tlv_partition_header has field *preset* to support RFID-selectable
segments of dynamic configuration
Submitted by: Mateusz Wrzesinski <mwrzesinski at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
This allows an MTU change to be requested on unpriviliged functions
without also setting all the other parameters supported by MC_CMD_SET_MAC.
The enhanced SET_MAC command was introduced in v4_7 firmware.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4958
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4961
we want to use it.
The rate table was being initialised in low->high, but the link quality
table was being initialised high->low. So, when we did a lookup, we
would get the indexes wrong.
This started by a patch from dragonflybsd which reversed how the ni->in_ridx[]
array is being used; I'd rather it all be consistent. So, this is consistent.
Inspired by: what I did to iwn(4) a while ago
Inspired by: DragonflyBSD; <imre@vdsz.com>
underflow when we have small blocks of memory at the start and end of the
32-bit address range.
While here, only insert mappings pointing at a non-zero amount of memory.
Sponsored by: ABT Systems Ltd
Previously the polarity was for TTL levels, which are the reverse of RS-232.
Also add handling of the UART_PPS_INVERT_PULSE option bit in the sysctl
value, the same as was recently added to uart(4), so that people using TTL
level connections can request a logical inverting of the signal.
Use the named constants from the new dev/uart/uart_ppstypes.h for the pps
capture modes and option bits.
not call VOP_CLOSE() manually. Instead, delegate the close to
fo_close() performed as part of the fdrop() on the file failed to
open. For this, finish constructing file on error, in particular, set
f_vnode and f_ops.
Forcibly resetting f_ops to badfileops disabled additional cleanups
performed by fo_close() for some file types, in this case it was noted
that cdevpriv data was corrupted. Since fo_close() call must be
enabled for some file types, it makes more sense to enable it for all
files opened through vn_open_cred().
In collaboration with: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4957
Add locking around access to bv_cnt which is currently being done unlocked
PR: 206224
Reviewed by: imp
Approved by: jhb
MFC after: 1 week
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D4931
- Add the structure with already known fields offsets
(some of them were taken from this driver,
some (channel_plan, rf_* fields) - from TP-LINK official driver)
- Fix a typo / dehardcode a constant in RTL8192C ROM structure.
Tested with RTL8188EU, STA mode
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4274
If the bootpool does not start at the first sector of the BSD partition
then zfsldr seeks to the wrong offset inside the ZFS vdev label, and is
unable to find zfsboot, so the system does not boot
If 4k alignment is requested, align the BSD partition in the MBR table,
and align the swap and data pool, but the bootpool must start at sector 1
While here, if 4k alignment is requested, disable MBR CHS alignment, as
this results in not-4k aligned partitions.
Reported by: Alex Wilkinson
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
audit_record_write(). This is important so that VFS_STATFS() is not
done on the NULL or freed mp and the check for free space is
consistent with the vnode used for write.
Add vn_start_write() braces around VOP_FSYNC() calls on the audit vnode.
Move repeated code to fsync vnode and panic to the helper
audit_worker_sync_vp().
Reviewed by: rwatson
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
than ascending order in vm_phys_alloc_contig() so that, for example, a
sequence of contigmalloc(low=0, high=4GB) calls doesn't exhaust the supply
of low physical memory resulting in a later contigmalloc(low=0, high=1MB)
failure.
Reported by: cy
Tested by: cy
Sponsored by: EMC / Isilon Storage Division
- Get rid of unused argc/argv variables in main
- Exit on failure with a return code of 1 instead of -1 with err/errx as a
return code of -1 is implementation dependent
- Bump WARNS to 6
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
reconnect.c:
- Convert the K&R prototype of main to an ANSI prototype to mute a
warning from gcc 4.2.1
- Close s_sock2 after finishing off the last test to plug a leak and
mute a warning from gcc 5.0 about a -Wunused-but-set variable
sendfile.c:
- Fix a -Wunused-but-set warning with gcc 5.0 with pagesize in main(..)
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
- `SOCK_RAW` is the implied supported type parameter for socket(2) per route(4)
- localsw in `sys/kern/uipc_usrreq.c` doesn't have an entry for `SOCK_RAW`, so
the prototype is invalid (this isn't explicitly documented anywhere I could
find)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will help ensure that scripts/parsers don't get confused when the message
is printed out
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This fixes .depend.genassym.o not being included. genassym.o depends on
all of the system headers and when rebuilt regenerates assym.s which
lists offsets for critial .S files to utilize. By having a struct in a
system header change its offsets and not have generassym.o be rebuilt,
this would lead to panics.
The flaw in the initial commit was seeing ${OBJS} in ${SYSTEM_OBJS} and
assuming it had all of ${SRCS} in it. This is not the case though. The
older mkdep code splits out all of the various SRC lists for generating
the .depend file. It also includes ${GEN_CFILES}, which had genassym.c
and was the only significant file lacking from ${SYSTEM_OBJS} upon inspection,
since it is not linked in. Rather than duplicate the likely
soon-to-be-removed mkdep lists, just add genassym.o to the DEPENDOBJS
list. Using ${SRCS} as bsd.dep.mk does would be nice but there are many
files in the build that are only added to ${OBJS} and not ${SRCS}, such
as bf_enc.o derived from bf_enc.S for i386.
Sponsored by: EMC / Isilon Storage Division
Reported by: dhw (several panics on current@)
Pointyhat to: bdrewery
The .MAKEFLAGS check inside of the .for loop is extremely slow for some
reason. Just moving it out of the loop trimmed -V lookup time from 11
seconds to 1 second in the kernel obj directory.
Sponsored by: EMC / Isilon Storage Division
