Commit Graph

7952 Commits

Author SHA1 Message Date
Glen Barber
fa04db4762 release: fix VMSIZE following 1ca8842f3a
truncate(1) is not case-sensitive with regard to setting the size
of a file.  makefs(8), however, does not honor upper-case values.
Update release-specific files and the release(7) manual page to
reflect this.

MFC with:	1ca8842f3a
Submitted by:	ehem_freebsd_m5p.com (original)
Differential Review:	https://reviews.freebsd.org/D28979
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-03-04 08:43:02 -05:00
Nathan Whitehorn
2c26d77d98 Remove /boot/efi from mtree, missed in 0b7472b3d8.
This had prevented the bootconfig step from determining if an ESP exists,
resulting in its unconditional setup. On BIOS-booted amd64, this wasn't
harmful, just unnecessary, but it resulted in failed installations on
non-EFI-supporting platforms like powerpc64.

MFC after:	3 days
2021-03-02 11:49:41 -05:00
Glen Barber
c883b6fd8c Include Makefile.inc1 in Makefile.vm, missed in previous change
MFC after:	3 days
MFC with:	80ab50e1de, 0be274d373
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-03-02 10:19:59 -05:00
Glen Barber
0be274d373 Adjust where UNAME_r is defined for ports builds
In followup to 80ab50e1de,
export UNAME_r in Makefile.inc1 instead of Makefile.vm.

MFC after:	3 days
MFC with:	80ab50e1de
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-03-02 10:11:04 -05:00
Nathan Whitehorn
1ca8842f3a Use makefs(8) in release VM-image generation instead of md(4) and newfs.
Using makefs instead reduces the privileges needed to build VM images,
simplifies the script (no need to copy files to a fresh image at the end),
and improves portability by allowing generation of cross-endian images.
As a result of the last, this patch also adds support for generation of
powerpc64 and powerpc64le VM images.

No other changes to the output. Tested and working for both amd64 and
powerpc64 targets.

Reviewed by:	gjb
Differential Revision:	https://reviews.freebsd.org/D28912
2021-02-24 21:16:56 -05:00
Nathan Whitehorn
e70eb40271 Mount the ESP on /boot/efi in VM images.
This follows an earlier change (0b7472b3d8) for mounting the ESP from
systems set up through the installer and should be MFC'ed with it.
2021-02-24 08:18:07 -05:00
Nathan Whitehorn
1af48800c2 Delete memstick images for PowerPC.
These images only ever worked on Apple Powermacs, which are now a very
old platform, and did so only for a very loose definition of "worked"
(they booted on a small subset of supported machines). Moreover, all
the machines they *did* boot on also would boot from a memstick made
by dd'ing an CD image to a flash drive. Since a flash drive prepared
in this way would also boot all the newer systems we support, the
memstick images were strictly less functional than the CD images, even
for booting from memory sticks.
Reviewed by:	jhibbits
MFC after:	1 week
2021-02-23 22:17:20 -05:00
Glen Barber
80ab50e1de pass UNAME_r to fix building 14.x ports on 13.x
MFC after:	1 week
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-18 18:53:20 -05:00
Glen Barber
f61e92ca5a release: permanently remove the 'reldoc' target and associates
Following 7b1d1a1658, the structure
for the reldoc target has significantly changed as result of the
ASCIIDoctor/Hugo migration.  As the release notes related files
on the installation medium are inherently out of date, purge them
entirely.

Discussed within:	re, doceng
No objection:		re (silence), doceng (silence)
Timeout:		2 weeks
MFC after:		1 week
MFC to:			stable/13, stable/12, and stable/11 only
Sponsored by:		Rubicon Communications, LLC ("Netgate")
2021-02-17 23:00:03 -05:00
Glen Barber
6462113b70 release.sh: fix OSVERSION and UNAME_r overrides
Add PBUILD_FLAGS and UNAME_r overrides to extra_chroot_setup()
to fix building ports for 14-CURRENT builds on 13.x.

MFC after:	3 days
MFC with:	c511a5ab53
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-11 10:46:38 -05:00
Glen Barber
c511a5ab53 release: fix overriding UNAME_r
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-10 21:23:58 -05:00
Glen Barber
7b1d1a1658 release: disable the 'reldoc' target after the ASCIIDoctor switch
The 'reldoc' target includes release-related documentation on
installation medium.  Since the switch from XML to ASCIIDoctor,
the file locations have moved, and it will take some time to sort
out how this target should work now.

MFC after:	3 days
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-05 11:47:15 -05:00
Glen Barber
805e2876ec release.sh: Skip installing textproc/docproj when NODOC is set
PR:		253192
Submitted by:	Yasuhiro Kimura
MFC after:	3 days
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-02 19:04:11 -05:00
Glen Barber
70dfc101b6 release: update workaround during transition to git
PR:		253181
Submitted by:	Yasuhiro Kimura
MFC after:	3 days
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-02-02 12:19:36 -05:00
Emmanuel Vadot
183d6cc0e0 release: ROCKPRO64: Remove the quirk that disable the big cores
It's not needed anymore.
2021-01-27 23:31:18 +01:00
Glen Barber
5b0914aea2 release: fix PORT variable
Reported by:	Yasuhiro Kimura (yasu xat utahime dot org)
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2021-01-20 12:15:13 -05:00
Glen Barber
33f38c8a98 release.sh: bump Copyright year after previous commit
Sponsored by:	Rubicon Communications, LLC (netgate.com)
2021-01-19 13:53:29 -05:00
Glen Barber
041b28524a release: Add workaround to use SVN for ports
The ports tree is scheduled to be converted from Subversion to Git
after the currently-scheduled 13.0-RELEASE, so the source of truth
will be Subversion for the ports tree.

Implement a hack specifically for this case.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2021-01-19 13:38:33 -05:00
Ed Maste
8fc41ced9f pkgbase: correct typo in System Accounting Utilities
Reported by:	avg, N. J. Mann
2021-01-11 08:44:17 -05:00
Ed Maste
af1878dac7 pkgbase: Rename -acct package System Accounting Utilities
Man pages for these tools refer to 'system accounting'.
2021-01-10 22:27:56 -05:00
Glen Barber
70e64ba449 release.sh: Update GITROOT URL
Hard-code the GITROOT for the ports tree to use cgit-beta
until the ports repository is converted.

While here, remove $FreeBSD$ RCS IDs.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-12-29 09:40:28 -05:00
Mitchell Horne
d8462732ce riscv: increase GENERICSD gap
Leave more room for bootloaders at the beginning of the image. In
particular, the u-boot files for the HiFive Unleashed are ~5MB in size.
2020-12-16 20:21:56 +00:00
Glen Barber
d3df64ad99 Append the branch commit count to _SNAP_SUFFIX for development
snapshot builds.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-12-16 18:40:49 +00:00
Emmanuel Vadot
ff9c6d3f09 release: Rename arm64/RPI3.conf to arm64/RPI.conf
We now have a u-boot port and config.txt for booting on all 64bits
variant of the RPI boards (RPI2v1.1, RPI3* and RPI4*) so use
the new u-boot-rpi-arm64 and the config_arm64.txt files.

Discussed with: karels, kevans
2020-12-15 15:13:06 +00:00
Glen Barber
4708d329f8 Fix staging riscv images.
Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-12-09 20:38:26 +00:00
Glen Barber
5523003a4c Copy arm64 make-memstick.sh and mkisoimages.sh to the riscv
directory to allow properly building *.iso and *.img files.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-12-09 02:21:25 +00:00
Mitchell Horne
3083b412e9 release: don't checksum images if there are none
For platforms that don't have any of the memstick, cdrom, or dvdrom
release images (i.e. riscv64), the release-install target will trip up
when invoking md5(1) on the non-existent image files. Skipping this
allows the install to complete successfully.
2020-12-08 00:48:50 +00:00
Mitchell Horne
a0b9e2e854 RISC-V release confs
Add two release flavors for RISC-V. First, the traditional "big-iron"
images, capable of generating distribution sets and VM images. Installer
images won't be built yet, but can be trivially enabled in the future
with the addition of riscv/make-memstick.sh.

Second, a GENERICSD embedded image. I've opted for this instead of
board-specific SD card images as it allows users to just dd the u-boot
they want. The RISC-V hardware ecosystem is still young, so a
configuration for e.g. the new PolarFire SoC Icicle Kit would likely see
very few users.

Reviewed by:	gjb
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D27045
2020-12-08 00:42:03 +00:00
Mitchell Horne
d46a2a0013 riscv: allow building virtual machine images
RISC-V has the same booting requirements as arm64 (loader.efi, no legacy
boot options), so generated images for both architectures have the same
partition layout.

Reviewed by:	gjb
Differential Revision:	https://reviews.freebsd.org/D27044
2020-12-08 00:37:11 +00:00
Mitchell Horne
86635d4992 release.sh: add support for RISC-V embedded builds
Since the few existing RISC-V hardware platforms are single board
computers, we can piggyback off of arm/arm64's embedded build support
for generating SD card images.

I don't see a pressing need to change the naming in this file at this
time.

Reviewed by:	gjb, manu
Differential Revision:	https://reviews.freebsd.org/D27043
2020-12-08 00:35:13 +00:00
Emmanuel Vadot
e6b9cee76b release: Merge the RPI2 and BEAGLEBONE image with the GENERICSD one
Both RPI2 and BEAGLEBONE are still popular and used arm boards.
Both u-boots can coexist as they are named differently and live in the
fat partition.
This leave us with only one image that can be used for both of those
boards and all the other ones supported by FreeBSD provided that you
install the correct u-boot on it.

Reviewed by:	imp
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D27283
2020-11-24 17:53:13 +00:00
Emmanuel Vadot
a3b4dcfd68 Release: arm: Remove config for old boards
All those board are impossible to buy nowadays and could boot using the
GENERICSD image after putting the correct u-boot on them.

Reviewed by:	imp
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D27282
2020-11-24 17:52:01 +00:00
Emmanuel Vadot
5321a88409 release: rpi3: Copy the bcm2710 variant of the rpi2
This is the dtb intented to be used for booting RPI2 v1.2 in aarch64.
2020-11-22 18:42:08 +00:00
Emmanuel Vadot
44bef6729b release: Switch the Allwinner board to GPT
Allwinner bootrom have an alternate location for u-boot at 128k.
Work was made recently in u-boot to relocate correctly if loaded from
there.
The advantage of this offset is that we can now use a GPT scheme.
2020-11-19 14:27:01 +00:00
Emmanuel Vadot
308c75d1e5 pkgbase: Remove %VCS_REVISION% from utilities comments
We don't do that on other packages so be consistent.
It also don't work when building from git.
2020-11-06 15:21:53 +00:00
Emmanuel Vadot
ea07005137 release: Add an image for CI
A lot of projects CI can't do FreeBSD tests currently.
The main reason is that the project CI infrastructure is runned on Linux
and that our images aren't modifiable from a Linux hosts.
Add a basic image specific for this case (called BASIC-CI for a lack of a
better name).
The image have no package pre-installed.
It only have a few modification to have dhcp client runned on the default
interface and sshd started with option to be able to log on without a password
as root.

Sponsored by: The FreeBSD Foundation

Reviewed by:	re (gjb@)
Differential Revision:	https://reviews.freebsd.org/D25598
2020-11-02 21:10:49 +00:00
Mitchell Horne
e0f9cec7d6 arm64: set the correct partition type in make-memstick.sh
We create a UFS root filesystem using makefs(8), and later pass it to
mkimg(1) when creating the final image. The correct partition type is
freebsd-ufs; the freebsd parition type is for partitions containing a
BSD disklabel.

Reviewed by:	emaste
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D26987
2020-10-30 18:22:46 +00:00
Mitchell Horne
1d76e25a67 arm64: convert virtual machine images to GPT
These images were switched to MBR in r281876 as a way to cope with a
hard-coded partition GUID in QEMU's default EFI firmware. Enough time
has passed that this is no longer a problem; QEMU versions >= 4.0
include a copy of edk2 EFI firmware that can detect the root filesystem
properly. Alternatively, sysutils/u-boot-qemu-arm64 can be used.

Switch back to building these images with a GPT partition table, and
re-enable the swap partition.

Reviewed by:	gjb, emaste
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D26986
2020-10-30 18:20:52 +00:00
Mitchell Horne
0d51f9e589 vmimage.subr: noisier failure for unsupported targets
The return code of write_partition_layout() doesn't bubble up, so an
invocation of make vm-release for an incorrect/unsupported target will
appear to succeed while make vm-install will fail due to missing
files. This isn't a common point of failure, but is worth handling
properly.

Upgrade this case to print a message to stderr, and exit in place. This
is okay to do since at this point in the execution of mk-vmimage.sh,
cleanup() has already been run.

Reviewed by:	gjb
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D26985
2020-10-30 18:18:25 +00:00
Mitchell Horne
027b4efccf Slight refactor in vmimage.subr
De-duplicate the invocation of mkimg(1). No functional change.

Reviewed by:	gjb
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D26984
2020-10-30 18:16:10 +00:00
Glen Barber
bdccfea1ea Bump the ISO EFI partition size from 1024 to 2048, following r366732.
Suggested by:	imp
Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-10-15 23:05:13 +00:00
Glen Barber
a0da9a6272 Increase the amd64 ISO ESP file size from 800KB to 1024KB.
At some poing over the last week, the bootx64.efi file has grown
past the 800KB threshold, resulting in being unable to copy it to
the EFI/BOOT directory.

 # stat -f %z efiboot.znWo7m
 819200
 # stat -f %z stand-test.PIEugN/EFI/BOOT/bootx64.efi
 842752

The comment in the script that creates the ISOs suggests that 800KB
is the maximum allowed for the boot code, however I was able to
boot an ISO with a 1024KB boot partition.  Additionally, I verified
against an ISO from OtherOS, where the boot EFI partition is 2.4MB.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-10-15 17:12:58 +00:00
Brandon Bergren
ead0ba6e8d [PowerPC64LE] Add release building script for powerpc64le.
This was originally part of the initial commit, but after discussion in
D26399, I split it out into its own commit after the kernel config file.

Sponsored by:	Tag1 Consulting, Inc.
2020-09-23 01:13:29 +00:00
Mitchell Horne
6dadc5d1cd arm64: generate ISO release images
Some IPMI implementations on arm64 are reportedly unable to load our
memstick installer images, but support the older ISO format. Start
generating these for arm64.

Unlike installer ISOs for other platforms, these images are UEFI-only.

Reviewed by:	emaste
Relnotes:	yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D26452
2020-09-18 14:40:13 +00:00
Kyle Evans
209dcc7cec pkgbase: use consistent annotation for objectk eys
Everywhere else we use objects ("scripts", generally) we do sepcify the
optional colon. Be consistent and do the same for directories.

PR:		249273
Submitted by:	Martin <martin.jakob gmx com>
MFC after:	1 week
2020-09-18 14:29:01 +00:00
Glen Barber
5fb8eca870 Fix setting RELENGDIR when release.sh is called from an external
script.

Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-09-14 15:58:10 +00:00
Colin Percival
a72eeb2025 Spawn the DHCPv6 client in EC2 instances via rtsold.
Prior to this commit, EC2 AMIs used a "dual-dhclient" tool which was
launched in place of dhclient and spawned both the base system dhclient
for IPv4 and the ISC dhclient from ports for IPv6.

Now that rtsold supports the "M bit" (managed configuration), we can go
back to having the base system dhclient spawned normally, and provide a
script to rtsold which spawns the ISC dhclient from ports when rtsold
decides that it is appropriate.

Thanks to:	bz
MFC after:	1 week
Sponsored by:	https://www.patreon.com/cperciva
2020-09-13 19:56:53 +00:00
Colin Percival
ff5188db54 Bump the size of EC2 AMIs up to 5 GB.
The FreeBSD base system continues to expand.  4GB is now insufficient;
we passed 3 GB in May 2019; we passed 2 GB in August 2017.  Over half
of the disk space used is in /usr/lib/debug/.

Without this change, instances boot but are unusable, since the first
thing which breaks when VM filesystems are too small is the "pkg install"
in the VM building process.
2020-09-13 19:11:45 +00:00
Glen Barber
c71c2b76aa Fix indentation following r365638. No functional changes.
Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-09-11 17:05:09 +00:00
Glen Barber
91ce469984 Add a NOGIT option to avoid explicitly requiring devel/git if the
sources are obtained through a different mechanism.

Reported and tested by:	Ruslan Garipov
Sponsored by:	Rubicon Communications, LLC (netgate.com)
2020-09-11 17:04:09 +00:00