The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
By using DWC TRM terminology, normal descriptor format should be named
extended and alternate descriptor format should be named normal.
Should not been functional change.
MFC after: 4 weeks
A later change, currently being iterated on in D24459, will in-fact change
the lock type to an sx so that TTY drivers can sleep on it if they need to.
Committing this ahead of time to make the review in question a little more
palatable.
tty_lock_assert() is unfortunately still needed for now in two places to
make sure that the tty lock has not been recursed upon, for those scenarios
where it's supplied by the TTY driver and possibly a mutex that is allowed
to recurse.
Suggested by: markj
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in
drivers when the driver doesn't support a particular command. Do a
sweep and fix that.
Reported by: imp
supposedly may call into ether_input() without network epoch.
They all need to be reviewed before 13.0-RELEASE. Some may need
be fixed. The flag is not planned to be used in the kernel for
a long time.
Terasic DE10-Pro (an Intel Stratix 10 GX/SX FPGA Development Kit).
The Altera EMAC is an instance of Synopsys DesignWare Gigabit MAC.
This driver sets correct clock range for MDIO interface on Intel Stratix 10
platform.
This is required due to lack of support for clock manager device for
this platform that could tell us the clock frequency value for ethernet
clock domain.
Sponsored by: DARPA, AFRL
o Add an experimental IOMMU support to xDMA framework
The BERI IOMMU device is the part of CHERI device-model project [1]. It
translates memory addresses for various BERI peripherals modelled in
software. It accepts FreeBSD/mips64 page directories format and manages
BERI TLB.
1. https://github.com/CTSRD-CHERI/device-model
Sponsored by: DARPA, AFRL
XCHAN_CAP_BOUNCE.
The only application that uses bounce buffering for now is the Government
Furnished Equipment (GFE) P2's dma core (AXIDMA) with its own dedicated
cacheless bounce buffer.
Sponsored by: DARPA, AFRL
The format to use depends on hardware configuration (synthesis-time),
so make it compile-time kernel option.
Extended format allows DMA engine to operate with 64-bit memory addresses.
Sponsored by: DARPA, AFRL
so it does not require a bounce buffer. The only need for this was
to align the buffer address. Implement unaligned access and we don't
need to copy data twice.
o Remove contigmalloc-based bounce buffer from xDMA code since it is
not suitable for arbitrary memory provided by platform, which is
sometimes a dedicated piece of memory that is not managed by OS at all.
Sponsored by: DARPA, AFRL
xdma(4) interface.
This allows us to switch between Altera mSGDMA or SoftDMA engines used by
atse(4) device.
This also makes atse(4) driver become 25% smaller.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9618
SoftDMA is a software implementation of DMA engine built using Altera
FIFO component.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9620
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
driver to support exposing a GEOM device, which can be used to mount
Avalon-attached ROMs, reserved areas of DRAM, etc, as a filesystem:
commit 9deb1e60ea
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sat Mar 5 20:33:12 2016 +0000
Use format strings with make_dev(9) in avgen(4).
commit 0bf2176c23
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Tue Mar 1 10:23:23 2016 +0000
Implement a new "geomio" configuration argument to altera_avgen(4),
the generic I/O device we attach to various BERI peripherals. The new
option requests that, instead of exposing the underlying device via a
special device node in /dev, it instead be exposed via geom(4),
allowing it to be used with filesystems. The current implementation
does not allow a device to be exposed both for file/mmap and geom, so
one of the two models must be selected when configuring it via FDT or
device.hints. A typical use of the new option will be:
sri-cambridge,geomio = "rw";
MFC after: 1 week
Sponsored by: DARPA, AFRL
CheriBSD, which attempt to work around an inherent race in the UART's
control-register design in detecting whether JTAG is currently,
present, which will otherwise lead to moderately frequent output
drops when running in polled rather than interrupt-driven operation.
Now, these drops are quite infrequent.
commit 9f33fddac9
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Thu Jul 16 17:34:12 2015 +0000
Add a new sysctl, hw.altera_jtag_uart.ac_poll_delay, which allows the
(default 10ms) delay associated with a full JTAG UART buffer combined
with a lack of a JTAG-present flag to be tuned. Setting this higher
may cause some JTAG configurations to be more reliable when printing
out low-level console output at a speed greater than the JTAG UART is
willing to carry data. Or it may not.
commit 73992ef760
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sun Jan 1 15:13:07 2017 +0000
Minor improvements to the Altera JTAG UART device driver:
- Minor rework to the logic to detect JTAG presence in order to be a bit
more resilient to inevitable races: increase the retry period from two
seconds to four seconds for trying to find JTAG, and more agressively
clear the miss counter if JTAG has been reconnected. Once JTAG has
vanished, stop prodding the miss counter.
- Do a bit of reworking of the output code to frob the control register
less by checking whether write interrupts are enabled/disabled before
changing their state. This should reduce the opportunity for races
with JTAG discovery (which are inherent to the Altera
hardware-software interface, but can at least be minimised).
- Add statistics relating to interrupt enable/disable/JTAG
discovery/etc.
With these changes, polled-mode JTAG UART ttys appear substantially
more robust.
MFC after: 1 week
Sponsored by: DARPA, AFRL
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.
Discussed in: freebsd-current
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
commit d0c7d235c0
Make the Altera JTAG UART device driver slightly more forgiving of
the foibles of a sub-par hrdware interface by increasing the timeout
for spotting JTAG polling from one to two seconds.
commit 19ed45a188
Update comment.
commit 8edfe803f0
Add a comment about a device-driver race condition that could cause the BERI
pipeline to wedge awaiting JTAG in the event that both the low-level console
and the tty layer decide to write to the JTAG FIFO just before JTAG is
disconnected. Resolving this race is a bit tricky as it looks like there
isn't a way to 'give the character back' to the tty layer when we discover
the race. The easy fix is to drop the character, which we don't yet do, but
perhaps should as that is a better outcome than wedging the pipeline.
commit 2ea26cf579
Add a comment about an inherent race with hardware in the Altera JTAG
UART's low-level console code.
Submitted by: rwatson
MFC after: 1 week
Sponsored by: DARPA, AFRL
commit 8bd88585ed
Rework atse_rx_cycles handling: count packets instead of fills, and use the
limit only when polling, not when in interrupt mode. Otherwise, we may
stop reading the FIFO midpacket and clear the event mask even though the
FIFO still has data to read, which could stall receive when a large packet
arrives. Add a comment about races in the Altera FIFO interface: we may
need to do a little more work to handle races than we are.
commit 20b39086cc
Use 'sizeof(data)' rather than '4' when checking an mbuf bound, as is the
case for adjusting length/etc.
commit e18953174a
Break out atse_intr() into two separate routines, one for each of the two
interrupt sources: receive and transmit.
commit 6deedb4324
For the RX interrupt, take interest only in ALMOSTEMPTY and OVERFLOW.
For the TX interrupt, take interest only in ALMOSTFULL and UNDERFLOW.
Perform TX atse_start_locked() once rather than twice in TX interrupt
handling -- and only if !FULL, rather than unconditionally.
commit 12601972ba
Experimentation suggests that the Altera Triple-Speed Ethernet documentation
is incorrect and bits in the event and interrupt-enable registers are not
irrationally rearranged relative to the status register.
commit 3cff2ffad7
Substantially rework interrupt handling in the atse(4) driver:
- Introduce a new macro ATSE_TX_PENDING() which checks whether there is
any pending data to transmit, either in an in-progress packet or in
the TX queue.
- Introduce new ATSE_RX_STATUS_READ() and ATSE_TX_STAUTS_WRITE() macros
that query the FIFO status registers rather than event registers,
offering level- rather than edge-triggered FIFO conditions.
- For RX, interrupt only on full/overflow/underflow; for TX, interrupt
only on empty/overflow/underflow.
- Add new ATSE_RX_INTR_READ() and ATSE_RX_INTR_WRITE() macros useful for
debugging interrupt behaviour.
- Add a debug.atse_intr_debug_enable sysctl that causes various pieces
of FIFO state to be printed out on each RX or TX interrupt. This is
disabled by default but good to turn on if the interface appears to
wedge. Also print debugging information when polling.
- In the watchdog handler, do receive, not just transmit, processing, to
ensure that the rx, not just tx, queue is being handled -- and, in
particular, will be drained such that interrupts can resume.
- Rework both atse_rx_intr() and atse_tx_intr() to eliminate many race
conditions, and add comments on why various things are in various
orders. Interactions between modifications to the event and interrupt
masks are quite subtle indeed, and we must actively check for a number
of races (e.g., event mask cleared; packet arrives; interrupts enabled).
We also now use the status registers rather than event registers for
FIFO status checks to avoid other races; we continue to use event
registers for underflow/overflow.
With this change, interrupt-driven operation of atse appears (for the
time being) robust.
commit 3393bbff5c
atse: Fix build after 3cff2ffa
Obtained from: cheribsd
Submitted by: rwatson, emaste
Sponsored by: DARPA/AFRL
MFC after: 3 days
to check the status property in their probe routines.
Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352. Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.
Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
221804, 221805, 222004, 222006, 222055, 222820, 1135077, 1135118, 1136259
Add atse(4), a driver for the Altera Triple Speed Ethernet MegaCore.
The current driver support gigabit Ethernet speeds only and works with
the MegaCore only in the internal FIFO configuration in the soon to be
open sourced BERI CPU configuration.
Submitted by: bz
MFC after: 3 days
Sponsored by: DARPA/AFRL