kboot_get_phys_load_segment is defined in kboot.h, so remove them from
the .c files.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D38310
Try to open /dev/mem to read in the UEFI memory map. If we can't, then
we'll read it in the trampoline.
Retain reading in /proc/iomem to find reserved areas in Linux. We need
to know them for good places to put the kernel. These are not reflected
in the UEFI memory map. However, we should not adjust the UEFI memory
map since these reserved areas of the Linux kernel are free to be used
once we enter the kexec trampoline...
Sponsored by: Netflix
Reviewed by: tsoome, kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38264
There's no need for an arch pointer to get segments. We can call the
routine directly since we don't need this code to be called from
different context where a pointer is needed.
Sponsored by: Netflix
Reviewed by: kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38266
Copy more of the necessary state for FreeBSD to boot:
o Copy EFI memory tables
o Create custom page tables needed for the kernel to find itself
o Simplify the passing of args to the trampoline by putting them
on the stack rather than in dedicated memory.
This is only partially successful... we get only part way through the
amd64 startup code before dying. However, it's much further than before
the changes.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38259
Update exec.c (copyied from efi/loader/arch/arm64/exec.c) to allow
execution of aarch64 kernels. This includes a new trampoline code that
handles copying the UEFI memory map, if available from the Linux FDT
provided PA. This is a complete implementation now, able to boot from
the LinuxBoot environment on an aarch64 server that only offers
LinuxBoot (though a workaround for the gicv3 inability to re-init is not
yet in FreeBSD). Many 'fit and finish' issues will be addressed in
subsequent commits.
Sponsored by: Netflix
Reviewed by: tsoome, kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38258
Since aarch64 is different, it needs a different smap. We first see if
we have the PA of the table from the FDT info. If so, we copy that and
quit. Otherwise, we do the best we can in translating the /proc/iomap
into EFI Memory Table format.
We also send the system table to the kernel.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38255
Copy the EFI memory tables we were able to get into the MODINFOMD_SMAP
metadata area for the kernel.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38254
It's just a stub, since the kernel learns of memory via FDT.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38253
Move memory enumeration to the enumerate_memory_arch(), tweak the code a
bit to make that fit into that framework.
Also fix a bug in the name of the end location. The old code never found
memory (though amd64 doesn't yet work, this lead to using fallback
addresses that were good enough for QEMU...).
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38250
We have an odd situation with aarch64 memory enumeration. The fdt that
we can get has a PA of the UEFI memory map, as modified by the current
running Linux kernel so it can retain those pages it needs for EFI and
other services. We have to pass in this EFI tablem but don't have access
to it in the boot loader. We do in the trampoline code, so a forthcoming
commit will copy it there for the kernel to use. All for want of /dev/mem
in the target environment sometimes.
However, we also have to find a place to load the kernel, so we have to
fallback to /proc/iomem when we can't read the UEFI memory map directly
from /dev/mem. It will give us good enough results to do this task. This
table isn't quite suitable to be converted to the EFI table, so we use
both methods. We'll fall back to this method also if there's no EFI
table advertised in the fdt. There's no /sys file on aarch64 that has
this information, hence using the old-style /proc/iomem. We're unlikely
to work if there's no EFI, though.
Note: The underlying Linux mechanism is different than the amd64 method
which seems like it should be MI, but unimplemented on aarch64.
Sponsored by: Netflix
Discussed with: kevans
Differential Revision: https://reviews.freebsd.org/D38249
Add stub for new MI interface for enumerating memory. Right now powerpc
looks in the FDT table at a later point in boot since we don't need to
pass a specific memory table to the kernel. Leave it like that for now,
but note plans for the future.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38248
These are declared as extern in a number of files (some with the wrong
return type). Centralize this in modinfo.h and remove a few extra stray
declarations as well that are no longer used. No functional change.
Note: I've not tried to cope with the bi_load() functions which are the
same logical thing. These will be handled separately.
Sponsored by: Netflix
Some typedefs are system dependent, so move them into stat_arch.h where
they are used. On amd64, nlinks is a int64_t, while on aarch64 it's an
int (or int32_t).
Sponsored by: Netflix
Use the system's firmware memory map to find a good place to put the
kernel that won't stomp on anything else. While this uses obstensibly MI
interfaces to get this data, arm64 doesn't have this, nor does
powerpc64, so place it here.
Sponsored by: Netflix
The fixups needed vary somewhat by architecture, so move the FDT fixup
to be per-arch. Rename the fdt_linux_fixup() routine to be
fdt_arch_fixup() and expect all architecutres to fix things up as
needed.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36604
The load address computations are highly architecture specific. There
are generic ways that are augmented by specific constraints of specific
way things work on each architecture. Move the current load segment
computations into a MD routine load_addr.
As part of the move, I'm marking kboot_get_kernel_machine_bits as
unused. This arrived in a prior commit, but never seems to have been
connected, suggesting an incomplete merge at the time, or a path not yet
taken.
Create a stub for amd64 that will be filled in with a later commit.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36603
Implement a stripped down termios, obtained from various files in musl
and HOST_ or host_ prepended to most things and a few unavoidable style
tweaks. Only implements the bits of termios we need for the boot loader:
put the terminal into raw mode, restore terminal settings and speed
stuff.
Sponsored by: Netflix
Clients of libsa are expected to implement exit(). The current exit just
loops forever. It is better to really exit: when running as init that
will reboot the system. When not running as init, other programs can
recover (not that we support running as init, but when we do in the
future, this is still the rigtht thing).
Sponsored by: Netflix
Add support for aarch64. exec.c and ldscript are copied from the EFI
version with #ifdefs for the differences. Once complete, I'll refactor
them. host_syscall.S implements a generic system call. tramp.S is a
first attempt to create a tramoline that we can use to jump to the
aarch64 kernel. Add aarch64-specific startup and stat files as well.
exec.c tweaked slightly to avoid bringing in bi_load(), which will come
in later. Includes tweaks to stat due to name differences between names
on different Linux architectures.
Sponsored by: Netflix
conf.c is the same now between powerpc64 and amd64, so move it up to
kboot. Move powerpc file formats defines to ppc64_elf_freebsd.c
Sponsored by: Netflix
This was copied from powerpc/ofw and has never been used. We also don't
care about -DAIM. It's only relevant for in-kernel structures, which we
don't use in this userland program.
Sponsored by: Netflix
Linux 2.4 introduced getdents64. Switch to using it because aarch64
doesn't have getdents as that syscall was obsoleted before that port was
created.
Sponsored by: Netflix
Create a wrapper for the mount system call. To ensure a sane early boot
environment and to gather data we need for kexec, we may need to mount
some special filesystems.
Sponsored by: Netflix
Early in boot, we need to create the normal stdin/out/err env for the
boot loader to run in. To do that, we need to open the console and
duplicate the file descriptors which requires dup(2). Implement a
wrapper as host_dup.
Sponsored by: Netflix
Linux's /dev/fd is implemented inside of /proc/self/fd, so we may need
to create a symlink to it early in boot. "/dev/fd" and "/dev/std*" might
not be strictly required for the boot loader, but should be present for
maximum flexibility.
Sponsored by: Netflix
Add host_getpid() so we can know if we're running as init(8) or not. If
we are, we may chose to do early system setup / sanity operations.
Sponsored by: Netflix
Implement stat(2) and fstat(2) in terms of newfstatat and newfstat
system calls respectively (assume we have a compat #define when
there's no newfstat and just a regular fstat and do so for ppc).
Snag struct kstat (the Linux kernel stat(2), et al interface) from musl
and attribute properly.
Sponsored by: Netflix
Split _start into _start and _start_c (inspired by musl and the powerpc
impl is copied from there). This allows us to actually get the command
line arguments on all the platforms. We have a very simplified startup
that supports only static linking.
Sponsored by: Netflix
Get amd64 compiling. However, the current kboot supports an old way of
enumerating memory and the new way needs to be incorporated as well. The
powerpc folks could use either, it seems and newer powerpc platforms
need some changes for kboot to work anyway.
This commit includes the linker script, trampoline code to start the new
kernel, Linux system calls and the necessary configuration glue needed
to build the binaries.
This includes a quick hack to get multiboot support, but we need to
really share these defines. The multiiboot2.h is the minimum needed to
build. We have multiboot information in three places now, so a
refactoring is in order.
This should be considered, at best, preliminary and experimental for
anybody wishing to try it out.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35100
Just have the MD code provide syscall and have generic code for the
rest.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33515
Split the powerpc specific parts into kboot/arch/powerpc64. More may be
needed here.
Sponsored by: Netflix
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D33514
