PR/203585 this appears to have been broken by r235959, which predates
the ipfilter 5.1.2 import into FreeBSD.
The IPv6 checksum calculation is incorrect. To resolve this we call
in6_cksum() to do the the heavy lifting for us, through a new function
ipf_pcksum6(). Should we need to revisit this area again, a DTrace probe
is added to aid with future debugging.
PR: 203275, 203585
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20583
assumed the pfil hook registration performed in ipf_modload() would take
care of this. However ipf_modload() is only called when the ipl kld is
loaded or when ipfilter is first called when it is statically linked
into the kernel at build time.
Prior to this, even though r302298 has been in the tree for a while, it
has never been used. So, r302298 in reality begins now.
PR: 212000
Reported by: ahsanb@
MFC after: 1 month
This fixes META_MODE rebuilding since it assumes that it this is
a non-consistent build command. These are always unencoded consistently
though and do not need to use the .OODATE/$? mechanism.
MFC after: 2 weeks
Reported by: npn
Sponsored by: DellEMC
This was lost in r335910 for some reason.
This also fixes a META_MODE rebuild issue in some modules [1].
MFC after: 2 weeks
Reported by: npn [1]
Sponsored by: DellEMC
New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI
Reviewed by: cem
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20555
length to the difference of the two offsets that define the gap, to
avoid overflow, rather that adding the length to an offset and
comparing that to another offset.
This addresses an overflow issue reported by Peter Holm on i386.
Reported by: pho
Tested by: pho
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20594
When building a kernel supporting PSERIES but not POWERNV,
the compiler would complain about an error variable being
possibly used before being initialized.
In practice, however, this should never happen. In any case, it
is now initialized to an error value.
Before this change, OFW initrd (as md) handling code was simulating an ofwbus
device. But as there isn't really a Device Tree (DT) node representing OFW
initrd (it is specified in 2 properties under /chosen), its driver was in fact
stealing other driver's DT node. This was noticed after MD_ROOT_MEM became
default and QEMU's USB keyboard stopped working under VNC.
This change consists in simplifying the process of detection and mapping of
initrd memory, turning it into a simple startup step, instead of trying to
simulate a device.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20553
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
This change rights that comparison.
Reported by: pho
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20595
detection pins to the Marvell Xenon SDHCI controller.
These features are enable by 'vqmmc-supply' and 'cd-gpios' properties in the
DTS.
This fixes the SD Card detection on espressobin.
Sponsored by: Rubicon Communications, LLC (Netgate)
children of every entry on the search path as part of updating values of
the max_free field. By comparing the max_free values of an entry and its
child on the search path, the code can avoid accessing the child off the
path in cases where the max_free value decreases along the path.
Specifically, this patch changes splay_split so that the max_free field
of every entry on the search path is replaced, temporarily, by the
max_free field from its child not on the search path or, if the child
in that direction is NULL, then a difference between start and end
values of two pointers already available in the split code, without
following any next or prev pointers. However, to find that max_free
value does not require looking toward that other child if either the
child on the search path has a lower max_free value, or the current max_free
value is zero, because in either case we know that the value of max_free for
the other child is the value we already have. So, the changes to
vm_entry_splay_split make sure that we know all the off-search-path entries
we will need to complete the splay, without looking at all of them. There is
an exception at the bottom of the search path where we cannot rely on the
max_free value in the direction of the NULL pointer that ends the search,
because of the behavior of entry-clipping code.
The corresponding change to vm_splay_entry_merge makes it simpler, since it's
just reversing pointers and updating running maxima.
In a test intended to exercise vigorously the vm_map implementation, the
effect of this change was to reduce the data cache miss rate by 10-14% and
the running time by 5-7%.
Tested by: pho
Reviewed by: alc
Approved by: kib (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19826
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
for both the lower and upper bound modifications. Change the error returned
to ENOMEM. Rename the parameter size to len and make size a local variable
that stores the value of len after it has been modified.
This addresses concerns expressed by Bruce Evans after r348843.
Reported by: brde@optusnet.com.au
Reviewed by: kib, markj (mentors)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20592
This allows SDIO (through CAM) to attach to an upstream, e.g.,
..
sdhci_bcm0 pnpinfo name=mmc@7e300000 compat=brcm,bcm2835-mmc
sdiob0
..
Without this, upon trying to load sdio, we would panic with
"bus_add_child is not implemented".
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
These algorithms are deprecated algorithms that will have no in-kernel
consumers in FreeBSD 13. Specifically, deprecate the following
algorithms:
- ARC4
- Blowfish
- CAST128
- DES
- 3DES
- MD5-HMAC
- Skipjack
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20554
All of these algorithms are explicitly marked SHOULD NOT in one of these
RFCs.
Specifically, RFC 6649 deprecates all algorithms using DES as well as
the "export-friendly" variant of RC4. RFC 8429 deprecates Triple DES
and the remaining RC4 algorithms.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20343
While it is true that the new vmspace passed to vmspace_switch_aio
will always have a valid reference due to the AIO job or the extra
reference on the original vmspace in the worker thread, it is not true
that the old vmspace being switched away from will have more than one
reference.
Specifically, when a process with queued AIO jobs exits, the exit hook
in aio_proc_rundown will only ensure that all of the AIO jobs have
completed or been cancelled. However, the last AIO job might have
completed and woken up the exiting process before the worker thread
servicing that job has switched back to its original vmspace. In that
case, the process might finish exiting dropping its reference to the
vmspace before the worker thread resulting in the worker thread
dropping the last reference.
Reported by: np
Reviewed by: alc, markj, np, imp
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20542
Enable synaptics and elantech touchpads, as well as IBM/Lenovo TrackPoints
by default, instead of having users find and toggle a loader tunable.
This makes things like two finger scroll and other modern features work out
of the box with X. By enabling these settings by default, we get a better
desktop experience in X, since xserver and evdev can make use of the more
advanced synaptics and elantech features.
Reviewed by: imp, wulf, 0mp
Approved by: imp
Sponsored by: B3 Init (zeising)
Differential Revision: https://reviews.freebsd.org/D20507
misunderstanding that the function does not work additive
when repeatedly called for diffferent bands.
Reviewed by: avos (a few months ago)
MFC after: 2 weeks
When an HMI occurs a message event also gets created with the details of the
exception. Hook into the messaging framework to retrieve the HMI message.
Nothing is done with it yet, except to panic on unhandled exception.
vmem_xalloc() cannot be called while holding a nonblocking mutex, warned
by WITNESS. The lock may not be necessary in general, but it avoids
superfluous concurrent OPAL calls for the same sensor.
Reported by: pkubaj
32-bit machine, a len parameter just a few bytes short of 4G, rounded
up to a page boundary and hitting zero then, is not okay. Return
failure in that case.
Reported by: pho
Reviewed by: alc, kib (mentor)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D20580
The mcall_trap() dummy function is unused, and should be removed as we
are unlikely to support M-mode traps any time soon.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20494
Some of the config options that are disabled by default seem to be only
for historical reasons. Enable those that appear to no longer be
problematic. This includes WITH_CTF, STACK, GEOM_RAID, and re-enabling
blacklisted kernel modules.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20495
Most architectures print their total (real) and available memory during
boot. Properly initialize the realmem global and print these messages.
Also print the physical memory chunks (behind a bootverbose flag).
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20496
Add the enter and exit events, similar to what's found in
hammer_time() on amd64. We must use TSRAW as the pcpu isn't yet
initialized.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20497
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
Add strict checks for unused bit states in Elantech trackpoint packet
parser to filter out spurious events produces by some hardware which
are detected as trackpoint packets. See comment on r328191 for example.
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Sign bits for X and Y motion data were taken from wrong places.
PR: 238291
Reported by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
MFC after: 2 weeks
Spell all bits in the hex constants.
Since all lines are modified, consistently use <tab> after #define.
Reviewed by: alc (previous version), dougm
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D20560
that it becomes increasingly expensive to process a steady stream of
correctable errors. Additionally, the memory used by the MCA entries can
grow without bound.
Change the code to maintain two separate lists: a list of entries which
still need to be logged, and a list of entries which have already been
logged. Additionally, allow a user-configurable limit on the number of
entries which will be saved after they are logged. (The limit defaults
to -1 [unlimited], which is the current behavior.)
Reviewed by: imp, jhb
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20482
Apply a linker script when linking i386 kernel modules to apply padding
to a set_pcpu or set_vnet section. The padding value is kind-of random
and is used to catch modules not compiled with the linker-script, so
possibly still having problems leading to kernel panics.
This is needed as the code generated on certain architectures for
non-simple-types, e.g., an array can generate an absolute relocation
on the edge (just outside) the section and thus will not be properly
relocated. Adding the padding to the end of the section will ensure
that even absolute relocations of complex types will be inside the
section, if they are the last object in there and hence relocation will
work properly and avoid panics such as observed with carp.ko or ipsec.ko.
There is a rather lengthy discussion of various options to apply in
the mentioned PRs and their depends/blocks, and the review.
There seems no best solution working across multiple toolchains and
multiple version of them, so I took the liberty of taking one,
as currently our users (and our CI system) are hitting this on
just i386 and we need some solution. I wish we would have a proper
fix rather than another "hack".
Also backout r340009 which manually, temporarily fixed CARP before 12.0-R
"by chance" after a lead-up of various other link-elf.c and related fixes.
PR: 230857,238012
With suggestions from: arichardson (originally last year)
Tested by: lwhsu
Event: Waterloo Hackathon 2019
Reported by: lwhsu, olivier
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D17512