invariants/witness/etc on i386, sparc64, amd64 and alpha for GENERIC.
Lint probably still needs fixing, as do a couple of other drivers
that have broken recently and not been noticed.
in ntfs_writentvattr_plain and ntfs_readntvattr_plain, and purge the boot
block from the buffer cache if isn't exactly one cluster long. These two
changes work around the same buffer cache bug that ntfs_subr.c 1.30 tried
to, but in a different way. This may decrease throughput by reading smaller
amounts of data from the disk at a time, but may increase it by avoiding
bogus writes of clean buffers.
Problem (re)reported by Karel J. Bosschaart on -current.
switching anymore, so there's no need to save and restore GP. This
change breaks threaded applications linked against libc_r. Pull the
tier 2 card again: relink. This will link against libthr instead.
the "do-nothing" versions of __RCSID(), __RCSID_SOURCE(), __SCCSID(),
and __COPYRIGHT() were not strictly correct. They should not expand
into [nothing], because the ';' which follows them would then cause
a syntax error (in a strict C compiler, if not gcc...).
So, change the do-nothing versions of those macros to use the
'struct __hack' tactic, as was already used with __FBSDID().
Approved by: discussions with bde
MFC after: 1 week
on i486's (and probably i386's), but it has had very little effect
since gcc-2.7 or gcc-2.95. With gcc-3.3, it gave a small
pessimization for at least i386's, athlon-xp's and pentium4's, a
small optimization (I think) for pentium1's, and made no difference
for i386's. (movzbl is best for all the later processors, and the
micro-optimization was to stop it being used on i486's.)
a non-standard construct. Instead, redefine struct _ia64_fpreg as a
union and put a long double in it. On ia64 and for LP64, this is
defined by the ABI to have 16-byte alignment. For ILP32 a long double
has 4-byte alignment, but we don't support ILP32.
Note that the in-memory image of a long double does not match the in-
memory image of spilled FP registers. This means that one cannot use
the fpr_flt field to interpet the bits. For this reason we continue
to use an aggregate type.
connections. While this confuses tcpdump, it enables other applications
to see and analyze non-IP traffic (signalling, for example).
Pointed out by: Vincent Jardin <vjardin@wanadoo.fr>
OID as the other protocol family sub-trees do, that is equal to the
protocol family identifier. Make the ATM layer debugging flags
available under this tree.
Submitted by: Vincent Jardin <vjardin@wanadoo.fr>
MFC after: 2 weeks
set an initial value. This is aimed at getting us closer to being able to
turn -Werror back on and we can adjust the settings later on. Yes, we
could turn off -Wno-inline instead, but that would hide the effect of
gcc's bogo-estimator ignoring inline (either rightly or wrongly).
written as a template that when inlined is specialized for the caller
through constant value propagation and dead code elimination. Thus,
the specialized code that is generated for pmap_clear_reference() et
al. avoids several conditional branches inside of a loop.
fields in the low 32 bits of the local APIC ICR register. Use this macro
in place of APIC_RESV2_MASK when masking off existing bits from the ICR
when writing to it to send an IPI.
Tested by: scottl
but this just created a weird inconsistency when porting gdb(1).
Instead, we name each high FP register seperately, like we do for
all the other registers.
__attribute__((__always_inline__)) by adding an __always_inline macro
(used like __dead2 etc). __inline_damnit has also been suggested but we
have a precedent of keeping the names similar so they are easier to find.
These were a left over from when the private memory pools were
converted to use uma zones. The limit of UMA zones, however,
works differently. When a zone is limited to only one or two pages
than, on multi-cpu systems, processes can get stuck on the zonelimit,
because all remaining free items are in caches of other CPUs.
Also add rudimentary error handling in some places (panic) when a zone
cannot be created.
AMD64, gcc (and the ABI) expects the x87 unit to be running in 80/64
mode (not 64/53) so that it can use it for 'long double' operations. It
takes the expected precision differences into account when generating
code.
the SSE mxcsr register as well. Since gcc will intermix SSE2 and x87
FP code, the fpsetround() etc mode had better be the same.
There are hooks to enable these inlines to be instantiated inside libc
for non-gcc or C++ callers. (g++ doesn't like the inlines that tried
to extract an integer and convert it to an enum).
sis_ioctl() was called, so one had to use ifconfig each time the cable got
plugged in to be able to use the connection.
Do it a better way now, add a "in_tick" field in the softc structure,
call timeout() in sis_tick() and don't call it in sis_init() if in_tick is
non-zero.
Reported by: Landmark Networks
Pointy hat to: cognet
newer lucent/hermes firmware than indicated (investigating). I'm committing
this now since it shouldn't hurt anything.
o Vaguely related, add bogus frame length check from netbsd.
Obtained from: netbsd
LAZY_SWITCH changes. He pointed out the acpi code sets up an identity
mapping in the current vmspace and that got messed up by the %cr3 being
out of sync with the current page directory. As a workaround, restore
%cr3 across the sleep/resume. A more complete fix would be to undo the
lazy state and clear the pm_active bit from the borrowed pmap, but this
works and people are currently hurting. I'll clean this up.
This is mostly Ian's patch, plus a PAE tweak from me.
that an argument is not a NULL pointer.
Apply various obvious places.
I belive __printf*() implies __nonnull() so it is not needed on functions
already tagged that way.
it attaches to all existing NATM network interfaces in the system
and creates a HARP physical interface for each of them. This allows
us to use the same set of ATM drivers for all ATM stuff. It is
possible to use the same interface for HARP, NATM and netgraph at the
same time.
go looking for free fragments won't match. Since we never free this, we
can "throw away" the tag. This is very dirty, and needs to be reimplemented
properly, but fixes performance problems with uhci.
Also assert that when we overlay a structure on some space, that the
space is large enough for the structure.
override in their sub-class; this eliminates the hack of interpreting the
EINPROGRESS return value to mean "don't do any of the normal work"
o correct active scanning so the first channel is only scanned once and so
per-channel passive mode is properly honored
o expose 802.11 FSM state names so every driver doesn't keep a private copy
o eliminate node parameter to ieee80211_begin_scan; it was not being used
namespace. To compensate for it only being used in the !ECDT case, use
a more robust approach to indicate a device was probed via ECDT by setting
the private ivar to be &acpi_ec_devclass. Without the acpi_MatchHid() call
now, it might have been possible for a non-EC device to have had its magic
match our previous flag.
Pointed out by: takawata
to EcGpeQueryHandler on to any waiting threads through the softc. Similar
behavior was in the original version.
Also:
* Merge EcQuery into EcGpeQueryHandler to simplify locking
* Hold EcLock from the initial read of the CSR down to the wakeup or
until after the query command has been processed.
* ec_gpebit only needs to be a UINT8
namespace has been evaluated. Machines with ACPI 2.0 expect this behavior
and have AML which calls EC functions early in the boot process. If the
ECDT is not available, fall back to original probe behavior.
Other minor changes:
* Add GPE bit and GLK usage to the device announcement
* Always use the global lock in the ECDT case, but potentially downgrade to
not using it if _GLK is 0 once the namespace is available. This is
announced with "Changing GLK from 1 to 0"
* Remove the acpi_object_list definitions which were earlier deprecated
Ideas from: takawata
comes across it, it will turn into a core dump in userland instead of
a kernel panic. I had also inverted the sense of the test, so
Double pointy hat to: mtm
- Make m_prepend use m_gethdr instead of m_get where
appropriate
- Make m_copym use m_gethdr instead of m_get where
appropriate
- Add a call to m_fixhdr in m_defrag; m_defrag can't
deal with corrupted pkthdr.len counts.
MFC after: 3 days
Some of the calls to bus_dmamap_sync() were syncing the DMA descriptor
ring maps using the mbuf tag, when they should have been using the
descriptor ring tag instead.
check for raw IP system management operations is often (although
not always) implicit due to the namespacing of raw IP sockets. I.e.,
you have to have privilege to get a raw IP socket, so much of the
management code sitting on raw IP sockets assumes that any requests
on the socket should be granted privilege.
Obtained from: TrustedBSD Project
Product of: France
uma_zalloc) is called with exactly one of either M_WAITOK or M_NOWAIT and
that it is called with neither M_TRYWAIT or M_DONTWAIT. Print a warning
if anything is wrong. Default to M_WAITOK of no flag is given. This is the
same test as in malloc(9).
the "toss the largest process" emergency handling) from vm_map.c to
swap_pager.c.
The quantity calculated depends strongly on the internals of the
swap_pager and by moving it, we no longer need to expose the
internal metrics of the swap_pager to the world.
paging space and how much of it is in use (in pages).
Use this interface from the Linuxolator instead of groping around in the
internals of the swap_pager.
is not natural and needlessly exposes a lot of dirty laundry.
Move private interfaces between the two from swap_pager.h to swap_pager.c
and staticize as much as possible.
No functional change.
work when using a graphics chipset which identifies itself as
`VIA CLE266', used in some VIA EPIA boards. Two values need to be
patched in the VESA mode information structure: the widths of the modes
mentioned above are encoded in a format which was unknown to the VESA
module (and to my copy of the VBE spec.) whereas the window memory
segment values seem to be just incorrect.
I tested this on a VIA EPIA-M9000 and -M10000.
do not clear the `sb_sel' member of the sockbuf structure
while invalidating the receive sockbuf in sorflush(), called
from soshutdown().
The panic was reproduceable from user land by attaching a knote
with EVFILT_READ filters to a socket, disabling further reads
from it using shutdown(2), and then closing it. knote_remove()
was called to remove all knotes from the socket file descriptor
by detaching each using its associated filterops' detach call-
back function, sordetach() in this case, which tried to remove
itself from the invalidated sockbuf's klist (sb_sel.si_note).
PR: kern/54331
When a signal is being delivered to process, first find a sigwait
thread to deliver, POSIX's argument is speed of delivering signal
to sigwait thread is faster than other ways. A signal in its wait
set will cause sigwait to return the signal number, a signal not
in its wait set but in not blocked by the thread also causes sigwait
to return, but sigwait returns EINTR, sigwait is oneshot operation,
only one signal can be delivered to its wait set, when a signal is
delivered to the sigwait thread, the thread's sigwait state is canceled.
an appropriate error number after a failure condition.
In particular, three of the changed statements return ESRCH for a
failed pfind(), and in also three places a non-zero return
from p_cansee() will be passed back,
Also noticed by: rwatson
files, so that SWAP_META_PAGES does not vary either.
swap_pager.c ended up with a value of 16, everybody else 8. Go with
the 16 for now.
This should only have any effect in the "kill processes because we
are out of swap" scenario, where it will make some sort of estimate
of something more precise.
