Commit Graph

81 Commits

Author SHA1 Message Date
David Schultz
9c62b3ee7c Make TTYHOG tunable.
Reviewed by:	mike (mentor)
2003-03-05 08:16:29 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
John Baldwin
844933a831 Move an optimization check so that it breaks out of the correct loop.
Basically, as soon as we have run out of events to handle in the swi,
we stop looping through all the channels in a for loop.
2003-02-26 19:21:56 +00:00
Poul-Henning Kamp
f341ca9891 Remove #include <sys/dkstat.h> 2003-02-16 14:13:23 +00:00
John Baldwin
108a50d232 Use critical_enter/exit instead of disable/enable_intr to make this
driver more portable.
2002-11-08 18:32:57 +00:00
John Baldwin
fbc9740955 Cast si_drv2 to intptr_t instead of int to quiet warnings.
Tested on:	alpha
Reported by:	marcel (on an ia64)
2002-10-25 20:49:24 +00:00
John Baldwin
599c57a971 - New-bussify the rc(4) device driver.
- Add detach support to the driver so that you can kldunload the module.
  Note that currently rc_detach() fails to detach a unit if any of its
  child devices are open, thus a kldunload will fail if any of the tty
  devices are currently open.
- sys/i386/isa/ic/cd180.h was moved to sys/dev/ic/cd180.h as part of
  this change.

Requested by:	rwatson
Tested by:	rwatson
2002-10-23 15:53:09 +00:00
Poul-Henning Kamp
3412120f03 Be consistent about funtions being static.
Spotte by:	FlexeLint.
2002-10-16 10:16:17 +00:00
Robert Watson
6be2f8829a Off-by-128 error in the cuam* device node numbers. 2002-05-20 05:12:56 +00:00
Robert Watson
12f2edc7d5 Bump the rc driver a little bit closer to the 21st century: use
make_dev() to create device nodes for each of the serial port channels
(ttym%d and cuam%d respectively, as borrowed from MAKEDEV).  This allows
the rc driver to work in 5.0.  I've tested it with only one card, but
will try sticking in a second card tomorrow and see what happens.
2002-05-20 05:04:41 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Bruce Evans
ea1499bf8f Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-23 16:01:49 +00:00
Alfred Perlstein
89c9a48352 Remove __P. 2002-03-20 07:51:46 +00:00
John Baldwin
c86b6ff551 Change the preemption code for software interrupt thread schedules and
mutex releases to not require flags for the cases when preemption is
not allowed:

The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe.  Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer.  This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs.  Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called.  (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)

I've tested the changes to the interrupt code on i386 and alpha.  I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine.  PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken.  Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.

Reviewed by:	peter
Tested on:	i386, alpha
2002-01-05 08:47:13 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
John Baldwin
8bd57f8fc2 Remove unneeded includes of sys/ipl.h and machine/ipl.h. 2001-05-15 23:22:29 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Jonathan Lemon
608a3ce62a Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
John Baldwin
5ee2dd82a9 Catch up to the new swi API. 2001-02-09 18:35:53 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
John Baldwin
fbc9c4f042 Catch up to the new software interrupt code.
Noticed by:	phk
2000-10-25 21:24:08 +00:00
John Baldwin
8088699f79 - Overhaul the software interrupt code to use interrupt threads for each
type of software interrupt.  Roughly, what used to be a bit in spending
  now maps to a swi thread.  Each thread can have multiple handlers, just
  like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
  software interrupt thread to run, so spending, NSWI, and the shandlers
  array are no longer needed.  We can now have an arbitrary number of
  software interrupt threads.  When you register a software interrupt
  thread via sinthand_add(), you get back a struct intrhand that you pass
  to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
  more intuitive.  Also, prefix all the members of struct intrhand with
  'ih_'.
- Make swi_net() a MI function since there is now no point in it being
  MD.

Submitted by:	cp
2000-10-25 05:19:40 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Bruce Evans
e3c3da9ab6 Made this file compile again after move of stuff from <machine.ipl.h>
to <sys/ipl.h>.
2000-10-08 14:41:13 +00:00
Peter Wemm
6a4c2576dc Mass update of isa drivers using compatability shims to use
COMPAT_ISA_DRIVER() so that we can get rid of the evil isa_compat.h table.
2000-05-28 13:40:48 +00:00
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Peter Wemm
e27c1addaa Remove #if NFOO > 0 (it's not required in most cases) and also where it
isn't used as a result, remove #include "foo.h".  Many of these drivers
still use NFOO for softc struct sizing etc however.
2000-01-29 16:00:34 +00:00
Poul-Henning Kamp
1ab305ef60 Introduce ttyread() and ttywrite() which do the canonical thing.
Use them in many tty drivers.

Reviewed by: julian, bde
1999-09-28 11:45:31 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
ae8e1d08d7 This patch clears the way for removing a number of tty related
fields in struct cdevsw:

        d_stop          moved to struct tty.
        d_reset         already unused.
        d_devtotty      linkage now provided by dev_t->si_tty.

These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.

The changes in this patch consist of:

        initialize dev->si_tty in *_open()
        initialize tty->t_stop
        remove devtotty functions
        rename ttpoll to ttypoll
        a few adjustments to these changes in the generic code
        a bump of __FreeBSD_version
        add a couple of FreeBSD tags
1999-09-25 16:21:39 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Bruce Evans
e650b8f451 Fixed null setting of `rc_started'. This was fixed for the
corresponding variable `rc_wakeup_started' in rev.1.36 but broken
again in rev.1.37.  This bug only caused excessive polling (it gave
NRC activations for each of the SWI handler and the timeout handler
instead of 1 of each).

Moved cdevsw attachment from the driver probe routine to the driver
attach routine.
1999-06-04 18:53:47 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Peter Wemm
aee579830d Add brackets around && within || to quieten egcs. I've checked the code
and I'm reasonably sure it's right, but I don't have one of the beasties.
1999-05-08 17:52:03 +00:00
Peter Wemm
d5558c001a Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
Dmitrij Tejblum
604359cf9b s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Poul-Henning Kamp
4e2d2aa1cd Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Andrey A. Chernov
83eda2d885 fix handling more than one cards
Submitted by: "Sergey V.Dorokhov" <svd@kbtelecom.nalnet.ru>
1998-09-28 23:27:57 +00:00
Bruce Evans
cf8c7b0963 Added D_TTY to the cdevswitch flags for all tty drivers. This is required
for the Lite2 fix for always returning EIO in dead_read().

Cleaned up the cdevswitch initializers for all tty drivers.

Removed explicit calls to ttsetwater() from all (tty) drivers.  ttsetwater()
is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
Bruce Evans
92971f1fd7 Register tty software interrupt handlers at run time using register_swi()
instead of at compile time using ifdefs.

Use _swi_null instead of dummycamisr.  CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
1998-08-11 17:01:32 +00:00
Bruce Evans
8f5eb45899 Fixed null setting of multiple wakeup prevention variable.
Fixed printf format errors.
1998-08-10 20:47:22 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Poul-Henning Kamp
a4daaa09f2 Implement the spirit but not the letter of Terrys hot-char patch.
The differences Terrys patch and this patch are:
 * Remove a lot of un-needed comments.
 * Don't put l_hotchar at the front of stuct linesw, there is no need to.
 * Use the #defines for the hotchar in the SLIP and PPP line disciplines
1998-02-13 12:46:28 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Bruce Evans
239b7b699e Use ENOIOCTL instead of -1 (= ERESTART) for tty ioctls that are
not handled at a particular level.  This fixes mainly restarting
of interrupted TIOCDRAINs and TIOCSETA{W,F}s.
1997-12-06 13:25:01 +00:00