These MSRs can be used to determine actual (average) performance as
compared to a maximum defined performance.
Availability of these MSRs is indicated by bit0 in CPUID.6.ECX on both
Intel and AMD processors.
MFC after: 5 days
It seems that this MSR has been available in a range of AMD processors
families for quite a while now.
Note1: not all AMD MSRs that are found in amd64 specialreg.h are also in
the i386 version.
Note2: perhaps some additional name component is needed to distinguish
AMD-specific MSRs.
MFC after: 5 days
Xeon 5500/5600 series:
- Utilize IA32_TEMPERATURE_TARGET, a.k.a. Tj(target) in place
of Tj(max) when a sane value is available, as documented
in Intel whitepaper "CPU Monitoring With DTS/PECI"; (By sane
value we mean 70C - 100C for now);
- Print the probe results when booting verbose;
- Replace cpu_mask with cpu_stepping;
- Use CPUID_* macros instead of rolling our own.
Approved by: rpaulo
MFC after: 1 month
APIC interrupt that fires when a threshold of corrected machine check
events is reached. CMCI also includes a count of events when reporting
corrected errors in the bank's status register. Note that individual
banks may or may not support CMCI. If they do, each bank includes its own
threshold register that determines when the interrupt fires. Currently
the code uses a very simple strategy where it doubles the threshold on
each interrupt until it succeeds in throttling the interrupt to occur
only once a minute (this interval can be tuned via sysctl). The threshold
is also adjusted on each hourly poll which will lower the threshold once
events stop occurring.
Tested by: Sailaja Bangaru sbappana at yahoo com
MFC after: 1 month
for parsing model-specific and other fields in machine check events
including the global machine check capabilities and status registers,
CPU identification, and the FreeBSD CPU ID.
- Report these added fields in the console log of a machine check so that
a record structure can be reconstituted from the console messages.
- Parse new architectural errors including memory controller errors.
MFC after: 1 week
processors. With this workaround, superpage promotion can be re-enabled
under virtualization. Moreover, machine check exceptions can safely be
enabled when FreeBSD is running natively on Family 10h processors.
Most of the credit should go to Andriy Gapon for diagnosing the error and
working with Borislav Petkov at AMD to document it. Andriy also reviewed
and tested my patches.
Discussed with: jhb
MFC after: 3 weeks
- For CPUs that only support MCE (the machine check exception) but not MCA
(i.e. Pentium), all this does is print out the value of the machine check
registers and then panic when a machine check exception occurs.
- For CPUs that support MCA (the machine check architecture), the support is
a bit more involved.
- First, there is limited support for decoding the CPU-independent MCA
error codes in the kernel, and the kernel uses this to output a short
description of any machine check events that occur.
- When a machine check exception occurs, all of the MCx banks on the
current CPU are scanned and any events are reported to the console
before panic'ing.
- To catch events for correctable errors, a periodic timer kicks off a
task which scans the MCx banks on all CPUs. The frequency of these
checks is controlled via the "hw.mca.interval" sysctl.
- Userland can request an immediate scan of the MCx banks by writing
a non-zero value to "hw.mca.force_scan".
- If any correctable events are encountered, the appropriate details
are stored in a 'struct mca_record' (defined in <machine/mca.h>).
The "hw.mca.count" is a count of such records and each record may
be queried via the "hw.mca.records" tree by specifying the record
index (0 .. count - 1) as the next name in the MIB similar to using
PIDs with the kern.proc.* sysctls. The idea is to export machine
check events to userland for more detailed processing.
- The periodic timer and hw.mca sysctls are only present if the CPU
supports MCA.
Discussed with: emaste (briefly)
MFC after: 1 month
topology of nehalem/corei7 based systems.
- Remove the cpu_cores/cpu_logical detection from identcpu.
- Describe the layout of the system in cpu_mp_announce().
Sponsored by: Nokia
features of CPUs like reading/writing machine-specific registers,
retrieving cpuid data, and updating microcode.
- Add cpucontrol(8) utility, that provides userland access to
the features of cpuctl(4).
- Add subsequent manpages.
The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX
is created for each cpu present in the systems. The pseudo-device minor
number corresponds to the cpu number in the system. The cpuctl(4) pseudo-
device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID
and UPDATE. The first pair alows the caller to read/write machine-specific
registers from the correspondent CPU. cpuid data could be retrieved using
the CPUID call, and microcode updates are applied via UPDATE.
The permissions are inforced based on the pseudo-device file permissions.
RDMSR/CPUID will be allowed when the caller has read access to the device
node, while WRMSR/UPDATE will be granted only when the node is opened
for writing. There're also a number of priv(9) checks.
The cpucontrol(8) utility is intened to provide userland access to
the cpuctl(4) device features. The utility also allows one to apply
cpu microcode updates.
Currently only Intel and AMD cpus are supported and were tested.
Approved by: kib
Reviewed by: rpaulo, cokane, Peter Jeremy
MFC after: 1 month
PhysMask fields based on the number of physical address bits supported
by the current CPU. The old code assumed 36 bits on i386 and 40 bits on
amd64. In truth, all Intel CPUs up until recently used 36 bits (a newer
Intel CPU uses 38 bits) and all the Opteron CPUs used 40 bits.
In at least one case (the new Intel CPU) having the size of the mask field
wrong resulted in writing questionable values into the MTRR registers on
the application processors (BSP as well if you modify the MTRRs via
memcontrol or running X, etc.). The result of the questionable physmask
was that all of memory was apparently treated as uncached rather than
write-back resulting in a very significant performance hit.
Fix this by constructing a run-time mask for the PhysBase and PhysMask
fields based on the number of physical address bits supported by the CPU.
All 64-bit capable CPUs provide a count of PA bits supported via the
0x80000008 extended CPUID feature, so use that if it is available. If that
feature is not available, then assume 36 PA bits.
While I'm here, expand the (now-unused) macros for the PhysBase and
PhysMask fields to the current largest possible value (52 PA bits).
MFC after: 1 week
PR: i386/120516
Reported by: Nokia
and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The
driver attaches to each cpu device and creates a sysctl node in that
device's sysctl context (dev.cpu.N.temperature). When invoked, the
handler binds to the appropriate CPU to ensure a correct reading.
Submitted by: Rui Paulo <rpaulo@fnop.net>
Sponsored by: Google Summer of Code 2007
Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH
Approved by: re (kensmith)
MFC after: 3 weeks
- Add newer CPUID definitions for future use.
Many thanks to Mike Tancsa <mike at sentex dot net> for providing test
cases for Intel Pentium D and AMD Athlon 64 X2.
Approved by: anholt (mentor)
- export the rest of the cpu features (and amd's features).
- turn on EFER_NXE, depending on the NX amd feature bit
- reorg the identcpu stuff a bit in order to stop treating the
amd features as second class features (since it is now a primary feature
bit set) and make it easier to export.
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code. pmap uses
a variation of the PAE code in order to avoid having to worry about 4
levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
i386 loader. This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
not been translated yet, and some that I cheated and wrote dumb C
versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
passing, as is native on the amd64 ABI), and the 'syscall' instruction
for syscalls. int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
of places (eg: to find which register they use to replace the trashed
%rcx register in the syscall instruction). As a result, there is not a
lot of similarity. I did look at NetBSD a few times while debugging to
get some ideas about what I might have done wrong in my first attempt.
