This commit adds support for MDIO present in the ThunderX SoC.
From the FDT point of view it is compatible with "octeon-3860-mdio"
however only C22 mode is used.
The code also implements lmac_if interface functions.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
- The driver consists of three main componens: PF, VF, BGX
- Requires appropriate entries in DTS and MDIO driver
- Supports only FDT configuration
- Multiple Tx queues and single Rx queue supported
- No RSS, HW checksum and TSO support
- No more than 8 queues per-IF (only one Queue Set per IF)
- HW statistics enabled
- Works in all available MAC modes (1,10,20,40G)
- Style converted to BSD according to style(9)
- The code brings lmac_if interface used by the BGX driver to
update its logical MACs state.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
This import brings following components of the Linux driver:
- Thunder BGX (programmable MAC)
- Physical Function driver
- Virtual Function driver
- Headers
Revision: 1.0
Obtained from: Cavium
License information: Cavium provided these files under BSD license
The interrupts-extended property is a list of controller-specific
interrupt tuples for more than one controller. The decode routine of
every PIC gets called in the pre-INTRNG code (nexus doesn't know which
device instance belongs to which fdt node), so the GIC code has to
check each FDT node it is asked to decode to ensure it is the owner.
Because in the pre-INTRNG world there can only be one instance of a GIC,
it's safe to cache the results of a positive lookup in a static variable
to avoid the expensive lookups on subsequent calls.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>
Differential Revision: https://reviews.freebsd.org/D2345
This is the last e26a5843 patch. The general thrust of the rewrite was
to move more responsibility for Memory Window and Doorbell interrupt
management from the ntb_hw driver to if_ntb.
A number of APIs have been added, removed, or replaced. The old
DB callback mechanism has been excised. Instead, callers (if_ntb) are
responsible for configuring MWs and handling their interrupts more
directly.
This adds a tunable, hw.ntb.max_mw_size, allowing users to limit the
size of memory windows used by if_ntb (identical to the Linux modparam
of the same name).
Despite attempts to keep mechanical name changes to separate commits,
some have snuck in here. At least the driver should be much more
similar to the latest Linux one now -- making porting fixes easier.
Authored by: Allen Hubbe
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
No functional change. Part of the huge rewrite (e26a5843).
Obtained from: Linux (e26a5843) (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
Move all Xeon secondary register setup to the setup_b2b_mw routine. We
use subroutines to make it a bit less wordy than the Linux version.
Adds a new tunable, 'hw.ntb.b2b_mw_share'. By default, it is off
(zero). If both sides enable it (any non-zero value), the NTB driver
attempts to use only half of a memory window for remote register MMIO
access.
This is still part of the large Linux rewrite (e26a5843).
Authored by: Allen Hubbe
Obtained from: Linux (e26a5843) (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
This Linux commit was more or less a rewrite. Unfortunately, the commit
log does not give a lot of context for the rewrite. I have tried to
faithfully follow the changes made upstream, including matching function
names where possible, while churning the FreeBSD driver as little as
possible.
This is the bulk of the rewrite. There are two groups of changes to
follow in separate commits: fleshing out the rest of the changes to
xeon_setup_b2b_mw(), and some changes to if_ntb.
Yes, this is a big patch (3 files changed, 416 insertions(+), 237
deletions(-)), but the Linux patch was 13 files changed, 2,589
additions(+) and 2,195 deletions(-).
Original Linux commit log:
Change ntb_hw_intel to use the new NTB hardware abstraction layer.
Split ntb_transport into its own driver. Change it to use the new NTB
hardware abstraction layer.
Authored by: Allen Hubbe
Obtained from: Linux (e26a5843) (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
Some interrupt-related function names changed to match Linux.
No functional change. Still part of the huge e26a5843 rewrite in Linux.
Obtained from: Linux (e26a5843) (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
No functional change.
Still part of the huge e26a5843 rewrite. I'm trying to make it less of
a complete rewrite in the FreeBSD version of the driver. Still, it
helps if our names match Linux.
Obtained from: Linux (e26a5843) (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
interrupt controller.
The latter is required for INTRNG, because of the hardware erratum
workaround installed by the linux folks into the imx6 FDT data, which remaps
an ethernet interrupt to the gpio device. In the non-INTRNG world we
intercept the call to map the interrupt and map it back to the ethernet
hardware (because we don't need linux's workaround), but in the INTRNG world
we lose the hookpoint where that remapping was happening, but we gain the
ability to work the way linux does by having the gpio driver dispatch the
interrupt.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: John Wren Kennedy <john.kennedy@delphix.com>
illumos/illumos-gate@52244c0958
In fact, only unrelated part of that commit is applicable:
8. zpool list -v doesn't print spares
It also doesn't correctly identify log devices.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: John Wren Kennedy <john.kennedy@delphix.com>
illumos/illumos-gate@52244c0958
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alexander Eremin <a.eremin@nexenta.com>
illumos/illumos-gate@8430278980
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alexander Eremin <a.eremin@nexenta.com>
illumos/illumos-gate@8430278980
and armv6 architecures. The primary enhancement over the old design is
support for hierarchical interrupt controllers (such as a gpio driver
which can receive interrupts from a root PIC and act as a PIC itself for
clients interested in handling a change of gpio pin state as an
interrupt). The new code also provides an infrastructure for mapping
interrupts described in metadata in the form of a "controller reference
plus interrupt number" tuple into the simple "0-n" flat numeric space
understood by rman and the bus resource mechanisms.
Use of the new code is enabled by setting the ARM_INTRNG option, and by
making a few simple changes to the platform's support code. In addition
each existing PIC driver needs changes to be ready for INTRNG; this commit
contains the changes for the arm/gic driver, which most armv6 SoCs use, but
it does not enable the new code yet on any platform.
This project has been many years in the making, starting as a GSoC project
by Jakub Klama (jceel@) in 2012. That didn't get committed right away and
the source base evolved out from under it to some degree. In 2014 I rebased
the diffs to then -current and did some enhancements in the area of mapping
interrupt numbers and storing associated fdt data, then the project went
cold again for a while. Eventually Svata Kraus took that work in progress
and did another big round of work on it, removing most of the remaining
rough edges. Finally I took that and made one more pass through it, mostly
disabling the "INTR_SOLO" feature for now, pending further design
discussions on how to most efficiently dispatch a pending interrupt through
more than one layer of PIC. The current code with the INTR_SOLO feature
disabled uses approximate 100 extra cpu cycles for each cascaded PIC the
interrupt has to be passed to, so what's left to do is about efficiency, not
correct operation.
Differential Revision: https://reviews.freebsd.org/D2047
5561 support root pools on EFI/GPT partitioned disks
5125 update zpool/libzfs to manage bootable whole disk pools (EFI/GPT labeled disks)
Reviewed by: Jean McCormack <jean.mccormack@nexenta.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
illumos/illumos-gate@1a902ef862
This is NOP changes for FreeBSD.
Refactor library decision for -fopenmp support from Darwin into a
function for sharing with other platforms.
Pull in r248424 from upstream clang trunk (by Jörg Sonnenberger):
Push OpenMP linker flags after linker input on Darwin. Don't add any
libraries if -nostdlib is specified. Test.
Pull in r248426 from upstream clang trunk (by Jörg Sonnenberger):
Support linking against OpenMP runtime on NetBSD.
Pull in r250657 from upstream clang trunk (by Dimitry Andric):
Support linking against OpenMP runtime on FreeBSD.
the name the function will have when the new ARM_INTRNG code is integrated,
and doing this rename first will make it easier to toggle the new interrupt
handling code on/off with a config option for debugging.
in through the stack pointer, however this may have been misaligned
causing some userland applications to crash. A workaround was committed in
r284707 where userland would check if the aux vector was passed using the
old or new ABI and adjust the stack if needed. As 4 months have passed it
is time to move to the new ABI, with the expectation the compat code in csu
and the runtime linker to be removed in the future.
Sponsored by: ABT Systems Ltd
down state.
Regression appeared in r287789, where the "prefix has no corresponding
installed route" case was forgotten. Additionally, lltable_delete_addr()
was called with incorrect byte order (default is network for lltable code).
While here, improve comments on given cases and byte order.
PR: 203573
Submitted by: phk
updated for large block support.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Joe Stein <joe.stein@delphix.com>
illumos/illumos-gate@e9316f7696
to illumos-gate 13967:92bec6d87f59
Illumos ZFS issues:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Joe Stein <joe.stein@delphix.com>
illumos/illumos-gate@e9316f7696
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@30925561c2
in vm_pageout_fallback_object_lock() and vm_pageout_page_lock(). The
check for the m->queue == queue assumes that the page does belong to a
queue.
Modify the 'unchanged' calculation bu dereferencing the marker tailq
pointers, which is known to belong to the queue. Since for a page m
linked to the queue, m->queue must be equal to the queue index, assert
this instead of checking.
In collaboration with: alc
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@30925561c2
bin/dd/tests
Ensure fdescfs is mounted on /dev/fd/ for the length testcase as it's used
in validating the characters read from /dev/zero
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
when -fstack-protector-strong is not available, like it was implicitly before
r288669
As noted by antoine@, devel/gcc (which is 4.8.5) lacks -fstack-protector-strong
support, whereas 4.8.4i (devel/gcc48) has the support.
Until a version is available which has -fstack-protector-strong support, be
conservative and only enable support with 4.9+.
Reviewed by: pfg
X-MFC with: r288669, r289465
Differential Revision: https://reviews.freebsd.org/D3924
value is defined as a config option the definition is emitted into
opt_global.h which is force-included into everything. In addition, the
symbol is emitted by the genassym mechanism, but that by its nature reduces
the value to a 0xnnnnnnnn number. When compiling a .S file you end up
with two different definitions of the macro (they evaluate to the same
number, but the text is different, upsetting the compiler).
Nothing has changed about this code for a while but the compile error is
new, so this must be fallout from the clang 3.7 update or something.
