device which makes the request for dma tag, instead of some descendant
of the PCI device, by creating a pass-through trampoline for vga_pci
and ata_pci buses.
Sponsored by: The FreeBSD Foundation
Suggested by: jhb
Discussed with: jhb, mav
MFC after: 1 week
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning. NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph". If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
r248917, r248918, r248978, r249001, r249014, r249030:
Remove multilevel freezing mechanism, implemented to handle specifics of
the ATA/SATA error recovery, when post-reset recovery commands should be
allocated when queues are already full of payload requests. Instead of
removing frozen CCBs with specified range of priorities from the queue
to provide free openings, use simple hack, allowing explicit CCBs over-
allocation for requests with priority higher (numerically lower) then
CAM_PRIORITY_OOB threshold.
Simplify CCB allocation logic by removing SIM-level allocation queue.
After that SIM-level queue manages only CCBs execution, while allocation
logic is localized within each single device.
Suggested by: gibbs
sys/arm and sys/mips), squelching the clang 3.3 warnings about this.
Noticed by: tinderbox and many irate spectators
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
PR: kern/177759
MFC after: 3 days
In some cases, kern_envp is set by the architecture code and env_pos does
not contain the length of the static kernel environment. In these cases
r249408 causes the kernel to discard the environment.
Fix this by updating the check for empty static env to *kern_envp != '\0'
Reported by: np@
the number of interior nodes, we always create a level zero interior node at
the root of every non-empty trie, even when that node is not strictly
necessary, i.e., it has only one child. This change is the first step in
eliminating those unnecessary level zero interior nodes. Specifically, it
updates all of the lookup functions so that they do not require a level zero
interior node at the root.
Reviewed by: attilio, jeff (an earlier version)
Sponsored by: EMC / Isilon Storage Division
This includes a new IOCTL to support a generic method for nvmecontrol(8) to pass
IDENTIFY, GET_LOG_PAGE, GET_FEATURES and other commands to the controller, rather than
separate IOCTLs for each.
Sponsored by: Intel
These were added early on for benchmarking purposes to avoid the mapped I/O
penalties incurred in kern_physio. Now that FreeBSD (including kern_physio)
supports unmapped I/O, the need for these NVMe-specific routines no longer exists.
Sponsored by: Intel
Having MIPS_MAX_TLB_ENTRIES defined to 128 is misleading, since it used
to be 64 in older releases of MIPS architecture (where it could be read
from Config1) and can be much more than 128 for the newer processors.
For now, move the definition to the only file using it (mips/mips/tlb.c)
and define MIPS_MAX_TLB_ENTRIES depending on the MIPS cpu defined. Also
add few checks so that we do not write beyond the end of the tlb_state
array.
This fixes a kernel data corruption seen in Netlogic XLP, which was casued
by tlb_save() writing beyond the end of tlb_state array when breaking into
debugger.
and kern.cam.ctl.disable tunable; those were introduced as a workaround
to make it possible to boot GENERIC on low memory machines.
With ctl(4) being built as a module and automatically loaded by ctladm(8),
this makes CTL work out of the box.
Reviewed by: ken
Sponsored by: FreeBSD Foundation
In case where there are no static kernel environment entries, the
function init_dynamic_kenv() adds an incorrect entry at position 0 of
the dynamic kernel environment. This in turn causes kenv(1) to print
and empty list even though there are dynamic entries added later.
Fix this by checking env_pos in init_dynamic_kenv() and adding dynamic
entries only if there are static entries.
it is being installed). Improve other error messages while here.
- Select special FPGA specific configuration profile when appropriate.
MFC after: 3 days
mbuf allocation fails, as in a case when ip_output() returns error.
To achieve that, move large block of code that updates tcpcb below
the out: label.
This fixes a panic, that requires the following sequence to happen:
1) The SYN was sent to the network, tp->snd_nxt = iss + 1, tp->snd_una = iss
2) The retransmit timeout happened for the SYN we had sent,
tcp_timer_rexmt() sets tp->snd_nxt = tp->snd_una, and calls tcp_output().
In tcp_output m_get() fails.
3) Later on the SYN|ACK for the SYN sent in step 1) came,
tcp_input sets tp->snd_una += 1, which leads to
tp->snd_una > tp->snd_nxt inconsistency, that later panics in
socket buffer code.
For reference, this bug fixed in DragonflyBSD repo:
http://gitweb.dragonflybsd.org/dragonfly.git/commitdiff/1ff9b7d322dc5a26f7173aa8c38ecb79da80e419
Reviewed by: andre
Tested by: pho
Sponsored by: Nginx, Inc.
PR: kern/177456
Submitted by: HouYeFei&XiBoLiu <lglion718 163.com>
Merge changes from illumos:
3021 option for time-ordered output from dtrace(1M)
3022 DTrace: keys should not affect the sort order when sorting by value
3023 it should be possible to dereference dynamic variables
3024 D integer narrowing needs some work
3025 register leak in D code generation
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This brings yet another feature implemented in upstream DTrace.
A complete description is available here:
http://dtrace.org/blogs/ahl/2012/07/28/my-new-dtrace-favorite/
This change bumps the DT_VERS_* number to 1.9.1 in
accordance to what is done in illumos.
This change was somewhat complicated because upstream is mixed many
changes in an individual commit and some of the tests don't really
apply to us.
There are also appear to be differences in timestamping with Solaris
so we had to workaround some assertions making sure no regression
happened.
Special thanks to Fabian Keil for changes and testing.
Illumos Revisions: 13758:23432da34147
Reference:
https://www.illumos.org/issues/3021https://www.illumos.org/issues/3022https://www.illumos.org/issues/3023https://www.illumos.org/issues/3024https://www.illumos.org/issues/3025https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 months
Merge bugfixes accepted and integrated by vendor. Underlying problems
have been reported by us and fixed in r240942 and r249196.
Illumos ZFS issues:
3645 dmu_send_impl: possibilty of pool hold leak
3692 Panic on zfs receive of a recursive deduplicated stream
MFC after: 8 days
Some failing disks tend to return vendor-specific ASC/ASCQ codes with
NOT READY sense key. It caused extremely long recovery attempts, repeating
these 120 TURs (it takes at least 1 minute) for every I/O request.
Instead of that use default error handling, doing just few retries.
Reviewed by: ken, gibbs
MFC after: 1 month
volumes behind a ciss(4) controller were being reported with malformeed
names and identifiers.
Repair that reporting by using the CAM values for the three SCSI indents
reported via camcontrol devlist
PR: kern/171650
Reviewed by: scottl
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
somewhere around svn r39402 to r39234.
I don't know of anyone who really wants to test these changes, but they
only remove the deprecated code in question. This shreds the driver down a
bit and *removes* options from the kernel configs.
These don't appear to be referenced in the man page, so no need to check it
there.
PR: kern/44587
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
