Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
an array "fs_contigdirs[]" to avoid too many directories getting
created in each cylinder group. The memory required for this and
two other arrays (fs_csp[] and fs_maxcluster[]) is allocated with
a single malloc() call, and divided up afterwards. However, the
'space' pointer is not advanced correctly, so fs_contigdirs and
fs_maxcluster end up pointing to the same address.
Add the missing code to advance the 'space' pointer, and remove
an unnecessary update of the pointer that follows.
This is likely to fix the "ffs_clusteralloc: map mismatch" panics
that have been reported recently.
Submitted by: Luke Mewburn <lukem@wasabisystems.com>
in got a bit broken, when ufs_extattr_stop() was called and failed,
ufs_extattr_destroy() would panic. This makes the call to destroy()
conditional on the success of stop().
Submitted by: Christian Carstensen <cc@devcon.net>
Obtained from: TrustedBSD Project
file. ffs will discard any pending dirty pages when it is closed,
so we may as well not waste time trying to clean them. This doesn't
stop other things from writing it out, eg: pageout, fsync(2) etc.
never attempt to hash directories once they are deleted. This fixes
a problem where operations on a deleted directory could trigger
dirhash sanity panics.
to supply the number of bytes to be bcopy()'d to move an entry. If
d_ino == 0 however, DIRSIZ() is not guaranteed to return a sensible
length, so ufs_direnter could end up corrupting a directory during
compaction. In practice I believe this can only happen after fsck_ffs
has fixed a previously-corrupted directory.
We now deal with any mid-block unused entries specially to avoid
using DIRSIZ() or bcopy() on such entries. We also ensure that the
variables 'dsize' and 'spacefree' contain meaningful values at all
times. Add a few comments to describe better this intricate piece
of code.
The special handling of mid-block unused entries makes the dirhash-
specific bugfix in the previous revision (1.53) now uncecessary,
so this change removes it.
Reviewed by: mckusick
that the directory entry was in use before attempting to find it
in the hash structures to change its offset. Normally, unused
entries do not need to be moved, but fsck can leave behind some
unused entries that do. A dirhash sanity panic resulted when the
entry to be moved was not found. Add a check that stops entries
with d_ino == 0 from being passed to ufsdirhash_move().
because it shares ufs code. In ufs_fhtovp(), the test on i_effnlink
is invalid because ext2fs does not maintain this field. In ufs_close(),
i_effnlink is also tested, to determines whether or not to call
vn_start_write(). The ufs_fhtovp issue breaks NFS exporting of
ext2fs filesystems; I believe the other is harmless.
Fix both cases by checking um_i_effnlink_valid in the ufsmount
struct, and use i_nlink if necessary.
Noticed by: bde
Reviewed by: mckusick, bde
entry (d_ino == 0) is found in a position that is not the start of
a DIRBLKSIZ block.
While such entries cannot occur normally (ufs always extends the
previous entry to cover the free space instead), they do not cause
problems and fsck does not fix them, so panicking is bad.
extra getblk/brelse sequence for each lookup. We already had this
buf in ufsdirhash_lookup(), so there was no point in brelse'ing it
only to have the caller immediately reaquire the same buffer.
This should make the case of sequential lookups marginally faster;
in my tests, sequential lookups with dirhash enabled are now only
around 1% slower than without dirhash.
directories. When enabled via "options UFS_DIRHASH", in-core hash
arrays are maintained for large directories. These allow all
directory operations to take place quickly instead of requiring
long linear searches. For now anyway, dirhash is not enabled by
default.
The in-core hash arrays have a memory requirement that is approximately
half the size of the size of the on-disk directory file. A number
of new sysctl variables allow control over which directories get
hashed and over the maximum amount of memory that dirhash will use:
vfs.ufs.dirhash_minsize
The minimum on-disk directory size for which hashing should be
used. The default is 2560 (2.5k).
vfs.ufs.dirhash_maxmem
The system-wide maximum total memory to be used by dirhash data
structures. The default is 2097152 (2MB).
The current amount of memory being used by dirhash is visible
through the read-only sysctl variable vfs.ufs.dirhash_maxmem.
Finally, some extra sanity checks that are enabled by default, but
which may have an impact on performance, can be disabled by setting
vfs.ufs.dirhash_docheck to 0.
Discussed on: -fs, -hackers
(this commit is just the first stage). Also add various GIANT_ macros to
formalize the removal of Giant, making it easy to test in a more piecemeal
fashion. These macros will allow us to test fine-grained locks to a degree
before removing Giant, and also after, and to remove Giant in a piecemeal
fashion via sysctl's on those subsystems which the authors believe can
operate without Giant.
The symptom being treated in 1.98 was to avoid freeing a
pagedep dependency if there was still a newdirblk dependency
referencing it. That change is correct and no longer prints
a warning message when it occurs. The other part of revision
1.98 was to panic when a newdirblk dependency was encountered
during a file truncation. This fix removes that panic and
replaces it with code to find and delete the newdirblk
dependency so that the truncation can succeed.
true. This permits better interoperability with programs which register
filters on their stdin/stdout handles.
Submitted by: Niels Provos <provos@citi.umich.edu>
incorrect due to a missing check for some dependency. This change
avoids the freelist corruption (but not the temporarily inconsistent
state of the file system).
A message is printed as a reminder of the under lying problem when a
pagedep structure is not freed due to the NEWBLOCK flag being set.
Submitted by: Tor.Egge@fast.no
initialized on the file system before trying to grab the lock of the
per-mount extattr structure, as this lock is unitialized in that case.
This is needed because ufs_extattr_vnode_inactive is called from
ufs_inactive, which is also used by EA-unaware file systems such as
ext2fs.
Reviewed by: rwatson
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
Tor created a while ago, removes the raw I/O piece (that has cache coherency
problems), and adds a buffer cache / VM freeing piece.
Essentially this patch causes O_DIRECT I/O to not be left in the cache, but
does not prevent it from going through the cache, hence the 80%. For
the last 20% we need a method by which the I/O can be issued directly to
buffer supplied by the user process and bypass the buffer cache entirely,
but still maintain cache coherency.
I also have the code working under -stable but the changes made to sys/file.h
may not be MFCable, so an MFC is not on the table yet.
Submitted by: tegge, dillon
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
committed to disk before clearing them. More specifically, when
free_newdirblk is called, we know that the inode claims the new
directory block. However, if the associated pagedep is still linked
onto the directory buffer dependency chain, then some of the entries
on the pd_pendinghd list may not be committed to disk yet. In this
case, we will simply note that the inode claims the block and let
the pd_pendinghd list be processed when the pagedep is next written.
If the pagedep is no longer on the buffer dependency chain, then
all the entries on the pd_pending list are committed to disk and
we can free them in free_newdirblk. This corrects a window of
vulnerability introduced in the code added in version 1.95.
vm_mtx does not recurse and is required for most low level
vm operations.
faults can not be taken without holding Giant.
Memory subsystems can now call the base page allocators safely.
Almost all atomic ops were removed as they are covered under the
vm mutex.
Alpha and ia64 now need to catch up to i386's trap handlers.
FFS and NFS have been tested, other filesystems will need minor
changes (grabbing the vm lock when twiddling page properties).
Reviewed (partially) by: jake, jhb
whose name is within that block must ensure not only that the block
containing the file name has been written, but also that the on-disk
directory inode references that block. When a new directory block
is created, we allocate a newdirblk structure which is linked to
the associated allocdirect (on its ad_newdirblk list). When the
allocdirect has been satisfied, the newdirblk structure is moved
to the inodedep id_bufwait list of its directory to await the inode
being written. When the inode is written, the directory entries
are fully committed and can be deleted from their pagedep->id_pendinghd
and inodedep->id_pendinghd lists.
the number of references on the filesystem root vnode to be both
expected and released. Many filesystems hold an extra reference on
the filesystem root vnode, which must be accounted for when
determining if the filesystem is busy and then released if it isn't
busy. The old `skipvp' approach required individual filesystem
xxx_unmount functions to re-implement much of vflush()'s logic to
deal with the root vnode.
All 9 filesystems that hold an extra reference on the root vnode
got the logic wrong in the case of forced unmounts, so `umount -f'
would always fail if there were any extra root vnode references.
Fix this issue centrally in vflush(), now that we can.
This commit also fixes a vnode reference leak in devfs, which could
result in idle devfs filesystems that refuse to unmount.
Reviewed by: phk, bp
comes in for it, the file is really gone, so return ESTALE.
The problem arises when the last reference to an FFS file is
released because soft-updates may delay the actual freeing of the
inode for some time. Since there are no filesystem links or open
file descriptors referencing the inode, from the point of view of
the system, the file is inaccessible. However, if the filesystem
is NFS exported, then the remote client can still access the inode
via ufs_fhtovp() until the inode really goes away. To prevent this
anomoly, it is necessary to begin returning ESTALE at the same time
that the file ceases to be accessible to the local filesystem.
Obtained from: Ian Dowse <iedowse@maths.tcd.ie>
that are committed to being freed and reflect these blocks in the
counts returned by statfs (and thus also by the `df' command). This
change allows programs such as those that do news expiration to
know when to stop if they are trying to create a certain percentage
of free space. Note that this change does not solve the much harder
problem of making this to-be-freed space available to applications
that want it (thus on a nearly full filesystem, you may still
encounter out-of-space conditions even though the free space will
show up eventually). Hopefully this harder problem will be the
subject of a future enhancement.
1) Do not assume that the superblock will be of size fs->fs_bsize.
This fixes a panic when taking a snapshot on a filesystem with
a block size bigger than 8K.
2) Properly calculate the number of fragments that follow the
superblock summary information. This fixes a bug with inconsistent
snapshots.
3) When cleaning up a snapshot that is about to be removed, properly
calculate the number of blocks that need to be checked. This fixes
a bug that created partially allocated inodes.
4) When moving blocks from a snapshot that is about to be removed
to another snapshot, properly account for the reduced number of
blocks in the snapshot from which they are taken. This fixes a
bug in which the number of blocks released from a snapshot did not
match the number that it claimed to have.
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
Make 7 filesystems which don't really know about VOP_BMAP rely
on the default vector, rather than more or less complete local
vop_nopbmap() implementations.
by the inactive routine. Because the freeing causes the filesystem
to be modified, the close must be held up during periods when the
filesystem is suspended.
For snapshots to be consistent across crashes, they must write
blocks that they copy and claim those written blocks in their
on-disk block pointers before the old blocks that they referenced
can be allowed to be written.
Close a loophole that allowed unwritten blocks to be skipped when
doing ffs_sync with a request to wait for all I/O activity to be
completed.
to struct mount.
This makes the "struct netexport *" paramter to the vfs_export
and vfs_checkexport interface unneeded.
Consequently that all non-stacking filesystems can use
vfs_stdcheckexp().
At the same time, make it a pointer to a struct netexport
in struct mount, so that we can remove the bogus AF_MAX
and #include <net/radix.h> from <sys/mount.h>
fs_contigdirs, fs_avgfilesize and fs_avgfpdir. This could cause
panics if these fields were zeroed while a filesystem was mounted
read-only, and then remounted read-write.
Add code to ffs_reload() which copies the fs_contigdirs pointer
from the previous superblock, and reinitialises fs_avgf* if necessary.
Reviewed by: mckusick
VOP_BWRITE() was a hack which made it possible for NFS client
side to use struct buf with non-bio backing.
This patch takes a more general approach and adds a bp->b_op
vector where more methods can be added.
The success of this patch depends on bp->b_op being initialized
all relevant places for some value of "relevant" which is not
easy to determine. For now the buffers have grown a b_magic
element which will make such issues a tiny bit easier to debug.
sized blocks. To enable this option, use: `sysctl -w debug.bigcgs=1'.
Add debugging option to disable background writes of cylinder
groups. To enable this option, use: `sysctl -w debug.dobkgrdwrite=0'.
These debugging options should be tried on systems that are panicing
with corrupted cylinder group maps to see if it makes the problem
go away. The set of panics in question are:
ffs_clusteralloc: map mismatch
ffs_nodealloccg: map corrupted
ffs_nodealloccg: block not in map
ffs_alloccg: map corrupted
ffs_alloccg: block not in map
ffs_alloccgblk: cyl groups corrupted
ffs_alloccgblk: can't find blk in cyl
ffs_checkblk: partially free fragment
The following panics are less likely to be related to this problem,
but might be helped by these debugging options:
ffs_valloc: dup alloc
ffs_blkfree: freeing free block
ffs_blkfree: freeing free frag
ffs_vfree: freeing free inode
If you try these options, please report whether they helped reduce your
bitmap corruption panics to Kirk McKusick at <mckusick@mckusick.com>
and to Matt Dillon <dillon@earth.backplane.com>.
ACL_USER_OBJ and ACL_GROUP_OBJ fields, believing that modification of the
access ACL could be used by privileged processes to change file/directory
ownership. In fact, this is incorrect; ACL_*_OBJ (+ ACL_MASK and
ACL_OTHER) should have undefined ae_id fields; this commit attempts
to correct that misunderstanding.
o Modify arguments to vaccess_acl_posix1e() to accept the uid and gid
associated with the vnode, as those can no longer be extracted from
the ACL passed as an argument. Perform all comparisons against
the passed arguments. This actually has the effect of simplifying
a number of components of this call, as well as reducing the indent
level, but now seperates handling of ACL_GROUP_OBJ from ACL_GROUP.
o Modify acl_posix1e_check() to return EINVAL if the ae_id field of
any of the ACL_{USER_OBJ,GROUP_OBJ,MASK,OTHER} entries is a value
other than ACL_UNDEFINED_ID. As a temporary work-around to allow
clean upgrades, set the ae_id field to ACL_UNDEFINED_ID before
each check so that this cannot cause a failure in the short term
(this work-around will be removed when the userland libraries and
utilities are updated to take this change into account).
o Modify ufs_sync_acl_from_inode() so that it forces
ACL_{USER_OBJ,GROUP_OBJ,MASK,OTHER} ae_id fields to ACL_UNDEFINED_ID
when synchronizing the ACL from the inode.
o Modify ufs_sync_inode_from_acl to not propagate uid and gid
information to the inode from the ACL during ACL update. Also
modify the masking of permission bits that may be set from
ALLPERMS to (S_IRWXU|S_IRWXG|S_IRWXO), as ACLs currently do not
carry none-ACCESSPERMS (S_ISUID, S_ISGID, S_ISTXT).
o Modify ufs_getacl() so that when it emulates an access ACL from
the inode, it initializes the ae_id fields to ACL_UNDEFINED_ID.
o Clean up ufs_setacl() substantially since it is no longer possible
to perform chown/chgrp operations using vop_setacl(), so all the
access control for that can be eliminated.
o Modify ufs_access() so that it passes owner uid and gid information
into vaccess_acl_posix1e().
Pointed out by: jedger
Obtained from: TrustedBSD Project
It is described in ufs/ffs/fs.h as follows:
/*
* Filesystem flags.
*
* Note that the FS_NEEDSFSCK flag is set and cleared only by the
* fsck utility. It is set when background fsck finds an unexpected
* inconsistency which requires a traditional foreground fsck to be
* run. Such inconsistencies should only be found after an uncorrectable
* disk error. A foreground fsck will clear the FS_NEEDSFSCK flag when
* it has successfully cleaned up the filesystem. The kernel uses this
* flag to enforce that inconsistent filesystems be mounted read-only.
*/
#define FS_UNCLEAN 0x01 /* filesystem not clean at mount */
#define FS_DOSOFTDEP 0x02 /* filesystem using soft dependencies */
#define FS_NEEDSFSCK 0x04 /* filesystem needs sync fsck before mount */
His description of the problem and solution follow. My own tests show
speedups on typical filesystem intensive workloads of 5% to 12% which
is very impressive considering the small amount of code change involved.
------
One day I noticed that some file operations run much faster on
small file systems then on big ones. I've looked at the ffs
algorithms, thought about them, and redesigned the dirpref algorithm.
First I want to describe the results of my tests. These results are old
and I have improved the algorithm after these tests were done. Nevertheless
they show how big the perfomance speedup may be. I have done two file/directory
intensive tests on a two OpenBSD systems with old and new dirpref algorithm.
The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports".
The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release.
It contains 6596 directories and 13868 files. The test systems are:
1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for
test is at wd1. Size of test file system is 8 Gb, number of cg=991,
size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current
from Dec 2000 with BUFCACHEPERCENT=35
2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system
at wd0, file system for test is at wd1. Size of test file system is 40 Gb,
number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k
OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50
You can get more info about the test systems and methods at:
http://www.ptci.ru/gluk/dirpref/old/dirpref.html
Test Results
tar -xzf ports.tar.gz rm -rf ports
mode old dirpref new dirpref speedup old dirprefnew dirpref speedup
First system
normal 667 472 1.41 477 331 1.44
async 285 144 1.98 130 14 9.29
sync 768 616 1.25 477 334 1.43
softdep 413 252 1.64 241 38 6.34
Second system
normal 329 81 4.06 263.5 93.5 2.81
async 302 25.7 11.75 112 2.26 49.56
sync 281 57.0 4.93 263 90.5 2.9
softdep 341 40.6 8.4 284 4.76 59.66
"old dirpref" and "new dirpref" columns give a test time in seconds.
speedup - speed increasement in times, ie. old dirpref / new dirpref.
------
Algorithm description
The old dirpref algorithm is described in comments:
/*
* Find a cylinder to place a directory.
*
* The policy implemented by this algorithm is to select from
* among those cylinder groups with above the average number of
* free inodes, the one with the smallest number of directories.
*/
A new directory is allocated in a different cylinder groups than its
parent directory resulting in a directory tree that is spreaded across
all the cylinder groups. This spreading out results in a non-optimal
access to the directories and files. When we have a small filesystem
it is not a problem but when the filesystem is big then perfomance
degradation becomes very apparent.
What I mean by a big file system ?
1. A big filesystem is a filesystem which occupy 20-30 or more percent
of total drive space, i.e. first and last cylinder are physically
located relatively far from each other.
2. It has a relatively large number of cylinder groups, for example
more cylinder groups than 50% of the buffers in the buffer cache.
The first results in long access times, while the second results in
many buffers being used by metadata operations. Such operations use
cylinder group blocks and on-disk inode blocks. The cylinder group
block (fs->fs_cblkno) contains struct cg, inode and block bit maps.
It is 2k in size for the default filesystem parameters. If new and
parent directories are located in different cylinder groups then the
system performs more input/output operations and uses more buffers.
On filesystems with many cylinder groups, lots of cache buffers are
used for metadata operations.
My solution for this problem is very simple. I allocate many directories
in one cylinder group. I also do some things, so that the new allocation
method does not cause excessive fragmentation and all directory inodes
will not be located at a location far from its file's inodes and data.
The algorithm is:
/*
* Find a cylinder group to place a directory.
*
* The policy implemented by this algorithm is to allocate a
* directory inode in the same cylinder group as its parent
* directory, but also to reserve space for its files inodes
* and data. Restrict the number of directories which may be
* allocated one after another in the same cylinder group
* without intervening allocation of files.
*
* If we allocate a first level directory then force allocation
* in another cylinder group.
*/
My early versions of dirpref give me a good results for a wide range of
file operations and different filesystem capacities except one case:
those applications that create their entire directory structure first
and only later fill this structure with files.
My solution for such and similar cases is to limit a number of
directories which may be created one after another in the same cylinder
group without intervening file creations. For this purpose, I allocate
an array of counters at mount time. This array is linked to the superblock
fs->fs_contigdirs[cg]. Each time a directory is created the counter
increases and each time a file is created the counter decreases. A 60Gb
filesystem with 8mb/cg requires 10kb of memory for the counters array.
The maxcontigdirs is a maximum number of directories which may be created
without an intervening file creation. I found in my tests that the best
performance occurs when I restrict the number of directories in one cylinder
group such that all its files may be located in the same cylinder group.
There may be some deterioration in performance if all the file inodes
are in the same cylinder group as its containing directory, but their
data partially resides in a different cylinder group. The maxcontigdirs
value is calculated to try to prevent this condition. Since there is
no way to know how many files and directories will be allocated later
I added two optimization parameters in superblock/tunefs. They are:
int32_t fs_avgfilesize; /* expected average file size */
int32_t fs_avgfpdir; /* expected # of files per directory */
These parameters have reasonable defaults but may be tweeked for special
uses of a filesystem. They are only necessary in rare cases like better
tuning a filesystem being used to store a squid cache.
I have been using this algorithm for about 3 months. I have done
a lot of testing on filesystems with different capacities, average
filesize, average number of files per directory, and so on. I think
this algorithm has no negative impact on filesystem perfomance. It
works better than the default one in all cases. The new dirpref
will greatly improve untarring/removing/coping of big directories,
decrease load on cvs servers and much more. The new dirpref doesn't
speedup a compilation process, but also doesn't slow it down.
Obtained from: Grigoriy Orlov <gluk@ptci.ru>
to not using IO_SYNC. Expose a sysctl (debug.ufs_extattr_sync) for
enabling the use of IO_SYNC.
- Use of IO_SYNC substantially degrades ACL performance when a
default ACL is set on a directory, as there are four synchronous
writes initiated to define both supporting EAs for new
sub-directories, and to set the data; two for new files. Later, this
may be optimized to two writes for sub-directories, one for new
files.
- IO_SYNC does not substantially improve consistency properties due
to the poor consistency properties of existing permissions (which
ACLs are a superset of), due to interaction with soft updates,
and due to differences in handling consistency for data and file
system meta-data.
- In macro-benchmarks, this reduces the overhead of setting default
ACLs down to the same overhead as enabling ACLs on a file system
and not using them. Enabling ACLs still introduces a small
overhead (I measure 7% on a -j 2 buildworld with pre-allocated
EA backing store, but this is not rigorous testing, nor in any way
optimized).
- The sysctl will probably change to another administration method
(or at least, a better name) in the near future, but consistency
properties of EAs are still being worked out. The toggle is defined
right now to allow easier performance analysis and exploration
of possible guarantees.
Obtained from: TrustedBSD Project
under heavy use when default ACLs were bgin inherited by new files
or directories. This is done by removing a bug in default ACL
reading, and improving error handling for this failure case:
- Move the setting of the buffer length (len) variable to above the
ACL type (ap->a_type) switch rather than having it only for
ACL_TYPE_ACCESS. Otherwise, the len variable is unitialized in
the ACL_TYPE_DEFAULT case, which generally worked right, but could
result in failure.
- Add a check for a short/long read of the ACL_TYPE_DEFAULT type from
the underlying EA, resulting in EPERM rather than passing a
potentially corrupted ACL back to the caller (resulting "cleaner"
failures if the EA is damaged: right now, the caller will almost
always panic in the presence of a corrupted EA). This code is similar
to code in the ACL_TYPE_ACCESS handling in the previous switch case.
- While I'm fixing this code, remove a redundant bzero() of the ACL
reader buffer; it need only be initialized above the acl_type
switch.
Obtained from: TrustedBSD Project
implementation is still experimental, and while fairly broadly tested,
is not yet intended for production use. Support for POSIX.1e ACLs on
UFS will not be MFC'd to RELENG_4.
This implementation works by providing implementations of VOP_[GS]ETACL()
for FFS, as well as modifying the appropriate access control and file
creation routines. In this implementation, ACLs are backed into extended
attributes; the base ACL (owner, group, other) permissions remain in the
inode for performance and compatibility reasons, so only the extended and
default ACLs are placed in extended attributes. The logic for ACL
evaluation is provided by the fs-independent kern/kern_acl.c.
o Introduce UFS_ACL, a compile-time configuration option that enables
support for ACLs on FFS (and potentially other UFS-based file systems).
o Introduce ufs_getacl(), ufs_setacl(), ufs_aclcheck(), which
respectively get, set, and check the ACLs on the passed vnode.
o Introduce ufs_sync_acl_from_inode(), ufs_sync_inode_from_acl() to
maintain access control information between inode permissions and
extended attribute data.
o Modify ufs_access() to load a file access ACL and invoke
vaccess_acl_posix1e() if ACLs are available on the file system
o Modify ufs_mkdir() and ufs_makeinode() to associate ACLs with newly
created directories and files, inheriting from the parent directory's
default ACL.
o Enable these new vnode operations and conditionally compiled code
paths if UFS_ACL is defined.
A few notes:
o This implementation is fairly widely tested, but still should be
considered experimental.
o Currently, ACLs are not exported via NFS, instead, the summarizing
file mode/etc from the inode is. This results in conservative
protection behavior, similar to the behavior of ACL-nonaware programs
acting locally.
o It is possible that underlying binary data formats associated with
this implementation may change. Consumers of the implementation
should expect to find their local configuration obsoleted in the
next few months, resulting in possible loss of ACL data during an
upgrade.
o The extended attributes interface and implementation is still
undergoing modification to address portable interface concerns, as
well as performance.
o Many applications do not yet correctly handle ACLs. In general,
due to the POSIX.1e ACL model, behavior of ACL-unaware applications
will be conservative with respects to file protection; some caution
is recommended.
o Instructions for configuring and maintaining ACLs on UFS will be
committed in the near future; in the mean time it is possible to
reference the README included in the last UFS ACL distribution
placed in the TrustedBSD web site:
http://www.TrustedBSD.org/downloads/
Substantial debugging, hardware, travel, or connectivity support for this
project was provided by: BSDi, Safeport Network Services, and NAI Labs.
Significant coding contributions were made by Chris Faulhaber. Additional
support was provided by Brian Feldman, Thomas Moestl, and Ilmar Habibulin.
Reviewed by: jedgar, keichii, mckusick, trustedbsd-discuss, freebsd-fs
Obtained from: TrustedBSD Project
which resulted in the output of warning messages at boot if
UFS_EXTATTR_AUTOSTART was enabled but ".attribute" and possible
sub-directories weren't in a mounted MFS or UFS file systems.
Pointed out by: dcs
Obtained from: TrustedBSD Project
(as is done in unmount).
Remove a snapshot inode from the superblock list when its last
name goes away rather than when its last reference goes away.
That way it will be properly reclaimed by fsck after a crash
rather than reenabled when the filesystem is mounted.
is under-tested, and that MFS appears to be in the process of being
deprecated in favor of FFS over md. Note also that UFS_EXTATTR_AUTOSTART
doesn't make much sense on MFS unless the MFSROOT is compiled in, so
manual configuration is generally required.
Obtained from: TrustedBSD Project
options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change
reflects the fact that our EA support is implemented entirely at the
UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount
events). This also better reflects the fact that [shortly] MFS will also
support EAs, as well as possibly IFS.
o Consumers of the EA support in FFS are reminded that as a result, they
must change kernel config files to reflect the new option names.
Obtained from: TrustedBSD Project
off of the file system root: "user" for user attributes, and "system"
for system attributes. When the scan occurs, attribute backing files
discovered in those directories will be started in the respective
namespaces. This re-introduces support for auto-starting of user
attributes, which was removed when the "$" prefix for system attributes
was replaced with explicit namespacing.
For users of the TrustedBSD UFS POSIX.1e ACL code, you'll need to:
mv ${FSROOT}/'$posix1e.acl_access' ${FSROOT}/system/posix1e.acl_access
mv ${FSROOT}/'$posix1e.acl_default' ${FSROOT}/system/posix1e.acl_default
For users of the TrustedBSD POSIX.1e Capability code, you'll need to:
mv ${FSROOT}/'$posix1e.cap' ${FSROOT}/system/posix1e.cap
For users of the TrustedBSD MAC code, you'll need to:
mv ${FSROOT}/'$freebsd.mac' ${FSROOT}/system/freebsd.mac
Updated versions of relevant patches will be released in the near
future.
Obtained from: TrustedBSD Project
introduce a new argument, "namespace", rather than relying on a first-
character namespace indicator. This is in line with more recent
thinking on EA interfaces on various mailing lists, including the
posix1e, Linux acl-devel, and trustedbsd-discuss forums. Two namespaces
are defined by default, EXTATTR_NAMESPACE_SYSTEM and
EXTATTR_NAMESPACE_USER, where the primary distinction lies in the
access control model: user EAs are accessible based on the normal
MAC and DAC file/directory protections, and system attributes are
limited to kernel-originated or appropriately privileged userland
requests.
o These API changes occur at several levels: the namespace argument is
introduced in the extattr_{get,set}_file() system call interfaces,
at the vnode operation level in the vop_{get,set}extattr() interfaces,
and in the UFS extended attribute implementation. Changes are also
introduced in the VFS extattrctl() interface (system call, VFS,
and UFS implementation), where the arguments are modified to include
a namespace field, as well as modified to advoid direct access to
userspace variables from below the VFS layer (in the style of recent
changes to mount by adrian@FreeBSD.org). This required some cleanup
and bug fixing regarding VFS locks and the VFS interface, as a vnode
pointer may now be optionally submitted to the VFS_EXTATTRCTL()
call. Updated documentation for the VFS interface will be committed
shortly.
o In the near future, the auto-starting feature will be updated to
search two sub-directories to the ".attribute" directory in appropriate
file systems: "user" and "system" to locate attributes intended for
those namespaces, as the single filename is no longer sufficient
to indicate what namespace the attribute is intended for. Until this
is committed, all attributes auto-started by UFS will be placed in
the EXTATTR_NAMESPACE_SYSTEM namespace.
o The default POSIX.1e attribute names for ACLs and Capabilities have
been updated to no longer include the '$' in their filename. As such,
if you're using these features, you'll need to rename the attribute
backing files to the same names without '$' symbols in front.
o Note that these changes will require changes in userland, which will
be committed shortly. These include modifications to the extended
attribute utilities, as well as to libutil for new namespace
string conversion routines. Once the matching userland changes are
committed, a buildworld is recommended to update all the necessary
include files and verify that the kernel and userland environments
are in sync. Note: If you do not use extended attributes (most people
won't), upgrading is not imperative although since the system call
API has changed, the new userland extended attribute code will no longer
compile with old include files.
o Couple of minor cleanups while I'm there: make more code compilation
conditional on FFS_EXTATTR, which should recover a bit of space on
kernels running without EA's, as well as update copyright dates.
Obtained from: TrustedBSD Project
"options FFS_EXTATTR". When extended attribute auto-starting
is enabled, FFS will scan the .attribute directory off of the
root of each file system, as it is mounted. If .attribute
exists, EA support will be started for the file system. If
there are files in the directory, FFS will attempt to start
them as attribute backing files for attributes baring the same
name. All attributes are started before access to the file
system is permitted, so this permits race-free enabling of
attributes. For attributes backing support for security
features, such as ACLs, MAC, Capabilities, this is vital, as
it prevents the file system attributes from getting out of
sync as a result of file system operations between mount-time
and the enabling of the extended attribute. The userland
extattrctl tool will still function exactly as previously.
Files must be placed directly in .attribute, which must be
directly off of the file system root: symbolic links are
not permitted. FFS_EXTATTR will continue to be able
to function without FFS_EXTATTR_AUTOSTART for sites that do not
want/require auto-starting. If you're using the UFS_ACL code
available from www.TrustedBSD.org, using FFS_EXTATTR_AUTOSTART
is recommended.
o This support is implemented by adding an invocation of
ufs_extattr_autostart() to ffs_mountfs(). In addition,
several new supporting calls are introduced in
ufs_extattr.c:
ufs_extattr_autostart(): start EAs on the specified mount
ufs_extattr_lookup(): given a directory and filename,
return the vnode for the file.
ufs_extattr_enable_with_open(): invoke ufs_extattr_enable()
after doing the equililent of vn_open()
on the passed file.
ufs_extattr_iterate_directory(): iterate over a directory,
invoking ufs_extattr_lookup() and
ufs_extattr_enable_with_open() on each
entry.
o This feature is not widely tested, and therefore may contain
bugs, caution is advised. Several changes are in the pipeline
for this feature, including breaking out of EA namespaces into
subdirectories of .attribute (this is waiting on the updated
EA API), as well as a per-filesystem flag indicating whether
or not EAs should be auto-started. This is required because
administrators may not want .attribute auto-started on all
file systems, especially if non-administrators have write access
to the root of a file system.
Obtained from: TrustedBSD Project
structure rather than assuming that the device vnode would reside
in the FFS filesystem (which is obviously a broken assumption with
the device filesystem).
An initial tidyup of the mount() syscall and VFS mount code.
This code replaces the earlier work done by jlemon in an attempt to
make linux_mount() work.
* the guts of the mount work has been moved into vfs_mount().
* move `type', `path' and `flags' from being userland variables into being
kernel variables in vfs_mount(). `data' remains a pointer into
userspace.
* Attempt to verify the `type' and `path' strings passed to vfs_mount()
aren't too long.
* rework mount() and linux_mount() to take the userland parameters
(besides data, as mentioned) and pass kernel variables to vfs_mount().
(linux_mount() already did this, I've just tidied it up a little more.)
* remove the copyin*() stuff for `path'. `data' still requires copyin*()
since its a pointer into userland.
* set `mount->mnt_statf_mntonname' in vfs_mount() rather than in each
filesystem. This variable is generally initialised with `path', and
each filesystem can override it if they want to.
* NOTE: f_mntonname is intiailised with "/" in the case of a root mount.
that was introduced in revision 1.80. The problem manifested
itself with a `locking against myself' panic and could also
result in soft updates inconsistences associated with inodedeps.
The two problems are:
1) One of the background operations could manipulate the bitmap
while holding it locked with intent to create. This held lock
results in a `locking against myself' panic, when the background
processing that we have been coopted to do tries to lock the bitmap
which we are already holding locked. To understand how to fix this
problem, first, observe that we can do the background cleanups in
inodedep_lookup only when allocating inodedeps (DEPALLOC is set in
the call to inodedep_lookup). Second observe that calls to
inodedep_lookup with DEPALLOC set can only happen from the following
calls into the softdep code:
softdep_setup_inomapdep
softdep_setup_allocdirect
softdep_setup_remove
softdep_setup_freeblocks
softdep_setup_directory_change
softdep_setup_directory_add
softdep_change_linkcnt
Only the first two of these can come from ffs_alloc.c while holding
a bitmap locked. Thus, inodedep_lookup must not go off to do
request_cleanups when being called from these functions. This change
adds a flag, NODELAY, that can be passed to inodedep_lookup to let
it know that it should not do background processing in those cases.
2) The return value from request_cleanup when helping out with the
cleanup was 0 instead of 1. This meant that despite the fact that
we may have slept while doing the cleanups, the code did not recheck
for the appearance of an inodedep (e.g., goto top in inodedep_lookup).
This lead to the softdep inconsistency in which we ended up with
two inodedep's for the same inode.
Reviewed by: Peter Wemm <peter@yahoo-inc.com>,
Matt Dillon <dillon@earth.backplane.com>
- All processes go into the same array of queues, with different
scheduling classes using different portions of the array. This
allows user processes to have their priorities propogated up into
interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
32. We used to have 4 separate arrays of 32 queues each, so this
may not be optimal. The new run queue code was written with this
in mind; changing the number of run queues only requires changing
constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter. This
is intended to be used to create per-cpu run queues. Implement
wrappers for compatibility with the old interface which pass in
the global run queue structure.
- Group the priority level, user priority, native priority (before
propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
This was used to detect when a process' priority had lowered and
it should yield. We now effectively yield on every interrupt.
- Activate propogate_priority(). It should now have the desired
effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
idle loop. It interfered with propogate_priority() because
the idle process needed to do a non-blocking acquire of Giant
and then other processes would try to propogate their priority
onto it. The idle process should not do anything except idle.
vm_page_zero_idle() will return in the form of an idle priority
kernel thread which is woken up at apprioriate times by the vm
system.
- Update struct kinfo_proc to the new priority interface. Deliberately
change its size by adjusting the spare fields. It remained the same
size, but the layout has changed, so userland processes that use it
would parse the data incorrectly. The size constraint should really
be changed to an arbitrary version number. Also add a debug.sizeof
sysctl node for struct kinfo_proc.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
entry fits within its DIRBLKSIZ block. The surrounding code is
extremely fragile with respect to corruption of the directory entry
'd_reclen' field; if directory corruption occurs, it can blindly
scan forward beyond the end of the filesystem block. Usually this
results in a 'fault on nofault entry' panic.
Directory corruption is now much more likely to be detected, resulting
in a 'ufs_dirbad' panic. If the filesystem is read-only, it will
simply print a warning message, and skip the corrupted block.
Reviewed by: mckusick
in ufs_dirbad(). The mnt_stat.f_flags field is only updated by the
syscalls *statfs and getfsstat, so mnt_flag should be used instead.
This only affects whether or not a panic is generated on detection of
certain types of directory corruption.
Reviewed by: mckusick
filesystem softdep_process_worklist() is called in a loop until it indicates
that no dependancies remain, but the determination of that fact depends on
there only being one softdep_process_worklist() instance running. It was
possible for the syncer to also be running softdep_process_worklist()
and the pre-existing checks in the code to prevent this were not sufficient
to prevent the race. This patch solves the problem.
Approved-by: mckusick
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
idea either) in ufs_extattr_rm.
o More completely fill out the local_aio structure when writing out the
zero'd extended attribute in ufs_extattr_rm -- previoulsy, this worked
fine, but probably should not have. This corrects extraneous warnings
about inconsistent inodes following file deletion.
Reviewed by: jedgar
ufs_extattr_rm.
o Make both reporting locations report the function name where the
inconsistency is discovered, as well as the inode number in question.
Reviewed by: jedgar
attribute read--the offset is required to be 0 by an earlier check,
meaning that it will always be within the scope of the attribute data.
This change should have no impact on executed code paths other than
removing the unnecessary check: please report if any new failures
start to occur as a result.
Obtained from: TrustedBSD Project
in 4.2-REL which I ripped out in -stable and -current when implementing the
low-memory handling solution. However, maxlaunder turns out to be the saving
grace in certain very heavily loaded systems (e.g. newsreader box). The new
algorithm limits the number of pages laundered in the first pageout daemon
pass. If that is not sufficient then suceessive will be run without any
limit.
Write I/O is now pipelined using two sysctls, vfs.lorunningspace and
vfs.hirunningspace. This prevents excessive buffered writes in the
disk queues which cause long (multi-second) delays for reads. It leads
to more stable (less jerky) and generally faster I/O streaming to disk
by allowing required read ops (e.g. for indirect blocks and such) to occur
without interrupting the write stream, amoung other things.
NOTE: eventually, filesystem write I/O pipelining needs to be done on a
per-device basis. At the moment it is globalized.
1) Be more tolerant of missing snapshot files by only trying to decrement
their reference count if they are registered as active.
2) Fix for snapshots of filesystems with block sizes larger than 8K
(from Ollivier Robert <roberto@eurocontrol.fr>).
3) Fix to avoid losing last block in snapshot file when calculating blocks
that need to be copied (from Don Coleman <coleman@coleman.org>).
which fails to set the modification time on the file. The same
check a few lines later takes the correct action.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
by ensuring that newly allocated blocks are zerod. The
race can occur even in the case where the write covers
the entire block.
Reported by: Sven Berkvens <sven@berkvens.net>, Marc Olzheim <zlo@zlo.nu>
Previously, the syncer process was the only process in the
system that could process the soft updates background work
list. If enough other processes were adding requests to that
list, it would eventually grow without bound. Because some of
the work list requests require vnodes to be locked, it was
not generally safe to let random processes process the work
list while they already held vnodes locked. By adding a flag
to the work list queue processing function to indicate whether
the calling process could safely lock vnodes, it becomes possible
to co-opt other processes into helping out with the work list.
Now when the worklist gets too large, other processes can safely
help out by picking off those work requests that can be handled
without locking a vnode, leaving only the small number of
requests requiring a vnode lock for the syncer process. With
this change, it appears possible to keep even the nastiest
workloads under control.
Submitted by: Paul Saab <ps@yahoo-inc.com>
Deal with excessive dirty buffers when msync() syncs non-contiguous
dirty buffers by checking for the case in UFS *before* checking for
clusterability.
in the face of multiple processes doing massive numbers of filesystem
operations. While this patch will work in nearly all situations, there
are still some perverse workloads that can overwhelm the system.
Detecting and handling these perverse workloads will be the subject
of another patch.
Reviewed by: Paul Saab <ps@yahoo-inc.com>
Obtained from: Ethan Solomita <ethan@geocast.com>
Removed most of the hacks that were trying to deal with low-memory
situations prior to now.
The new code is based on the concept that I/O must be able to function in
a low memory situation. All major modules related to I/O (except
networking) have been adjusted to allow allocation out of the system
reserve memory pool. These modules now detect a low memory situation but
rather then block they instead continue to operate, then return resources
to the memory pool instead of cache them or leave them wired.
Code has been added to stall in a low-memory situation prior to a vnode
being locked.
Thus situations where a process blocks in a low-memory condition while
holding a locked vnode have been reduced to near nothing. Not only will
I/O continue to operate, but many prior deadlock conditions simply no
longer exist.
Implement a number of VFS/BIO fixes
(found by Ian): in biodone(), bogus-page replacement code, the loop
was not properly incrementing loop variables prior to a continue
statement. We do not believe this code can be hit anyway but we
aren't taking any chances. We'll turn the whole section into a
panic (as it already is in brelse()) after the release is rolled.
In biodone(), the foff calculation was incorrectly
clamped to the iosize, causing the wrong foff to be calculated
for pages in the case of an I/O error or biodone() called without
initiating I/O. The problem always caused a panic before. Now it
doesn't. The problem is mainly an issue with NFS.
Fixed casts for ~PAGE_MASK. This code worked properly before only
because the calculations use signed arithmatic. Better to properly
extend PAGE_MASK first before inverting it for the 64 bit masking
op.
In brelse(), the bogus_page fixup code was improperly throwing
away the original contents of 'm' when it did the j-loop to
fix the bogus pages. The result was that it would potentially
invalidate parts of the *WRONG* page(!), leading to corruption.
There may still be cases where a background bitmap write is
being duplicated, causing potential corruption. We have identified
a potentially serious bug related to this but the fix is still TBD.
So instead this patch contains a KASSERT to detect the problem
and panic the machine rather then continue to corrupt the filesystem.
The problem does not occur very often.. it is very hard to
reproduce, and it may or may not be the cause of the corruption
people have reported.
Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>)
Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
is to first write the deleted directory entry to disk, second write
the zero'ed inode to disk, and finally to release the freed blocks
and the inode back to the cylinder-group map. As this ordering
requires two disk writes to occur which are normally spaced about
30 seconds apart (except when memory is under duress), it takes
about a minute from the time that a file is deleted until its inode
and data blocks show up in the cylinder-group map for reallocation.
If a file has had only a brief lifetime (less than 30 seconds from
creation to deletion), neither its inode nor its directory entry
may have been written to disk. If its directory entry has not been
written to disk, then we need not wait for that directory block to
be written as the on-disk directory block does not reference the
inode. Similarly, if the allocated inode has never been written to
disk, we do not have to wait for it to be written back either as
its on-disk representation is still zero'ed out. Thus, in the case
of a short lived file, we can simply release the blocks and inode
to the cylinder-group map immediately. As the inode and its blocks
are released immediately, they are immediately available for other
uses. If they are not released for a minute, then other inodes and
blocks must be allocated for short lived files, cluttering up the
vnode and buffer caches. The previous code was a bit too aggressive
in trying to release the blocks and inode back to the cylinder-group
map resulting in their being made available when in fact the inode
on disk had not yet been zero'ed. This patch takes a more conservative
approach to doing the release which avoids doing the release prematurely.
ufs_vnops.c:
1) i_ino was confused with i_number, so the inode number passed to
VFS_VGET() was usually wrong (usually 0U).
2) ip was dereferenced after vgone() freed it, so the inode number
passed to VFS_VGET() was sometimes not even wrong.
Bug (1) was usually fatal in ext2_mknod(), since ext2fs doesn't have
space for inode 0 on the disk; ino_to_fsba() subtracts 1 from the
inode number, so inode number 0U gives a way out of bounds array
index. Bug(1) was usually harmless in ufs_mknod(); ino_to_fsba()
doesn't subtract 1, and VFS_VGET() reads suitable garbage (all 0's?)
from the disk for the invalid inode number 0U; ufs_mknod() returns
a wrong vnode, but most callers just vput() it; the correct vnode is
eventually obtained by an implicit VFS_VGET() just like it used to be.
Bug (2) usually doesn't happen.
<sys/proc.h> to <sys/systm.h>.
Correctly document the #includes needed in the manpage.
Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
the offending inline function (BUF_KERNPROC) on it being #included
already.
I'm not sure BUF_KERNPROC() is even the right thing to do or in the
right place or implemented the right way (inline vs normal function).
Remove consequently unneeded #includes of <sys/proc.h>
"administrative" authorization checks. In most cases, the VADMIN test
checks to make sure the credential effective uid is the same as the file
owner.
o Modify vaccess() to set VADMIN as an available right if the uid is
appropriate.
o Modify references to uid-based access control operations such that they
now always invoke VOP_ACCESS() instead of using hard-coded policy checks.
o This allows alternative UFS policies to be implemented by replacing only
ufs_access() (such as mandatory system policies).
o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the
vnode: I believe that new invocations of VOP_ACCESS() are always called
with the lock held.
o Some direct checks of the uid remain, largely associated with the QUOTA
and SUIDDIR code.
Reviewed by: eivind
Obtained from: TrustedBSD Project
description:
How it works:
--
Basically ifs is a copy of ffs, overriding some vfs/vnops. (Yes, hack.)
I didn't see the need in duplicating all of sys/ufs/ffs to get this
off the ground.
File creation is done through a special file - 'newfile' . When newfile
is called, the system allocates and returns an inode. Note that newfile
is done in a cloning fashion:
fd = open("newfile", O_CREAT|O_RDWR, 0644);
fstat(fd, &st);
printf("new file is %d\n", (int)st.st_ino);
Once you have created a file, you can open() and unlink() it by its returned
inode number retrieved from the stat call, ie:
fd = open("5", O_RDWR);
The creation permissions depend entirely if you have write access to the
root directory of the filesystem.
To get the list of currently allocated inodes, VOP_READDIR has been added
which returns a directory listing of those currently allocated.
--
What this entails:
* patching conf/files and conf/options to include IFS as a new compile
option (and since ifs depends upon FFS, include the FFS routines)
* An entry in i386/conf/NOTES indicating IFS exists and where to go for
an explanation
* Unstaticize a couple of routines in src/sys/ufs/ffs/ which the IFS
routines require (ffs_mount() and ffs_reload())
* a new bunch of routines in src/sys/ufs/ifs/ which implement the IFS
routines. IFS replaces some of the vfsops, and a handful of vnops -
most notably are VFS_VGET(), VOP_LOOKUP(), VOP_UNLINK() and VOP_READDIR().
Any other directory operation is marked as invalid.
What this results in:
* an IFS partition's create permissions are controlled by the perm/ownership of
the root mount point, just like a normal directory
* Each inode has perm and ownership too
* IFS does *NOT* mean an FFS partition can be opened per inode. This is a
completely seperate filesystem here
* Softupdates doesn't work with IFS, and really I don't think it needs it.
Besides, fsck's are FAST. (Try it :-)
* Inodes 0 and 1 aren't allocatable because they are special (dump/swap IIRC).
Inode 2 isn't allocatable since UFS/FFS locks all inodes in the system against
this particular inode, and unravelling THAT code isn't trivial. Therefore,
useful inodes start at 3.
Enjoy, and feedback is definitely appreciated!
it is defined whenm used in ufs_extattr_uepm_destroy(), fixing a panic
due to a NULL pointer dereference.
Submitted by: Wesley Morgan <morganw@chemicals.tacorp.com>
up lock on extattrs.
o Get for free a comment indicating where auto-starting of extended
attributes will eventually occur, as it was in my commit tree also.
No implementation change here, only a comment.
call, which should be the last thing down to a per-mount extattr
management structure, after ufs_extattr_stop() on the file system.
This currently has the effect only of destroying the per-mount lock
on extended attributes, and clearing appropriate flags.
o Remove inappropriate invocation in ufs_extattr_vnode_inactive().
Add lockdestroy() and appropriate invocations, which corresponds to
lockinit() and must be called to clean up after a lockmgr lock is no
longer needed.
separately (nfs, cd9660 etc) or keept as a first element of structure
referenced by v_data pointer(ffs). Such organization leads to known problems
with stacked filesystems.
From this point vop_no*lock*() functions maintain only interlock lock.
vop_std*lock*() functions maintain built-in v_lock structure using lockmgr().
vop_sharedlock() is compatible with vop_stdunlock(), but maintains a shared
lock on vnode.
If filesystem wishes to export lockmgr compatible lock, it can put an address
of this lock to v_vnlock field. This indicates that the upper filesystem
can take advantage of it and use single lock structure for entire (or part)
of stack of vnodes. This field shouldn't be examined or modified by VFS code
except for initialization purposes.
Reviewed in general by: mckusick
on directories.
o Allow privileged processes in jail() to create inodes with the
setgid bit set even if they are not a member of the group denoted
by the file creation gid. This occurs due to inherited gid's from
parent directories on file creation, allowing a user to create a
file with a gid that is not in the creating process's credentials.
Obtained from: TrustedBSD Project
and UFS file flags. Here's what the comment says, for reference:
Privileged processes in jail() are permitted to modify
arbitrary user flags on files, but are not permitted
to modify system flags.
In other words, privilege does allow a process in jail to modify user
flags for objects that the process does not own, but privilege will
not permit the setting of system flags on the file.
Obtained from: TrustedBSD Project
remove the setuid/setgid bits by virtue of a change to a file with those
bits set, even if the process doesn't own the file, or isn't a group
member of the file's gid.
Obtained from: TrustedBSD Project
safe as suser() no longer sets ASU.
o Note that in some cases, the PRISON_ROOT flag is used even though no
process structure is passed, to indicate that if a process structure
(and hence jail) was available, it would be ok. In the long run,
the jail identifier should probably be moved to ucred, as the uidinfo
information was.
o Some uid 0 checks remain relating to the quota code, which I'll leave
for another day.
Reviewed by: phk, eivind
Obtained from: TrustedBSD Project
filesystem lookup() routine if it unlocks parent directory. This flag should
be carefully tracked by filesystems if they want to work properly with nullfs
and other stacked filesystems.
VFS takes advantage of this flag to perform symantically correct usage
of vrele() instead of vput() if parent directory already unlocked.
If filesystem fails to track this flag then previous codepath in VFS left
unchanged.
Convert UFS code to set PDIRUNLOCK flag if necessary. Other filesystmes will
be changed after some period of testing.
Reviewed in general by: mckusick, dillon, adrian
Obtained from: NetBSD
- In ufs_extattr_enable(), return EEXIST instead of EOPNOTSUPP
if the caller tries to configure an attribute name that is
already configured
- Throughout, add IO_NODELOCKED to VOP_{READ,WRITE} calls to
indicate lock status of passed vnode. Apparently not a
problem, but worth fixing.
- For all writes, make use of IO_SYNC consistent. Really,
IO_UNIT and combining of VOP_WRITE's should happen, but I
don't have that tested. At least with this, it's
consistent usage. (pointed out by: bde)
- In ufs_extattr_get(), fixed nested locking of backing
vnode (fine due to recursive lock support, but make it
more consistent with other code)
- In ufs_extattr_get(), clean up return code to set uio_resid
more consistently with other pieces of code (worked fine,
this is just a cleanup)
- Fix ufs_extattr_rm(), which was broken--effectively a nop.
- Minor comment and whitespace fixes.
Obtained from: TrustedBSD Project
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
attribute namespace and DAC protection on file:
- Attribute names beginning with '$' are in the system namespace
- The attribute name "$" is reserved
- System namespace attributes may only be read/set by suser()
or by kernel (cred == NULL)
- Other attribute names are in the application namespace
- The attribute name "" is reserved
- Application namespace attributes are protected in the manner
of the target file permission
o Kernel changes
- Add ufs_extattr_valid_attrname() to check whether the requested
attribute "set" or "enable" is appropriate (i.e., non-reserved)
- Modify ufs_extattr_credcheck() to accept target file vnode, not
to take inode uid
- Modify ufs_extattr_credcheck() to check namespace, then enforce
either kernel/suser for system namespace, or vaccess() for
application namespace
o EA backing file format changes
- Remove permission fields from extended attribute backing file
header
- Bump extended attribute backing file header version to 3
o Update extattrctl.c and extattrctl.8
- Remove now deprecated -r and -w arguments to initattr, as
permissions are now implicit
- (unrelated) fix error reporting and unlinking during failed
initattr to remove duplicate/inaccurate error messages, and to
only unlink if the failure wasn't in the backing file open()
Obtained from: TrustedBSD Project
object before falling back on privilege. Make vaccess() accept an
additional optional argument, privused, to determine whether
privilege was required for vaccess() to return 0. Add commented
out capability checks for reference. Rename some variables to make
it more clear which modes/uids/etc are associated with the object,
and which with the access mode.
o Update file system use of vaccess() to pass NULL as the optional
privused argument. Once additional patches are applied, suser()
will no longer set ASU, so privused will permit passing of
privilege information up the stack to the caller.
Reviewed by: bde, green, phk, -security, others
Obtained from: TrustedBSD Project
Remove old DEVFS support fields from dev_t.
Make uid, gid & mode members of dev_t and set them in make_dev().
Use correct uid, gid & mode in make_dev in disk minilayer.
Add support for registering alias names for a dev_t using the
new function make_dev_alias(). These will show up as symlinks
in DEVFS.
Use makedev() rather than make_dev() for MFSs magic devices to prevent
DEVFS from noticing this abuse.
Add a field for DEVFS inode number in dev_t.
Add new DEVFS in fs/devfs.
Add devfs cloning to:
disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
md(4), tun(4), bpf(4), fd(4)
If DEVFS add -d flag to /sbin/inits args to make it mount devfs.
Add commented out DEVFS to GENERIC
This allows ffs_fsync() to break out of a loop that might otherwise
be infinite on kernels compiled without the SOFTUPDATES option.
The observed symptom was a system hang at the first unmount attempt.
the SF_IMMUTABLE flag to prevent writing. Instead put in explicit
checking for the SF_SNAPSHOT flag in the appropriate places. With
this change, it is now possible to rename and link to snapshot files.
It is also possible to set or clear any of the owner, group, or
other read bits on the file, though none of the write or execute
bits can be set. There is also an explicit test to prevent the
setting or clearing of the SF_SNAPSHOT flag via chflags() or
fchflags(). Note also that the modify time cannot be changed as
it needs to accurately reflect the time that the snapshot was taken.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
with the new snapshot code.
Update addaliasu to correctly implement the semantics of the old
checkalias function. When a device vnode first comes into existence,
check to see if an anonymous vnode for the same device was created
at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than
creating a new vnode for the device. This corrects a problem which
caused the kernel to panic when taking a snapshot of the root
filesystem.
Change the calling convention of vn_write_suspend_wait() to be the
same as vn_start_write().
Split out softdep_flushworklist() from softdep_flushfiles() so that
it can be used to clear the work queue when suspending filesystem
operations.
Access to buffers becomes recursive so that snapshots can recursively
traverse their indirect blocks using ffs_copyonwrite() when checking
for the need for copy on write when flushing one of their own indirect
blocks. This eliminates a deadlock between the syncer daemon and a
process taking a snapshot.
Ensure that softdep_process_worklist() can never block because of a
snapshot being taken. This eliminates a problem with buffer starvation.
Cleanup change in ffs_sync() which did not synchronously wait when
MNT_WAIT was specified. The result was an unclean filesystem panic
when doing forcible unmount with heavy filesystem I/O in progress.
Return a zero'ed block when reading a block that was not in use at
the time that a snapshot was taken. Normally, these blocks should
never be read. However, the readahead code will occationally read
them which can cause unexpected behavior.
Clean up the debugging code that ensures that no blocks be written
on a filesystem while it is suspended. Snapshots must explicitly
label the blocks that they are writing during the suspension so that
they do not cause a `write on suspended filesystem' panic.
Reorganize ffs_copyonwrite() to eliminate a deadlock and also to
prevent a race condition that would permit the same block to be
copied twice. This change eliminates an unexpected soft updates
inconsistency in fsck caused by the double allocation.
Use bqrelse rather than brelse for buffers that will be needed
soon again by the snapshot code. This improves snapshot performance.
attribute data size.
o Fortunately it turned out to be an unused constant left over from an
earlier implementation, and is therefore being removed so as not to
confuse casual observers.
Submitted by: mbendiks@eunet.no
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.
Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
in mount.h instead of ffs_extern.h. The correct solution is to use
an indirect function pointer so that the kernel does not have to be
built with options FFS, but that will be left for another day.
advance preparation for them to get migrated into place so that
subsequent changes in utilities will not fail to compile for lack
of up-to-date header files in /usr/include.
after the acquisition of any advisory locks. This fix corrects a case
in which a process tries to open a file with a non-blocking exclusive
lock. Even if it fails to get the lock it would still truncate the
file even though its open failed. With this change, the truncation
is done only after the lock is successfully acquired.
Obtained from: BSD/OS
the system would panic when a user's inode quota was exceeded (see
PR 18959 for details). This fixes that problem.
PR: 18959
Submitted by: Jason Godsey <jason@unixguy.fidalgo.net>
check to see if it has been committed to disk. If it has never
been written, it can be freed immediately. For short lived files
this change allows the same inode to be reused repeatedly.
Similarly, when upgrading a fragment to a larger size, if it
has never been claimed by an inode on disk, it too can be freed
immediately making it available for reuse often in the next slowly
growing block of the same file.
if an FFS partition returns EOPNOTSUPP, as it just means extended
attributes weren't enabled on that partition. Prevents spurious
warning per-partition at shutdown.
<sys/bio.h>.
<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.
Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.
Still a few bogus uses of struct buf to track down.
Repocopy by: peter
provide locking over extended attribute operations, requiring that
individual operations be atomic. Allowing non-zero starting offsets
permits applications/etc to put themselves at risk for inconsistent
behavior. As VOP_SETEXTATTR already prohibited non-zero write offsets,
this makes sense.
Suggested by: Andreas Gruenbacher <a.gruenbacher@bestbits.at>
reset their grace timer as their ownership crossed the soft limit
threshhold. Thus if they had been over their limit in the past,
they were suddenly penalized as if they had been over their limit
ever since. The fix is to check when root gives away files, that
when the receiving user crosses their soft limit, their grace timer
is reset. See the PR report for a detailed method of reproducing
the bug.
PR: kern/17128
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
Reviewed by: Kirk McKusick <mckusick@mckusick.com>
chances of consistency with other file/directory meta-data in a
write. In the current set of extended attribute applications,
this does not hurt much. This should be discussed again later when
it comes time to optimize performance of attributes.
o Include an inode generation number in the per-attribute header
information. This allows consistency verification to catch when
a crash occurs, or an inode is recycled while attributes are not
properly configured. For now, an irritating error message is
displayed when an inconsistency occurs. At some point, may introduce
an ``extattrctl check ...'' which catches these before attributes
are enabled. Not today. If you get this message, it means you
somehow managed to get your attribute backing file out of synch
with the file system. When this occurs, attribute not found is
returned (== undefined). Writes will overwrite the value there
correcting the problem. Might want to think about introducing
a new errno or two to handle this kind of situation.
Discussed with: kris
o Put back in {} removed during over-zealous cleanup of gratuitous
debugging output during preparation for the commit. Due to the
missing {}, writes on extended attributes always silently failed.
Doh.
o Don't unlock the target vnode if it's the backing vnode, as we
don't lock the target vnode if it's the backing vnode.
Exceptions:
Vinum untouched. This means that it cannot be compiled.
Greg Lehey is on the case.
CCD not converted yet, casts to struct buf (still safe)
atapi-cd casts to struct buf to examine B_PHYS
(name, value) pairs to be associated with inodes. This support is
used for ACLs, MAC labels, and Capabilities in the TrustedBSD
security extensions, which are currently under development.
In this implementation, attributes are backed to data vnodes in the
style of the quota support in FFS. Support for FFS extended
attributes may be enabled using the FFS_EXTATTR kernel option
(disabled by default). Userland utilities and man pages will be
committed in the next batch. VFS interfaces and man pages have
been in the repo since 4.0-RELEASE and are unchanged.
o ufs/ufs/extattr.h: UFS-specific extattr defines
o ufs/ufs/ufs_extattr.c: bulk of support routines
o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes
o contrib/softupdates/ffs_softdep.c: extattr.h includes
o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR
o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h
(This should not be the case, and will be fixed in a future commit)
Currently attributes are not supported in MFS. This will be fixed.
Reviewed by: adrian, bp, freebsd-fs, other unthanked souls
Obtained from: TrustedBSD Project
devstat_end_transaction_bio()
bioq_* versions of bufq_* incl bioqdisksort()
the corresponding "buf" versions will disappear when no longer used.
Move b_offset, b_data and b_bcount to struct bio.
Add BIO_FORMAT as a hack for fd.c etc.
We are now largely ready to start converting drivers to use struct
bio instead of struct buf.
(Much of this done by script)
Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.
Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.
Add bio_queue field for struct bio aware disksort.
Address a lot of stylistic issues brought up by bde.
async I/O's. The sequential read heuristic has been extended to
cover writes as well. We continue to call cluster_write() normally,
thus blocks in the file will still be reallocated for large (but still
random) I/O's, but I/O will only be initiated for truely sequential
writes.
This solves a number of annoying situations, especially with DBM (hash
method) writes, and also has the side effect of fixing a number of
(stupid) benchmarks.
Reviewed-by: mckusick
substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo)
substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo)
This patch is machine generated except for the ccd.c and buf.h parts.
field in struct buf: b_iocmd. The b_iocmd is enforced to have
exactly one bit set.
B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.
Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.
Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue. It is likely to write on your disk
where it should have been reading.
This change is a step in the direction towards a stackable BIO capability.
A lot of this patch were machine generated (Thanks to style(9) compliance!)
Vinum users: Greg has not had time to test this yet, be careful.
the unwary if the code were called in slightly different ways.
1) In ufs_bmaparray() the code for calculating 'runb' will stop one block
short of the first entry in an indirect block. i.e. if an indirect block
contains N block numbers b[0]..b[N-1] then the code will never check if
b[0] and b[1] are sequential. For reference, compare with the equivalent
code that deals with direct blocks.
2) In ufs_lookup() there is an off-by-one error in the test that checks
if dp->i_diroff is outside the range of the the current directory size.
This is completely harmless, since the following while-loop condition
'dp->i_offset < endsearch' is never met, so the code immediately
does a second pass starting at dp->i_offset = 0.
3) Again in ufs_lookup(), the condition in a sanity check is wrong
for directories that are longer than one block. This bug means that
the sanity check is only effective for small directories.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
being accessed after the bp had been releaed. A simple move of the
brelse() solves the problem.
Approved by: jkh
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
filesystem fills up. If the first indirect block exists and FFS is able
to allocate deeper indirect blocks, but is not able to allocate the
data block, FFS improperly unwinds the indirect blocks and leaves a
block pointer hanging to a freed block. This will cause a panic later
when the file is removed. The solution is to properly account for the
first block-pointer-to-an-indirect-block we had to create in a balloc
operation and then unwind it if a failure occurs.
Detective work by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: mckusick, Ian Dowse <iedowse@maths.tcd.ie>
Approved by: jkh
to the current jail/chflags interactions. This fix conditionalizes ``root
behavior'' in the chflags() case on not being in jail, so attempts to
perform a chflags in a jail are limited to what a normal user could do.
For example, this does allow setting of user flags as appropriate, but
prohibits changing of system flags.
Reviewed by: bde
a mess in securelevel environments. Results in one warning during
/etc/rc as it attempts to remove file flags, but this is harmless.
Approved by: High Lord Hubbard
have a write in progress. Otherwise one can get in an infinite loop
trying to get them all flushed.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
set of restrictions for cancelling an inode dependency (inodedep)
is somewhat stronger than originally coded. Since this check appears
in two places, we codify it into the function check_inode_unwritten
which we then call from the two sites, one freeing blocks and the
other freeing directory entries.
Submitted by: Steinar Haug via Matthew Dillon
so that they never try to lock an inode corresponding to ".." as this
can lead to deadlock. We observe that any inode with an updated link count
is always pushed into its buffer at the time of the link count change, so
we do not need to do a VOP_UPDATE, but merely find its buffer and write it.
The only time we need to get the inode itself is from the result of a
mkdir whose name will never be ".." and hence locking such an inode will
never request a lock above us in the filesystem tree. Thanks to Brian
Fundakowski Feldman for providing the test program that tickled soft updates
into hanging in "inode" sleep.
Submitted by: Brian Fundakowski Feldman <green@FreeBSD.org>
to sleep). Locking 101, part 2: do not look at buffer contents after
you have been asleep. There is no telling what wonderous changes may
have occurred.
This seems to be responsible for a bunch of panics where the process
sleeps and something else finds softupdates "locked" when it shouldn't
be. This commit is unreviewed, but has been a big help here.
Previously my boxes would panic pretty much on the first fsync() that
wrote something to disk.
it is no longer sufficient to get a lock on a buffer to know
that its write has been completed. We have to first get the
lock on the buffer, then check to see if it is doing a
background write. If it is doing background write, we have
to wait for the background write to finish, then check to see
if that fullfilled our dependency, and if not to start another
write. Luckily the explanation is longer than the fix.
a vnode has not been written (which would clear certain of its
dependencies). The problems arises because fsync with MNT_NOWAIT
no longer pushes all the dirty blocks associated with a vnode. It
skips those that require rollbacks, since they will just get instantly
dirty again. Such skipped blocks are marked so that they will not be
skipped a second time (otherwise circular dependencies would never
clear). So, we fsync twice to ensure that everything will be written
at least once.
The problem occurs when an indirect block and a data block are
being allocated at the same time. For example when the 13th block
of the file is written, the filesystem needs to allocate the first
indirect block and a data block. If the indirect block allocation
succeeds, but the data block allocation fails, the error code
dellocates the indirect block as it has nothing at which to point.
Unfortunately, it does not deallocate the indirect block's associated
dependencies which then fail when they find the block unexpectedly
gone (ptr == 0 instead of its expected value). The fix is to fsync
the file before doing the block rollback, as the fsync will flush
out all of the dependencies. Once the rollback is done the file
must be fsync'ed again so that the soft updates code does not find
unexpected changes. This approach is much slower than writing the
code to back out the extraneous dependencies, but running out of
disk space is not expected to be a common occurence, so just getting
it right is the main criterion.
PR: kern/15063
Submitted by: Assar Westerlund <assar@stacken.kth.se>
have been cleaned up by deallocte_dependencies(). Once that is done, it
is safe to post the request to free the blocks. A similar change is also
needed for the freefile case.
1) Fastpath deletions. When a file is being deleted, check to see if it
was so recently created that its inode has not yet been written to
disk. If so, the delete can proceed to immediately free the inode.
2) Background writes: No file or block allocations can be done while the
bitmap is being written to disk. To avoid these stalls, the bitmap is
copied to another buffer which is written thus leaving the original
available for futher allocations.
3) Link count tracking. Constantly track the difference in i_effnlink and
i_nlink so that inodes that have had no change other than i_effnlink
need not be written.
4) Identify buffers with rollback dependencies so that the buffer flushing
daemon can choose to skip over them.
of dirrem structure rather than the collaterally created freeblks
and freefile structures. Limit the rate of buffer dirtying by the
syncer process during periods of intense file removal.
check before the inode is unlocked while grabbing its parent directory.
Once it is unlocked, other operations may slip in that could make
the inode-is-flushed check fail. Allowing other writes to the inode
before returning from fsync does not break the semantics of fsync
since we have flushed everything that was dirty at the time of the
fsync call.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
when I made the absence of the clean flag sticky in rev.1.88. This
was a problem main for "mount /". There is no way to mount "/" for
writing without using mount -u (normally implicitly), so after
"mount -f /" of an unclean filesystem, the absence of the clean flag
was sticky forever.
