The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
of psm(4), ums(4) and sysmouse(4) drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
MFC after: 2 weeks
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
The console escape code standard (ECMA-48) specifies color #3 (escape
code 33) as yellow. A brown console color is an artifact of the VGA
palette, which replaces dim (but not bright) yellow with brown.
Reviewed by: adrian, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34531
The cursors related ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33217
The FBIOSVIDEO/FBIOGVIDEO ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33216
The FBIOSATTR/FBIOGATTR ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33215
Change the 'period' argument to 'duration' and change its type to
sbintime_t so we can more easily express different durations.
Reviewed by: tsoome, glebius
Differential Revision: https://reviews.freebsd.org/D32619
APM BIOS was relevant only to early laptops (approximately P166 or
P200 and slower). These have not been relevant for a long time, and
this code has been untested for a long time (as far as I can
tell). The APM compat code in ACPI and the apm(8) command is not being
retired. Both of these items are still in use (apm(8) is more
scriptable than the replacement acpiconf, for the most part). This has
been commented out of i386 GENERIC since 2002. This code is not
relevant to any other port.
Discussed on: arch@
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Analysis seems to reveal that sc->keyboard >= 0 implies sc->kbd != NULL and
there's no such scenario where sc->kbd is set (and theoretically used to
rebuild sc->keyboard) with the keyboard unavailable.
Drop the index softc. The index is only explicitly needed in few places, in
which case we can just as easily grab it from sc->kbd. There's no need for
keeping sc->kbd and sc->keyboard in sync when it can be readily accomplished
with just the former.
This was purely automatically massaged... some parts are still imperfect,
but this is close enough to make it more readable/easy to work on.
Unfortunately the vt/syscons/kdb situation slightly complicates changes to
tty locking, so some work will need to be done to remediate that.
Non-x86 arches use an inconsistently named header for the file containing
"pc" attributes, and the ifdef messes to include the right header were out
of date in the 2 files that I added to the MI files list.
Only amd64, arm, i386, mips, powerpc and sparc64 are supposed to support
syscons. Only arm and mips were out of date in the ifdef. Test
coverage for of syscons in arm is broken (turned off) in NOTES, but
syscons is in some other arm config files which universe detects as broken.
arm64 and riscv remain broken due to the opposite bug of not turning off
sc in NOTES, the same as before r344458 (see r344443).
The header is MD to contain possibly-non-"pc" encodings of attributes, but
since the attributes are essentially virtual in graphics mode and non-x86
arches only support graphics mode, the header has always been the same on
all arches except for different style bugs, so there should be only 1 MI
copy of it for syscons' use. It was used in pcvt and still gives an an
API and an ABI, so it should be public and MI near or in sys/consio.h.
First remove ifdefs of the unsupported option SC_DUMB_TERMINAL which
prevented building using both in the same kernel and broke regression
tests. This option will be replaced by per-emulator supported options.
The dumb emulator rotted with KSE in r83366, but usually compiled since
it is ifdefed to nothing unless SC_DUMB_TERMINAL is defined. The type
of an unused function parameter changed.
Both emulators rotted when 2 new methods were added while the emulators
were removed. Only null methods are needed, but null function pointers
give panics instead.
The wildcard in the default for the unsupported option SC_DFLT_TERM
never really worked. It tends to prefer the dumb emulator when multiple
emulators are configured. Change it to prefer scteken for compatibility.
will be committed later.
The "sc" emulator has the advantages of full support for cons25 and running
about 8 times faster than teken (for writing to the frame buffer).
The "dumb" emulator has the advantage of being simple.
Runtime choice of the emulator is good, but compile time choice is bad.
when TEKEN_CONS25 is configured. Fix this by adding a function to
set the flag that enables the fix and always calling this function
for syscons.
Expand the man page for teken_set_cons25(). This function is not
very useful since it can only set but not clear 1 flag. In practice,
it is only used when TEKEN_CONS25 is configured and all that does is
choose the the default emulation for syscons at compile time.
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the
defaults.
Default to color numbers in reverse order to CPU numbers (instead of
in the same order with white first and wrapping to dark grey), so that
the brightest bright colors are used first. Don't use dark grey at all;
replace it by dark green.
Syscons has too many compile-time options, but this one is needed in
in case the defaults give something like white on white, or the user
really hates this feature and can't wait to turn it off in rc.
MFC after: next release?
The per-CPU ts is not initialized early, so the global kernel ts is used
early, but it ony has 1 (normal) attribute. Switch this to the per-CPU
attribute.
The difference is most visible with EARLY_AP_STARTUP.
Change to using the curcpu macro instead of PCPU_GET(cpuid) in 2 places for
the above and in 1 other place in my old code in syscons. The function-like
spelling is perhaps better for indicating that curcpu is volatile (unlike
curthread), but for CPU attributes volatility is a feature.
The SCHEDULER_STOPPED() hack breaks locking generally, and
mtx_trylock_*() especially. When mtx_trylock_*() returns nonzero,
naive code version here trusts it to have worked. But when
SCHEDULER_STOPPED() is true, mtx_trylock_*() returns 1 without doing
anything. Then mtx_unlock_*() crashes especially badly attempting to
unlock iff the error is detected, since mutex unlocking functions don't
check SCHEDULER_STOPPED().
syscons already didn't trust mtx_trylock_spin(), but it was missing the
logic to turn on sp->kdb_locked when turning off sp->mtx_locked during
panics. It also used panicstr instead of SCHEDULER_LOCKED because I
thought that panicstr was more fragile. They only differ for a window
of lines in panic(), and in broken cases where stop_cpus_hard() in panic()
didn't work.
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Normally, shutdown_nice() just signals init. However, sometimes it
calls kern_reboot directly. For that case, r331298 dropped the Giant
lock before calling it. This turns out to be incorrect for the more
common case where init exists and we just signal it. Restore the old
behavior. The direct call to kern_reboot() doesn't sync buffers to the
disk, so should work with Giant held, so we don't need to drop locks
here for that.
Noticed by: bde@
Sponsored by: Netflix
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
- Do not report T-axis wheel events as button presses
- Reverse T-axis to match Linux
- Remove wrong comment. T-axis buttons state should be checked by level not
by edge to allow continuous wheel tilt reporting
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676