Commit Graph

546 Commits

Author SHA1 Message Date
Eugene Grosbein
2b5691ee44 Re-add new small tool trim(8) to delete contents for blocks
on devices using wear-leveling algorithms as a few weeks passed
after review and discussion of trim(8) ceased and
we still have no utility to perform the job.

Reviewed by:	hackers@
MFC after:	2 weeks
2019-01-17 18:07:59 +00:00
George V. Neville-Neil
53fc043d41 Remove, the now very outdated, timed.
Submitted by:	Kyle Spiers ksspiers at gmail
Reviewed by:	bcr,brooks,bz,sbruno
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D18505
2018-12-15 21:34:40 +00:00
Stefan Eßer
385e98080c Remove CTM from 13-CURRENT after the release of FreeBSD-12.0.
The removal (and creation of a port) has been pre-announced in UPDATING
1 month ago. Packages are available for all supported FreeBSD vesions.

I did not think that another entry in UPDATING is required to note the
actual removal.

No MFC is planned - CTM shall be kept in base for all releases up to 12.x.

Reviewed by:	rgrimes
Approved by:	imp, bcr (manpages)
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D17935
2018-12-15 16:53:15 +00:00
Emmanuel Vadot
9312900f6d Add a pwm subsystem so we can configure pwm controller from kernel and userland.
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.

Reviewed by:	oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision:	https://reviews.freebsd.org/D17938
2018-12-12 20:56:56 +00:00
Eugene Grosbein
e0d1669595 Remove trim(8) by multiple demands. 2018-12-01 03:20:10 +00:00
Eugene Grosbein
fcd7ccb28c Move trim(1) from usr.bin to usr.sbin to become trim(8).
Requested by:	se
MFC after:	1 month
2018-11-29 16:08:16 +00:00
Kyle Evans
bc82609ae2 Move pmc* bits behind MK_PMC to fix WITHOUT_PMC build
No objection from:	mmacy
MFC after:	3 days
2018-11-05 00:20:58 +00:00
Matt Macy
3b9156971f re-enable pmcstat, pmccontrol, and pmcannotate for gcc4 builds
I had disabled building of the aforementioned targets due to warnings breaking
tinderbox. This silences the warning and restores them to the build.

Reported by:	jhibbits
Reviewed by:	jhibbits
Approved by:	re (gjb)
2018-09-14 01:11:10 +00:00
Ian Lepore
6666009530 Add spi(8), a utility for communicating with a device on a SPI bus from
userland, conceptually similar to what i2c(8) provides for i2c devices.

Submitted by:	Bob Frazier
Differential Revision:	https://reviews.freebsd.org/D15029
2018-06-22 01:59:19 +00:00
Sean Bruno
01cebb69be MK_EFI - Add uefisign and friends to this knob and ensure that we don't
try to build them if MK_OPENSSL is unset.

Reviewed by:	emaste imp kevans
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15211
2018-06-19 21:07:25 +00:00
Rick Macklem
a520a7cf2f Add a command that copies or migrates a data file from one DS to another.
This command can be used by a sysadmin to either copy or migrate a data
file on one DS to another DS.
Its main use is to recover data files onto a mirrored DS after the DS has
been repaired and brought back online.
2018-06-15 19:45:15 +00:00
Rick Macklem
6cb9ec3cc4 Add a command the displays and modifies the pNFS server's extended attribute.
This command allows a sysadmin to display or modify the pnfsd.dsfile extended
attribute used by the pNFS MDS server in various ways.
Its main use is to set a DS's IP address to 0.0.0.0 when that DS has failed,
so that it will not be used for the file when brought back online after
being repaired.
2018-06-15 19:35:08 +00:00
Rick Macklem
725f388bdc Add an entry into the Makefile for pnfsdskill.
pnfsdskill was added by r335192. This commit adds an entry for it to the
Makefile.
2018-06-15 11:54:55 +00:00
Matt Macy
456eeabebc pmc: fix logic in skipping riscv 2018-06-09 02:25:18 +00:00
Matt Macy
6159b91c1f pmc: don't build on riscv where there's no kmod support 2018-06-09 02:15:45 +00:00
Matt Macy
f992dd4b5c pmc: convert native to jsonl and track TSC value of samples
- add '-j' options to filter to enable converting native pmc
  log format to json lines format to enable the use of scripts
  and external tooling

% pmc filter -j pmc.log pmc.jsonl

- Record the tsc value in sampling interrupts as opposed to
  recording nanotime when the sample is copied to a global log
  in hardclock - potentially many milliseconds later.

- At initialize record the tsc_freq and the time of day to give
  us an offset for translating the tsc values in callchain records
2018-06-07 02:03:22 +00:00
Matt Macy
ebfaf69cc0 hwpmc: log name->pid, name->tid mappings
By logging all threads and processes 'pmc filter'
can now filter on process or thread name, relieving
the user of the burden of determining which tid or
pid was which when the sample was taken.

% pmc filter -T if_io_tqg -P nginx pmc.log pmc-iflib.log

% pmc filter -x -T idle pmc.log pmc-noidle.log
2018-06-05 04:26:40 +00:00
Matt Macy
3554f22e67 pmc: Add new sub-command structured "pmc" utility
This will manage pmc functionality with a more
manageable structure of subcommands rather than the
gradually accreted spaghetti logic of overlapping flags
that exists in pmcstat.

This is intended to ultimately have all the same functionality
as pmcannotate+pmccontrol+pmcstat. Currently it just has
"stat" and "system-stat" - counters for the process itself and counters
for the system as a whole respectively (i.e. system-stat includes kernel
threads). Note that the rusage results (page faults/context switches/
user/sys) for stat-system will not account for the system as a whole -
only for the child process specified on the command line.

Implementing stat was suggested by mjg@ and the output is based on that
from Linux's "perf stat".

% pmc stat -- make -j32 buildkernel -DNO_MODULES  -ss > /dev/null
         9598393  page faults           #       0.674 M/sec
          387085  voluntary csw         #       0.027 M/sec
          106989  involuntary csw       #       0.008 M/sec
   2763965982317  cycles
   2542953049760  instructions          #       0.920 inst/cycle
    511562750157  branches
     12917006881  branch-misses         #       2.525%
     17944429878  cache-references      #       0.007 refs/inst
      2205119560  cache-misses          #       12.289%
           43.74  real                  #       2019.72% cpu
          795.09  user                  #       1817.72% cpu
           88.35  sys                   #       202.00% cpu

% make -j32 buildkernel -DNO_MODULES  -ss > /dev/null &
% sudo pmc stat-system cat
^C             103  page faults         #       0.811 M/sec
               4  voluntary csw         #       0.031 M/sec
               0  involuntary csw       #       0.000 M/sec
   2843639070514  cycles
   2606171217438  instructions          #       0.916 inst/cycle
    522450422783  branches
     13092862839  branch-misses         #       2.506%
     18592101113  cache-references      #       0.007 refs/inst
      2562878667  cache-misses          #       13.785%
           44.85  real                  #       0.00% cpu
            0.00  user                  #       0.00% cpu
            0.00  sys                   #       0.00% cpu
2018-05-29 20:28:34 +00:00
Ed Maste
4fa9985611 Sort mlx5tool correctly in usr.sbin/Makefile 2018-05-16 02:51:30 +00:00
Ed Maste
e6a376d196 Retire lmc(4)
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license.  Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).

Reviewed by:	rgrimes
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D15245
2018-05-01 16:30:48 +00:00
Hans Petter Selasky
e808190a59 Add kernel and userspace code to dump the firmware state of supported
ConnectX-4/5 devices in mlx5core.

The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.

The utility allows to store the dump in format
    <address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.

A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.

Submitted by:	kib@
MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-03-08 15:21:56 +00:00
Warner Losh
590682b6e6 Move devmatch to sbin from usr/sbin.
Since we want to use devmatch in context before a split /,/usr system
has mounted /usr, move devmatch to /sbin.

Sponsored by: Netflix
2018-02-12 14:44:21 +00:00
Warner Losh
bdd31a5287 Remove vestiges of digi(4) driver, first attempted in r305235 with
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
2018-01-10 14:58:58 +00:00
Warner Losh
4f7afd4f37 Doh! Never test in one tree and commit from another:
Fix typo: devmath -> devmatch

Sponsored by: Krampus! Carting off naughty committers for millennia
2017-12-25 19:08:39 +00:00
Warner Losh
d9aed21ce3 Match unattached devices on the system to potential kernel modules.
devmatch(8) matchs up devices in the system device tree with drivers
that may match them. For each unattached device in the system, it
tries to find matching PNP info in the linker hints and prints modules
to load to claim the devices.

In --unbound mode, devmatch can look for drivers that have attached to
devices in the device tree and have plug and play information, but for
which no PNP info exists. This helps find drivers that haven't been
converted yet that are in use on this system.

In addition, the ability to dump out linker.hints is provided.

Future commits will add hooks to devd.conf and rc.d to fully automate
using this information.
2017-12-25 18:56:08 +00:00
Warner Losh
1285bcc833 Import Netflix's efibootmgr to help manage UEFI boot variables
efibootmgr manages the UEFI BootXXXX variables that implement the UEFI
Boot Manager protocol defined in the UEFI standards. It is modeled
after the Linux program of the same name with a mostly compatible set
of command line options. Since there's a fair amount of OS specifioc
code due to differeing names and methods of doing things, the
compatibility isn't 100%.

Basic functionality is implemented, though the more advanced next boot
functionality that's been defined elsewhere is unimplemented.

Submitted by: Matt Williams (with unix / efi path xlate by me)
Sponsored by: Netflix
2017-12-09 06:52:20 +00:00
Warner Losh
c1d0ef846c Remove useless .if. The whole point of SUBDIR.yes was so that we
didn't need this construct.

Sponsored by: Netflix
2017-11-09 14:31:25 +00:00
Mateusz Guzik
cfcabed65f Whack procctl(8)
It was supposed to provide a recovery mechanism against bugs in procfs's
long deprecated tracing capabilities.

Remove the tool as a prerequisite to axing the kernel side.

The tracing facility to use is ptrace(2).

MFC after:	2 weeks
2017-09-27 01:03:00 +00:00
Jeremie Le Hen
ac0ced90e0 rwho/ruptime/rwhod shouldn't be gated by RCMDS.
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).

They should *not* be in the rcmds package which is disabled by default.  We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."

This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.

This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.

PR:		220953
Reported by:	peter@, jhb@
Differential Revision:	https://reviews.freebsd.org/D11743
2017-08-08 20:17:07 +00:00
Jeremie Le Hen
eba789dcca Revert r322029 and r322031 so as to recommit them with a better commit log.
PR:		220953
Reported by:	ngie@
2017-08-08 20:07:08 +00:00
Jeremie Le Hen
881d286b1d rwho/ruptime/rwhod shouldn't be gated by RCMDS.
PR:		220953
Reported by:	peter@
Differential Revision:	https://reviews.freebsd.org/D11743
2017-08-03 21:30:12 +00:00
Enji Cooper
01df7d10a5 Remove SUBDIR ordering/uniquifying in *bin/Makefile
After the addition of SUBDIR.yes, uniquifying/ordering the SUBDIRs doesn't
make a whole lot of sense, and it's in effect a half measure.

Ordering SUBDIR (after adding SUBDIR.yes to it) in bsd.subdir.mk is a
separate change that warrants more discussion/testing, because while
the SUBDIR_PARALLEL work largely fixed dependency ordering for SUBDIRs,
there might be downstream FreeBSD consumers that rely on the SUBDIR
ordering.

MFC after:	2 months
Reviewed by:	bdrewery
Differential Revision:	D11398
2017-07-06 04:15:30 +00:00
Warner Losh
2bcbcb593d efidp manipulates UEFI Device Paths in various ways. At the moment, it
formats and parses UEFI standard Device Paths. In the future it will
also translate between FreeBSD driver names and UEFI Device Paths.

Sponsored by: Netflix
2017-03-09 00:33:38 +00:00
Navdeep Parhar
54912308c8 Add cxgbetool(8) to the base system.
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default.  Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.

Reviewed by:	ngie@, gnn@, bdrewery@
MFC after:	1 month
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D9854
2017-03-03 03:11:58 +00:00
Ed Schouten
de44cbc21d Add a Prometheus exporter for sysctl values.
Now that we have our sysctl tree annotated with aggregation labels,
let's go ahead and provide a very simple utility for exporting the
sysctl tree in Prometheus' format. It can either be used in conjunction
with the Prometheus node exporter or run through inetd(8).

The reason why I'm opting for having it in the base system is because it
has a pretty strong integration with some of sysctl's innards, such as
access to iterators, name lookups, metadata and type information. As I
am investigating whether we can add histograms as native types to sysctl
as well, this integration will only get stronger as we go along. That's
why it would be safer to oversee the development of this exporter
ourselves, as opposed to having it as an external project.

This exporter is remarkably compact, especially when compared to the
official Linux binary of the Prometheus node exporter (16 KB vs 12 MB).
I guess this could be an interesting aspect for monitoring embedded
FreeBSD-based systems.

Differential Revision:	https://reviews.freebsd.org/D8792
2016-12-21 08:29:44 +00:00
Baptiste Daroussin
4fe54d4279 Fix build of tzsetup when WITHOUT_DIALOG is set
Hide dialog specific code behind HAVE_DIALOG. It allows to build a stripped
down version (missing the dialog UI) but perfectly function tzsetup when
world is built WITHOUT_DIALOG

Reorganise a bit the code to limit the number of blocks under HAVE_DIALOG

Reviewed by:	emaste
Sponsored by:	https://reviews.freebsd.org/D8325
2016-10-22 22:35:39 +00:00
Warner Losh
b2a7ac4802 Fix building on i386 and arm. But 'public domain' headers on the files
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.

Submitted by: kib@, dim@, zbb@, emaste@
2016-10-13 06:56:23 +00:00
Ed Maste
4d6fa8848f Temporarily disconnect efivar to fix arm and i386 builds 2016-10-12 20:25:03 +00:00
Warner Losh
4b844f8d99 Add efivar(1) to manipulate EFI variables. It uses a similar command
line interface to the Linux program, as well as adding a number of
useful features to make using it in shell scripts easier (since we
don't have a filesystem to fall back on interacting with).

Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
2016-10-11 22:31:45 +00:00
Ed Maste
f987297fc9 Add a WITHOUT_DIALOG src.conf(5) knob
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).

Reviewed by:	dteske
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7969
2016-09-27 18:08:38 +00:00
Baptiste Daroussin
f5e96fb5ed always install etcupdate
Now that etcupdate does not depend on rcs anymore there is no need to
conditionnally install it
2016-08-05 19:24:52 +00:00
Bryan Drewery
d849978d87 Reconnect pmcstudy, lost in r291021
Reported by:	pluknet
MFC after:	3 days
Sponsored by:	EMC / Isilon Storage Division
2016-07-27 20:28:28 +00:00
Kurt Lidl
c0759dac0d Separate BLACKLIST vs BLACKLIST_SUPPORT properly
Sponsored by:	The FreeBSD Foundation
2016-06-07 16:31:03 +00:00
Kurt Lidl
95856e1457 Add basic blacklist build support
Reviewed by:	rpaulo
Approved by:	rpaulo
Relnotes:	YES
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D5913
2016-06-02 19:06:04 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Warner Losh
486607d0b6 Just install ar5523.bin into /usr/share/firmware and stop compiling it
in.

Differential Review: https://reviews.freebsd.org/D5639
2016-03-15 04:42:37 +00:00
Ruslan Bukin
8f9bf0d661 Remove uathload from build due to issue with GCC 5.2.0:
"ld: --relax and -r may not be used together."
Requires fixing ld command line arguments and testing.
2016-01-26 14:34:40 +00:00
Ian Lepore
91ee346313 Make the building of libsmb and mount_smbfs unconditional, now that r292552
has eliminated alignment and endian problems that were making it fail on
some platforms.

PR:        180438
PR:        189415
2015-12-21 17:41:08 +00:00
Kenneth D. Merry
a9934668aa Add asynchronous command support to the pass(4) driver, and the new
camdd(8) utility.

CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and
completed CCBs may be retrieved via the CAMIOGET ioctl.  User
processes can use poll(2) or kevent(2) to get notification when
I/O has completed.

While the existing CAMIOCOMMAND blocking ioctl interface only
supports user virtual data pointers in a CCB (generally only
one per CCB), the new CAMIOQUEUE ioctl supports user virtual and
physical address pointers, as well as user virtual and physical
scatter/gather lists.  This allows user applications to have more
flexibility in their data handling operations.

Kernel memory for data transferred via the queued interface is
allocated from the zone allocator in MAXPHYS sized chunks, and user
data is copied in and out.  This is likely faster than the
vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in
configurations with many processors (there are more TLB shootdowns
caused by the mapping/unmapping operation) but may not be as fast
as running with unmapped I/O.

The new memory handling model for user requests also allows
applications to send CCBs with request sizes that are larger than
MAXPHYS.  The pass(4) driver now limits queued requests to the I/O
size listed by the SIM driver in the maxio field in the Path
Inquiry (XPT_PATH_INQ) CCB.

There are some things things would be good to add:

1. Come up with a way to do unmapped I/O on multiple buffers.
   Currently the unmapped I/O interface operates on a struct bio,
   which includes only one address and length.  It would be nice
   to be able to send an unmapped scatter/gather list down to
   busdma.  This would allow eliminating the copy we currently do
   for data.

2. Add an ioctl to list currently outstanding CCBs in the various
   queues.

3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do
   that.

4. Test physical address support.  Virtual pointers and scatter
   gather lists have been tested, but I have not yet tested
   physical addresses or scatter/gather lists.

5. Investigate multiple queue support.  At the moment there is one
   queue of commands per pass(4) device.  If multiple processes
   open the device, they will submit I/O into the same queue and
   get events for the same completions.  This is probably the right
   model for most applications, but it is something that could be
   changed later on.

Also, add a new utility, camdd(8) that uses the asynchronous pass(4)
driver interface.

This utility is intended to be a basic data transfer/copy utility,
a simple benchmark utility, and an example of how to use the
asynchronous pass(4) interface.

It can copy data to and from pass(4) devices using any target queue
depth, starting offset and blocksize for the input and ouptut devices.
It currently only supports SCSI devices, but could be easily extended
to support ATA devices.

It can also copy data to and from regular files, block devices, tape
devices, pipes, stdin, and stdout.  It does not support queueing
multiple commands to any of those targets, since it uses the standard
read(2)/write(2)/writev(2)/readv(2) system calls.

The I/O is done by two threads, one for the reader and one for the
writer.  The reader thread sends completed read requests to the
writer thread in strictly sequential order, even if they complete
out of order.  That could be modified later on for random I/O patterns
or slightly out of order I/O.

camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from
the pass(4) driver and also to send request notifications internally.

For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR)
per CAM CCB on the reading side, and a scatter/gather list
(CAM_DATA_SG) on the writing side.  In addition to testing both
interfaces, this makes any potential reblocking of I/O easier.  No
data is copied between the reader and the writer, but rather the
reader's buffers are split into multiple I/O requests or combined
into a single I/O request depending on the input and output blocksize.

For the file I/O path, camdd(8) also uses a single buffer (read(2),
write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list
(readv(2), writev(2), preadv(2), pwritev(2)) on writes.

Things that would be nice to do for camdd(8) eventually:

1.  Add support for I/O pattern generation.  Patterns like all
    zeros, all ones, LBA-based patterns, random patterns, etc. Right
    Now you can always use /dev/zero, /dev/random, etc.

2.  Add support for a "sink" mode, so we do only reads with no
    writes.  Right now, you can use /dev/null.

3.  Add support for automatic queue depth probing, so that we can
    figure out the right queue depth on the input and output side
    for maximum throughput.  At the moment it defaults to 6.

4.  Add support for SATA device passthrough I/O.

5.  Add support for random LBAs and/or lengths on the input and
    output sides.

6.  Track average per-I/O latency and busy time.  The busy time
    and latency could also feed in to the automatic queue depth
    determination.

sys/cam/scsi/scsi_pass.h:
	Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue
	and fetch asynchronous CAM CCBs respectively.

	Although these ioctls do not have a declared argument, they
	both take a union ccb pointer.  If we declare a size here,
	the ioctl code in sys/kern/sys_generic.c will malloc and free
	a buffer for either the CCB or the CCB pointer (depending on
	how it is declared).  Since we have to keep a copy of the
	CCB (which is fairly large) anyway, having the ioctl malloc
	and free a CCB for each call is wasteful.

sys/cam/scsi/scsi_pass.c:
	Add asynchronous CCB support.

	Add two new ioctls, CAMIOQUEUE and CAMIOGET.

	CAMIOQUEUE adds a CCB to the incoming queue.  The CCB is
	executed immediately (and moved to the active queue) if it
	is an immediate CCB, but otherwise it will be executed
	in passstart() when a CCB is available from the transport layer.

	When CCBs are completed (because they are immediate or
	passdone() if they are queued), they are put on the done
	queue.

	If we get the final close on the device before all pending
	I/O is complete, all active I/O is moved to the abandoned
	queue and we increment the peripheral reference count so
	that the peripheral driver instance doesn't go away before
	all pending I/O is done.

	The new passcreatezone() function is called on the first
	call to the CAMIOQUEUE ioctl on a given device to allocate
	the UMA zones for I/O requests and S/G list buffers.  This
	may be good to move off to a taskqueue at some point.
	The new passmemsetup() function allocates memory and
	scatter/gather lists to hold the user's data, and copies
	in any data that needs to be written.  For virtual pointers
	(CAM_DATA_VADDR), the kernel buffer is malloced from the
	new pass(4) driver malloc bucket.  For virtual
	scatter/gather lists (CAM_DATA_SG), buffers are allocated
	from a new per-pass(9) UMA zone in MAXPHYS-sized chunks.
	Physical pointers are passed in unchanged.  We have support
	for up to 16 scatter/gather segments (for the user and
	kernel S/G lists) in the default struct pass_io_req, so
	requests with longer S/G lists require an extra kernel malloc.

	The new passcopysglist() function copies a user scatter/gather
	list to a kernel scatter/gather list.  The number of elements
	in each list may be different, but (obviously) the amount of data
	stored has to be identical.

	The new passmemdone() function copies data out for the
	CAM_DATA_VADDR and CAM_DATA_SG cases.

	The new passiocleanup() function restores data pointers in
	user CCBs and frees memory.

	Add new functions to support kqueue(2)/kevent(2):

	passreadfilt() tells kevent whether or not the done
	queue is empty.

	passkqfilter() adds a knote to our list.

	passreadfiltdetach() removes a knote from our list.

	Add a new function, passpoll(), for poll(2)/select(2)
	to use.

	Add devstat(9) support for the queued CCB path.

sys/cam/ata/ata_da.c:
	Add support for the BIO_VLIST bio type.

sys/cam/cam_ccb.h:
	Add a new enumeration for the xflags field in the CCB header.
	(This doesn't change the CCB header, just adds an enumeration to
	use.)

sys/cam/cam_xpt.c:
	Add a new function, xpt_setup_ccb_flags(), that allows specifying
	CCB flags.

sys/cam/cam_xpt.h:
	Add a prototype for xpt_setup_ccb_flags().

sys/cam/scsi/scsi_da.c:
	Add support for BIO_VLIST.

sys/dev/md/md.c:
	Add BIO_VLIST support to md(4).

sys/geom/geom_disk.c:
	Add BIO_VLIST support to the GEOM disk class.  Re-factor the I/O size
	limiting code in g_disk_start() a bit.

sys/kern/subr_bus_dma.c:
	Change _bus_dmamap_load_vlist() to take a starting offset and
	length.

	Add a new function, _bus_dmamap_load_pages(), that will load a list
	of physical pages starting at an offset.

	Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios.
	Allow unmapped I/O to start at an offset.

sys/kern/subr_uio.c:
	Add two new functions, physcopyin_vlist() and physcopyout_vlist().

sys/pc98/include/bus.h:
	Guard kernel-only parts of the pc98 machine/bus.h header with
	#ifdef _KERNEL.

	This allows userland programs to include <machine/bus.h> to get the
	definition of bus_addr_t and bus_size_t.

sys/sys/bio.h:
	Add a new bio flag, BIO_VLIST.

sys/sys/uio.h:
	Add prototypes for physcopyin_vlist() and physcopyout_vlist().

share/man/man4/pass.4:
	Document the CAMIOQUEUE and CAMIOGET ioctls.

usr.sbin/Makefile:
	Add camdd.

usr.sbin/camdd/Makefile:
	Add a makefile for camdd(8).

usr.sbin/camdd/camdd.8:
	Man page for camdd(8).

usr.sbin/camdd/camdd.c:
	The new camdd(8) utility.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-12-03 20:54:55 +00:00
Marcelo Araujo
98db8f80a7 Connect ypldap(8) to the build.
Approved by:	bapt (mentor)
2015-11-24 02:27:59 +00:00