The firmware/hardware does not generate additional completion
events unless we post new buffers. Use a timer to try to post
more buffers in case we are temporarily out of mbufs. Else
the receive schedule completely stops.
Sponsored by: Mellanox Technologies
MFC after: 1 week
When mlx5e_sq_xmit() returns an error code and the mbuf pointer is set,
we should not free the mbuf, because the caller will keep the mbuf in
the drbr. Make sure the mbuf pointer is correctly set upon function
exit.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The hardware MTU size can't be set to a value less than 1500 bytes due
to side-band management support. Allow setting the software MTU size
below 1500 bytes, thus creating a mismatch between hardware and
software MTU sizes.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Try to reuse code to setup sendqueues when possible by making some static
functions global. Further split the mlx5e_close_sq_wait() function to
separate out reusable parts.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change also reduces the size of the mlx5e_sq structure so that the last
queue_state element will fit into the previous cacheline and then the mlx5e_sq
structure becomes one cacheline less for amd64.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Make some functions and structures global to allow for code reuse
when creating rate limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Move setting of CQ moderation mode together with the other
CQ moderation parameters. Pass completion event vector as
a separate argument to mlx5e_open_cq(), because its value is
different for each call. Pass mlx5e_priv pointer instead of
mlx5e_channel pointer so that code can be used by rate
limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change allows for reusing the transmit path for so called
rate limited senqueues. While at it optimise some pointer lookups
in the fast path.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Clear the device description to avoid use after free because the
bsddev is not destroyed when the mlx5en module is unloaded. Only when
the parent mlx5 module is unloaded the bsddev is destroyed. This fixes
a panic on listing sysctls which refer strings in the bsddev after the
mlx5en module has been unloaded.
Sponsored by: Mellanox Technologies
MFC after: 1 week
driver. This change significantly increases the overall RX aggregation
ratio for heavily loaded networks handling 10-80 thousand simultaneous
connections.
Remove the turbo LRO code and all references to it which has now been
superceeded by the tcp_lro_queue_mbuf() function.
Tested by: Netflix
Sponsored by: Mellanox Technologies
MFC after: 1 week
This patch adds the missing pieces needed for device setup using the
mlx5en driver inside a virtual machine which is providing hardware
access through SR-IOV.
Sponsored by: Mellanox Technologies
MFC after: 1 week
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Store the last doorbell write in the mlx5e_sq structure and write the
doorbell to the hardware when the transmit routine finishes
transmitting all queued mbufs.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
This patch implements a sysctl which allows setting a factor, N, for
how many work queue elements can be generated before requiring a
completion event. When a completion event happens the code simulates N
completion events instead of only one. When draining a transmit queue,
N-1 NOPs are transmitted at most, to force generation of the final
completion event. Further a timer is running every HZ ticks to flush
any remaining data off the transmit queue when the tx_completion_fact
> 1.
The goal of this feature is to reduce the PCI bandwidth needed when
transmitting data.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
after changing the HW LRO sysctl when previously in up state.
Reviewed by: gnn
Sponsored by: Mellanox Technologies
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D4941
coalescing and zipping multiple CQEs into a single merged CQE. The
feature is enabled by default and can be disabled by a sysctl.
Implementing this feature mlx5_cqwq_pop() has been separated from
mlx5e_get_cqe().
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Differential Revision: https://reviews.freebsd.org/D4598
Sponsored by: Mellanox Technologies
include the following list of changes:
- Added eswitch ACL table management
Introduce API for managing ACL table.
This API include the following features:
1) vlan filter - for VST/VGT+ support.
2) spoofcheck.
3) robust functionality to allow/drop general untagged/tagged traffic.
4) support for both ingress and egress ACL types.
- Added loopback filter to the vacl table.
- Added multicast list set in the vPort context
- Added promiscuous mode set in the vPort context
- Set the vlan list in vPort context
1) Check caps if VLAN list is not longer than FW supports
2) Set MODIFY_NIC_VPORT_CONTEXT command
- Changed MLX5_EEPROM_MAX_BYTES from 48 to 32 so that a single EEPROM
reading cannot cross the 128-byte boundary. Previously reading the
MCIA register was done in batches of 48 bytes. The third reading
would then by-pass the 127th byte, which means that part of the low
page and part of the high page would be read at the same time, which
created a bug:
1st: 0-47 bytes
2nd: 48-95 bytes
3rd: 96-143 bytes
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4411
driver. This includes binding all interrupt and worker threads
according to the RSS configuration, setting up correct Toeplitz
hashing keys as given by RSS and setting the correct mbuf
hashtype for all received traffic.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4410
completion events can be moderated in the same way like RX completion
events. Expose this functionality by a sysctl variable.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4409
Set the port MTU and then query it and report if any problems instead.
MFC after: 1 week
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4408
RX buffers from number of received packets.
Differential Revision: https://reviews.freebsd.org/D4178
Submitted by: Drew Gallatin <gallatin@freebsd.org>
Sponsored by: Mellanox Technologies
MFC after: 3 days
Setting sysctl dev....conf.hw_lro may fail if the net device lro is
turned off. Due to the nature of our sysctl handler we need to set the
values back to 0 and issue an error.
Differential Revision: https://reviews.freebsd.org/D4177
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
MFC after: 3 days
