hook it up to ada(4) also. While at it, rename *ad_firmware_geom_adjust()
to *ata_disk_firmware_geom_adjust() etc now that these are no longer
limited to ad(4).
Reviewed by: mav
MFC after: 3 days
HAL/Fujitsu) CPUs. For the most part this consists of fleshing out the
MMU and cache handling, it doesn't add pmap optimizations possible with
these CPU, yet, though.
With these changes FreeBSD runs stable on Fujitsu Siemens PRIMEPOWER 250
and likely also other models based on SPARC64 V like 450, 650 and 850.
Thanks go to Michael Moll for providing access to a PRIMEPOWER 250.
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
7 which corresponds to WSTATE_KMIX in OpenSolaris whenever calling into
it which totally screws us even when restoring %wstate afterwards as
spill/fill traps can happen while in OFW. The rather hackish OpenBSD
approach of just setting the equivalent of WSTATE_KERNEL to 7 also is
no option as we treat %wstate as a bit field. So in order to deal with
this problem actually implement spill/fill handlers for %wstate 7 which
just act as the WSTATE_KERNEL ones except of theoretically also handling
32-bit, turn off interrupts completely so we don't even take IPIs while
in OFW which should ensure we only take spill/fill traps at most and
restore %wstate after calling into OFW once we have taken over the trap
table. While at it, actually set WSTATE_{,PROM}_KMIX before calling into
OFW just like OpenSolaris does, which should at least help testing this
change on non-V1280.
- Remove comments referring to the %wstate usage in BSD/OS.
- Remove the no longer used RSF_ALIGN_RETRY macro.
- Correct some trap table addresses in comments.
- Ensure %wstate is set to WSTATE_KERNEL when taking over the trap table.
- Ensure PSTATE_AM is off when entering or exiting to OFW as well as that
interrupts are also completely off when exiting to OFW as the firmware
trap table shouldn't be used to handle our interrupts.
- Swap the configuration of the first and second large dTLB as with
US-IV+ these can only hold entries of certain page sizes each, which
we happened to chose the non-working way around.
- Additionally ensure that the large iTLB is set up to hold 8k pages
(currently this happens to be a NOP though).
- Add a workaround for US-IV+ erratum #2.
- Turn off dTLB parity error reporting as otherwise we get seemingly
false positives when copying in the user window by simulating a
fill trap on return to usermode. Given that these parity errors can
be avoided by disabling multi issue mode and the problem could be
reproduced with a second machine this appears to be a silicon bug of
some sort.
- Add a membar #Sync also before the stores to ASI_DCACHE_TAG. While
at it, turn of interrupts across the whole cheetah_cache_flush() for
simplicity instead of around every flush. This should have next to no
impact as for cheetah-class machines we typically only need to flush
the caches a few times during boot when recovering from peeking/poking
non-existent PCI devices, if at all.
- Just use KERNBASE for FLUSH as we also do elsewhere as the US-IV+
documentation doesn't seem to mention that these CPUs also ignore the
address like previous cheetah-class CPUs do. Again the code changing
LSU_IC is executed seldom enough that the negligible optimization of
using %g0 instead should have no real impact.
With these changes FreeBSD runs stable on V890 equipped with US-IV+
and -j128 buildworlds in a loop for days are no problem. Unfortunately,
the performance isn't were it should be as a buildworld on a 4x1.5GHz
US-IV+ V890 takes nearly 3h while on a V440 with (theoretically) less
powerfull 4x1.5GHz US-IIIi it takes just over 1h. It's unclear whether
this is related to the supposed silicon bug mentioned above or due to
another issue. The documentation (which contains a sever bug in the
description of the bits added to the context registers though) at least
doesn't mention any requirements for changes in the CPU handling besides
those implemented and the cache as well as the TLB configurations and
handling look fine.
o Re-arrange cheetah_init() so it's easier to add support for SPARC64
V up to VIIIfx CPUs, which only require parts of this initialization.
by UltraSparc-IV and -IV+ as well as SPARC64 V, VI, VII and VIIIfx CPUs.
- Replace TLB_PCXR_PGSZ_MASK and TLB_SCXR_PGSZ_MASK with TLB_CXR_PGSZ_MASK
which just is the complement of TLB_CXR_CTX_MASK instead of trying to
assemble it from the page size bits which vary across CPUs.
- Add macros for the remainder of the SFSR bits, which are useful for at
least debugging purposes.
but also of different types, f.e. Sun Fire V890 can be equipped with a
mix of UltraSPARC IV and IV+ CPUs, requiring different MMU initialization
and different workarounds for model specific errata. Therefore move the
CPU implementation number from a global variable to the per-CPU data.
Functions which are called before the latter is available are passed the
implementation number as a parameter now.
This file was missed in r204152.
but also of different types, f.e. Sun Fire V890 can be equipped with a
mix of UltraSPARC IV and IV+ CPUs, requiring different MMU initialization
and different workarounds for model specific errata. Therefore move the
CPU implementation number from a global variable to the per-CPU data.
Functions which are called before the latter is available are passed the
implementation number as a parameter now.
to the exclusion lists as the CPU nodes aren't handled as regular devices
either. Also add the pseudo-devices found in Sun Fire V1280.
- Allow nexus_attach() and nexus_alloc_resource() to be used by drivers
derived from nexus(4) for subordinate busses.
- Don't add the zero-sized memory resources of glue devices to the resource
lists.
root nexus device for the CPUs as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
It would be great if we could use newbus to deal with the different ways
the 'cpu' devices can hang off of pseudo ones but unfortunately both
cpu_mp_setmaxid() and sparc64_init() have to work prior to regular device
probing.
- Add support for UltraSPARC IV and IV+ CPUs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
This involves changing the MD KTR code to not directly read the UPA
module ID either. We use the MID stored in the per-CPU data instead of
calling cpu_get_mid() as a replacement in order prevent clobbering any
registers as side-effect in the assembler version. This requires CATR()
invocations from mp_startup() prior to mapping the per-CPU pages to be
removed though.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Make sparc64_shutdown_final() static as it's not used outside of
machdep.c.
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
to PCIe bridges.
- Add support for talking the PROM mappings over to the kernel IOTSB
just like we do with the kernel TSB in order to allow OFW drivers
to continue to work.
- Change some members, parameters and variables to unsigned where
more appropriate.
- Change INTMAP_VEC() to take an INO as its second argument rather
than an INR. The former is what I actually intended with this
macro and how it's currently used.
compiled to use the Medium/Low code model, which we currently default
to for the userland. GNU/Linux has moved their default to Medium/Middle
some time ago, which probably explains why the current GNU ld(1) uses
a base in the range between 32 and 44 bits instead.
Submitted by: kib
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
actually specify valid bases that should be treated just as normal.
The PCI specifications have no indication that 0 would be a magic value
indicating a disabled BAR as commonly used on at least amd64 and i386
but not sparc64. It's unclear what to do in pci_delete_resource()
instead of writing 0 to a BAR though as there's no (other) way do
disable individual BARs so its decoding is left enabled in case of
__PCI_BAR_ZERO_VALID for now.
Approved by: re (kib), jhb
MFC after: 1 week
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v)
o define as "1" on amd64 and i386 where there is no restriction
o make the type returned consistent with ALIGN
o remove _ALIGNED_POINTER
o make associated comments consistent
Reviewed by: bde, imp, marcel
Approved by: re (kensmith)
used kernel TLB slots when unloading the kernel or modules, which
results in havoc when loading a kernel and modules which take up
less TLB slots afterwards as the unused but locked ones aren't
accounted for in virtual_avail. Eventually this should be fixed
in the loader which isn't straight forward though and the kernel
should be robust against this anyway. [1]
- Ensure that the addresses allocated directly from phys_avail[] by
pmap_bootstrap_alloc() are always colored properly. This implicit
assumption was broken in r194784 as unlike the other consumers the
DPCPU area allocated for the BSP isn't a multiple of PAGE_SIZE *
DCACHE_COLORS. [2]
- Remove the no longer used global msgbuf_phys.
- Remove the redundant ekva parameter of pmap_bootstrap_alloc().
- Correct some outdated function names in ktr(9) invocations.
Requested by: jhb [1]
Reported by: gavin [2]
Approved by: re (kib)
MFC after: 2 weeks
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.
In collaboration with: jhb
- Modules and kernel code alike may use DPCPU_DEFINE(),
DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined
PCPU_*. Requires only one extra instruction more than PCPU_* and is
virtually the same as __thread for builtin and much faster for shared
objects. DPCPU variables can be initialized when defined.
- Modules are supported by relocating the module's per-cpu linker set
over space reserved in the kernel. Modules may fail to load if there
is insufficient space available.
- Track space available for modules with a one-off extent allocator.
Free may block for memory to allocate space for an extent.
Reviewed by: jhb, rwatson, kan, sam, grehan, marius, marcel, stas
a fair number of static data structures, making this an unlikely
option to try to change without also changing source code. [1]
Change default cache line size on ia64, sparc64, and sun4v to 128
bytes, as this was what rtld-elf was already using on those
platforms. [2]
Suggested by: bde [1], jhb [2]
MFC after: 2 weeks
CACHE_LINE_SIZE constant. These constants are intended to
over-estimate the cache line size, and be used at compile-time
when a run-time tuning alternative isn't appropriate or
available.
Defaults for all architectures are 64 bytes, except powerpc
where it is 128 bytes (used on G5 systems).
MFC after: 2 weeks
Discussed on: arch@
to the full path of the image that is being executed.
Increase AT_COUNT.
Remove no longer true comment about types used in Linux ELF binaries,
listed types contain FreeBSD-specific entries.
Reviewed by: kan
kernel one as the non-faulting flush address in the loader so
we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
ever want to without needing to worry about using a compatible
loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].
whole KVA space using one locked 4MB dTLB entry per GB of physical
memory. On Cheetah-class machines only the dt16 can hold locked
entries though, which would be completely consumed for the kernel
TSB on machines with >= 16GB. Therefore limit the KVA space to use
no more than half of the lockable dTLB slots, given that we need
them also for other things.
- Add sanity checks which ensure that we don't exhaust the (lockable)
TLB slots.
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.
Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.
Reviewed by: marius, grehan
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.
This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.
Reviewed by: marius
Obtained from: sparc64
