The xen_domain_type and HYPERVISOR_shared_info variables are shared by
all Xen architectures, so they should be in common rather than
reimplemented by each architecture.
hvm_start_flags is used by xen_initial_domain() and so needs to be in
common.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D28982
The evtchn_type enum is only touched by the Xen interrupt code. Other
event channel uses no longer need the value, so that has been moved to
restrict its use.
Copyright note. The current evtchn_type was introduced at 76acc41fb7
by Justin T. Gibbs. This in turn appears to have been heavily inspired
by 30d1eefe39 done by Kip Macy.
Reviewed by: royger
xen_intr_handle_upcall() has two interfaces. It needs to be called by
the x86 assembly code invoked by the APIC. Second, it needs to be called
as a driver_filter_t for the XenPCI code and for architectures besides
x86.
Unfortunately the driver_filter_t interface was implemented as a wrapper
around the x86-APIC interface. Now create a simple wrapper for the
x86-APIC code, which calls an architecture-independent
xen_intr_handle_upcall().
When called via intr_event_handle(), driver_filter_t functions expect
preemption to be disabled. This removes the need for
critical_enter()/critical_exit() when called this way.
The lapic_eoi() call is only needed on x86 in some cases when invoked
directly as an APIC vector handler.
Additionally driver_filter_t functions have no need to handle interrupt
counters. The intrcnt_add() calling function was reworked to match the
current situation. intrcnt_add() is now only called via one path.
The increment/decrement of curthread->td_intr_nesting_level had
previously been left out. Appears this was mostly harmless, but this
was noticed during implementation and has been added.
CONFIG_X86 is a leftover from use with Linux. While the barrier isn't
needed for FreeBSD on x86, it will be needed for FreeBSD on other
architectures.
Copyright note. xen_intr_intrcnt_add() was introduced at 76acc41fb7
by Justin T. Gibbs. xen_intrcnt_init() was introduced at fd036deac1
by John Baldwin.
sys/x86/xen/xen_arch_intr.c was originally created by Julien Grall in
2015 for the purpose of holding the x86 interrupt interface. Later it
was found xen_intr_handle_upcall() was better earlier, and the x86
interrupt interface better later. As such the filename and header list
belong to Julien Grall, but what those were created for is later.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D30006
This overlaps the purpose of __XEN_INTERFACE_VERSION__. Remove Xen 3.0.2
compatibility. __XEN_INTERFACE_VERSION__ has compatibility to Xen 3.2.8
enabled. As Xen 3.3 was released almost 15 years ago, it seems unlikely
anyone hasn't updated.
Reviewed by: royger
HYPERVISOR_poll(), HYPERVISOR_block(), and HYPERVISOR_crash() appear no
longer used. Further get_system_time() appears to have disappeared at
some point in the past, so HYPERVISOR_poll() was broken anyway.
No functional change intended.
Reviewed by: royger
Now that the atomic macros are always genuinely atomic on x86, they can
be used for synchronization with Xen. A single core VM isn't too
unusual, but actual single core hardware is uncommon.
Replace an open-coding of evtchn_clear_port() with the inline.
Substantially inspired by work done by Julien Grall <julien@xen.org>,
2014-01-13 17:40:58.
Reviewed by: royger
MFC after: 1 week
This is required for a further change that will make use of a field
that was added in version 0x00040d00.
No functional change expected.
Sponsored by: Citrix Systems R&D
xenbus needs to keep track of the devices exposed on xenstore, so that
it can trigger frontend and backend device creation.
Removal of backend devices is currently detected by checking the
existence of the device (backend) xenstore directory, but that's prone
to races as the device driver would usually add entries to such
directory itself, so under certain circumstances it's possible for a
driver to add node to the directory after the toolstack has removed
it. This leads to devices not removed, which can eventually exhaust
the memory of FreeBSD.
Fix this by checking for the existence of the 'state' node instead of
the directory, as such node will always be present when a device is
active, and will be removed by the toolstack when the device is shut
down. In order to avoid any races with the updating of the 'state'
node by FreeBSD and the toolstack removing it use a transaction in
xenbusb_write_ivar() for that purpose.
Reported by: Ze Dupsys <zedupsys@gmail.com>
Sponsored by: Citrix Systems R&D
These headers originate with the Xen project and shouldn't be mixed with
the main portion of the FreeBSD kernel. Notably they shouldn't be the
target of clean-up commits.
Switch to use the headers in sys/contrib/xen.
Reviewed by: royger
Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlocked with bus_topo_unlock(). If you need the topology lock for
some reason, bus_topo_mtx() will provide that.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D31831
The current definition for the MMAP_RESOURCE ioctl was wrong as it
didn't copy back the result to the caller. Fix the definition and also
remove the bogus attempt to copy the result in the implementation.
Note such copy back is only needed when querying the size of a
resource.
Sponsored by: Citrix Systems R&D
ARM guest is considered as HVM in Freebsd but they only support PV disk
(no emulation available).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29403
ARM guest is considered as HVM but it only supports PV nics (no
emulation available).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29405
Several of x86 enable/disable functions depend upon the xen*domain()
functions. As such the xen*domain() functions need to be declared
before machine/xen-os.h.
Officially declare direct inclusion of machine/xen/xen-os.h verboten as
such will break these functions/macros. Remove one such soon to be
broken inclusion.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29811
FreeBSD should always use the same version across the source. If not
it's a call for problem.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29407
PVHv1 was officially removed from Xen in 4.9, so just axe the related
code from FreeBSD.
Note FreeBSD supports PVHv2, which is the replacement for PVHv1.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, Elliott Mitchell
Differential Revision: https://reviews.freebsd.org/D30228
This is x86-only and so should not be in the common area.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential revision: https://reviews.freebsd.org/D29040
Fix compilation since machine/xen/xen-os.h is requiring definition
existing in xen/xen-os.h.
In general machine/xen/xen-os.h should never be included
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential revision: https://reviews.freebsd.org/D29043
Use an interface compatible with the Linux one so that the user-space
libraries already using the Linux interface can be used without much
modifications.
This allows an open privcmd instance to limit against which domains it
can act upon.
Sponsored by: Citrix Systems R&D
Use an interface compatible with the Linux one so that the user-space
libraries already using the Linux interface can be used without much
modifications.
This allows user-space to make use of the dm_op family of hypercalls,
which are used by device models.
Sponsored by: Citrix Systems R&D
The interface is mostly the same as the Linux ioctl, so that we don't
need to modify the user-space libraries that make use of it.
The ioctl is just a proxy for the XENMEM_acquire_resource hypercall.
Sponsored by: Citrix Systems R&D
Xenstore watches received are queued in a list and processed in a
deferred thread. Such queuing was done without any checking, so a
guest could potentially trigger a resource starvation against the
FreeBSD kernel if such kernel is watching any user-controlled xenstore
path.
Allowing limiting the amount of pending events a watch can accumulate
to prevent a remote guest from triggering this resource starvation
issue.
For the PV device backends and frontends this limitation is only
applied to the other end /state node, which is limited to 1 pending
event, the rest of the watched paths can still have unlimited pending
watches because they are either local or controlled by a privileged
domain.
The xenstore user-space device gets special treatment as it's not
possible for the kernel to know whether the paths being watched by
user-space processes are controlled by a guest domain. For this reason
watches set by the xenstore user-space device are limited to 1000
pending events. Note this can be modified using the
max_pending_watch_events sysctl of the device.
This is XSA-349.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE.
Reviewed by: royger
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23638
The main differences with the currently implemented method are:
- Requires a local APIC EOI, since it doesn't bypass the local APIC
as the previous method used to do.
- Can be set to use different IDT vectors on each vCPU. Note that
FreeBSD doesn't make use of this feature since the event channel
IDT vector is reserved system wide.
Note that the old method of setting the event channel upcall is
not removed, and will be used as a fallback if this newly introduced
method is not available.
MFC after: 1 month
Sponsored by: Citrix Systems R&D
Register interrupts using the PIC pic_register_sources method instead
of doing it in apic_setup_io. This is now required, since the internal
interrupt structures are not yet setup when calling apic_setup_io.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
In order to setup an initial environment and jump into the generic
hammer_time initialization function. Some of the code is shared with
PVHv1, while other code is PVHv2 specific.
This allows booting FreeBSD as a PVHv2 DomU and Dom0.
Sponsored by: Citrix Systems R&D
Allow the hypercall page to be initialized very early, even before
vtophys is functional. Also make the function global so it can be
called by other files.
This will be needed in order to perform the early bringup on PVHv2
guests.
Sponsored by: Citrix Systems R&D
HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
The PVHv2 entry point is fairly similar to the multiboot1 one. The
kernel is started in protected mode with paging disabled. More
information about the exact BSP state can be found in the pvh.markdown
document on the Xen tree.
This entry point is going to be joined with the native entry point at
hammer_time, and in order to do so the BSP needs to be bootstrapped
into long mode with the same set of page tables as used on bare metal.
Sponsored by: Citrix Systems R&D
This code was left over when it was imported from Linux. The original
committer thought that those functions would be implemented, so the
prototypes where left in place. Delete them at once.
Submitted by: pratyush
Reviewed by: royger
Differential Review: https://reviews.freebsd.org/D15553
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the
ioctl number, because the generic ioctl handler in the OS takes care
of copying the data from user-space to kernel space, and then calls
the device specific ioctl handler. Thus using ioctl structs with
variable sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Sponsored by: Citrix Systems R&D
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Lock the xenstore request mutex when suspending user-space processes, in order
to prevent any process from holding this lock when going into suspension, or
else the xenstore suspend process is going to deadlock.
Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9638
When running on Xen, it's possible that a suspend request to the hypervisor
fails (return from HYPERVISOR_suspend different than 0). This means that the
suspend hasn't succeed, and the resume procedure needs to properly handle this
case.
First of all, when such situation happens there's no need to reset the vector
callback, hypercall page, shared info, event channels or grant table, because
it's state is preserved. Also, the PV drivers don't need to be reset to the
initial state, since the connection with the backed has not been interrupted.
Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9635
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Current Xen IPI setup functions require that the caller provide a device in
order to obtain the name of the interrupt from it. With early AP startup this
device is no longer available at the point where IPIs are bound, and a KASSERT
would trigger:
panic: NULL pcpu device_t
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff82233a20
vpanic() at vpanic+0x186/frame 0xffffffff82233aa0
kassert_panic() at kassert_panic+0x126/frame 0xffffffff82233b10
xen_setup_cpus() at xen_setup_cpus+0x5b/frame 0xffffffff82233b50
mi_startup() at mi_startup+0x118/frame 0xffffffff82233b70
btext() at btext+0x2c
Fix this by no longer requiring the presence of a device in order to bind IPIs,
and simply use the "cpuX" format where X is the CPU identifier in order to
describe the interrupt.
Reported by: sbruno, cperciva
Tested by: sbruno
X-MFC-With: r310177
Sponsored by: Citrix Systems R&D
A grant-table user-space device will allow user-space applications to map
and share grants (Xen way to share memory) among Xen domains. This grant
table user-space device has been tested with the QEMU Qdisk Xen backed.
Submitted by: jaggi
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D7293
Add a reference count to xenisrc. This is required for implementation of
unmap-notifications in the grant table userspace device (gntdev). We need to
hold a reference to the event channel port, in case the user deallocates the
port before we send the notification.
Submitted by: jaggi
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D7429
This is a license change only commit, which can be found upstream in the Xen
tree as 937324f032f4f77866e80e39de0d697fa5131df1.
Sponsored by: Citrix Systems R&D
