Commit Graph

40 Commits

Author SHA1 Message Date
Peter Wemm
6a4c2576dc Mass update of isa drivers using compatability shims to use
COMPAT_ISA_DRIVER() so that we can get rid of the evil isa_compat.h table.
2000-05-28 13:40:48 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Eivind Eklund
494dc6bbe2 Fix typo - sizeof(struct crtl *) -> sizeof(struct ctrl *).
XXX This still assume that bzero() over a field create null-pointers,
which seems a chancy proposition at best.
1998-12-13 23:25:29 +00:00
Bruce Evans
f9809f9802 Ifdefed a conditionally used include.
Don't depend on "implicit int".

Don't bloat the data section with labpc_devsw_installed.
1998-12-06 17:58:21 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Bruce Evans
00671271c3 Fixed printf format errors. Only one left in LINT on i386's. 1998-08-24 02:28:16 +00:00
Julian Elischer
f7ea2f55d1 There is no such thing any more as "struct bdevsw".
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries.  The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).

rawread()/rawwrite() went away as part of this though it's not strictly
the same  patch, just that it involves all the same lines in the drivers.

cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.

Reviewed by: Eivind Eklund and Mike Smith
	Changes suggested by eivind.
1998-07-04 22:30:26 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Bruce Evans
c1087c1324 Support compiling with `gcc -ansi'. 1998-04-15 17:47:40 +00:00
Eivind Eklund
3f2076daf5 Make the debug options new-style.
This also zaps a DPT option from lint; it wasn't referenced from
anywhere.
1998-01-31 07:23:16 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Poul-Henning Kamp
ab3f746966 In all such uses of struct buf: 's/b_un.b_addr/b_data/g' 1997-12-02 21:07:20 +00:00
Justin T. Gibbs
30153f33ba restore a line I accidentally deleted with my callout changes.
Submitted by:	bde@FreeBSD.org
1997-09-22 18:04:42 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Poul-Henning Kamp
6704a50967 Stop using old compatibility names from buf.h 1996-10-13 14:36:06 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Poul-Henning Kamp
3554bebc3e A nasty #define, so that we don't use buf->b_actf anymore. 1996-05-03 20:52:18 +00:00
Marc G. Fournier
6e18ce4676 Switched from using devfs_add_sw() to using devfs_add_swf()
Reviewed by:	julian@freebsd.org
1996-03-28 14:29:52 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
Poul-Henning Kamp
920e8dc220 Fiddle with <machine/isa_device.h> 1995-11-14 20:49:24 +00:00
Bruce Evans
bf25be48a5 Make everything except the unsupported network sources compile cleanly
with -Wnested-externs.
1995-08-16 16:14:28 +00:00
Peter Dufault
c8bb1269a8 Return the correct number of I/O ports as part of the probe so that the
conflict resolution works.
1995-07-31 09:38:21 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Peter Dufault
34688a8bd5 Reduce latency by checking FIFO for samples in start
Remove flags by testing register shadow

Handle apparent pending interrupt after interrupts disabled.
1995-05-02 17:29:28 +00:00
Peter Dufault
b74f75a231 Renamed "aio.h" as <sys/dataacq.h>. 1995-04-28 12:05:36 +00:00
Peter Dufault
657e73c4f5 Add National Instruments "LabPC" driver 1995-04-28 00:51:40 +00:00