant that there were 4 telnets
competing with each other at build time - KerberosIV, Kerberos5,
plain-old-secure and base. KerberosIV is no longer in the running, but
the other three took it in turns to jump all over each other during a
"make buildworld".
As the crypto issue has been clarified, and crypto _calls_ are not
a problem, crypto/telnet has been repo-copied to contrib/telnet,
and with this commit, all telnets are now "contribified". The contrib
path was chosen to not destroy history in the repository, and differs
from other contrib/ entries in that it may be worked on as "normal"
BSD code. There is no dangerous crypto in these sources, only a
very weak system less strong than enigma(1).
Kerberos5 telnet and Secure telnet are now selected by using the usual
macros in /etc/make.conf, and the build process is unsurprising and
less treacherous.
Tests with openldap20 where successful whereas openldap21 didn't like
the way hdb-ldap accessed openldap (doesn't like non-bind access).
To activate the support put a USE_OPENLDAP=yes in your make.conf.
The OPENLDAPBASE is also optional and points to /usr/local as default.
Approved by: markm
MFC after: 2 weeks
FreeBSD. This method attempts to centralize all the necessary hacks
or work arounds in one of two places in the tree (src/Makefile.inc1
and src/tools/build). We build a small compatibility library
(libbuild.a) as well as selectively installing necessary include
files. We then include this directory when building host binaries.
This removes all the past release compatibilty hacks from various
places in the tree. We still build on tip of stable and current. I
will work with those that want to support more, although I anticipate
it will just work.
Many thanks to ru@, obrien@ and jhb@ for providing valuable input at
various stage of implementation, as well as for working together to
positively effect a change for the better.
making sure the copies in the object tree are writable. When files
in the source tree are not writable (as would be the case for a p4
tree) then a buildworld -DNOCLEAN will try to copy over the existing
non-writable headers. This fails. Instead we cat the headers with
redirection. This is just one of the possibilities.
were being linked against the client Kerberos administration library,
when they must be linked against the server library, resulting in
segfaults early in the game. I suspect these have never been tested
before :-(
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
(make-roken is a build tool). This bug was hiding itself after
a just fixed bug in cross-linker (binutuils/ld/Makefile,v 1.20).
The bug was fatal for cross builds; for example, an alpha binary
(make-roken) was attempted to be run on i386.
Added make-roken to the list of build-tools in libasn1. It only
worked because another build tool needs make-roken implicitly:
(build-tools: asn1_compile: print_version.o: roken.h: make-roken).
Spotted by: nectar
