overridden at compile-time using kernel options of the same names.
Rather than doing a compile-time CTASSERT of buffer sizes being
even multiples of block sizes, just adjust them at boottime, as
the failure mode is more user-friendly.
MFC after: 2 months
PR: 119993
Suggested by: Scot Hetzel <swhetzel at gmail dot com>
exposed as kernel compile options, they have more meaningful names.
PR: 119993
MFC after: 2 months
Suggested by: Scot Hetzel <swhetzel at gmail dot com>
dump using mechanically generated/extracted debugging output rather than
a simple memory dump. Current sources of debugging output are:
- DDB output capture buffer, if there is captured output to save
- Kernel message buffer
- Kernel configuration, if included in kernel
- Kernel version string
- Panic message
Textdumps are stored in swap/dump partitions as with regular dumps, but
are laid out as ustar files in order to allow multiple parts to be stored
as a stream of sequentially written blocks. Blocks are written out in
reverse order, as the size of a textdump isn't known a priori. As with
regular dumps, they will be extracted using savecore(8).
One new DDB(4) command is added, "textdump", which accepts "set",
"unset", and "status" arguments. By default, normal kernel dumps are
generated unless "textdump set" is run in order to schedule a textdump.
It can be canceled using "textdump unset" to restore generation of a
normal kernel dump.
Several sysctls exist to configure aspects of textdumps;
debug.ddb.textdump.pending can be set to check whether a textdump is
pending, or set/unset in order to control whether the next kernel dump
will be a textdump from userspace.
While textdumps don't have to be generated as a result of a DDB script
run automatically as part of a kernel panic, this is a particular useful
way to use them, as instead of generating a complete memory dump, a
simple transcript of an automated DDB session can be captured using the
DDB output capture and textdump facilities. This can be used to
generate quite brief kernel bug reports rich in debugging information
but not dependent on kernel symbol tables or precisely synchronized
source code. Most textdumps I generate are less than 100k including
the full message buffer. Using textdumps with an interactive debugging
session is also useful, with capture being enabled/disabled in order to
record some but not all of the DDB session.
MFC after: 3 months
define a set of named scripts. Each script consists of a list of DDB
commands separated by ";"s that will be executed verbatim. No higher
level language constructs, such as branching, are provided for:
scripts are executed by sequentially injecting commands into the DDB
input buffer.
Four new commands are present in DDB: "run" to run a specific script,
"script" to define or print a script, "scripts" to list currently
defined scripts, and "unscript" to delete a script, modeled on shell
alias commands. Scripts may also be manipulated using sysctls in the
debug.ddb.scripting MIB space, although users will prefer to use the
soon-to-be-added ddb(8) tool for usability reasons.
Scripts with certain names are automatically executed on various DDB
events, such as entering the debugger via a panic, a witness error,
watchdog, breakpoint, sysctl, serial break, etc, allowing customized
handling.
MFC after: 3 months
captured to a memory buffer for later inspection using sysctl(8), or in the
future, to a textdump.
A new DDB command, "capture", is added, which accepts arguments "on", "off",
"reset", and "status".
A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to
resize the capture buffer and extract buffer contents.
MFC after: 3 months
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
longjmp to the default context. As result, "alltrace" command may
be prematurely terminated (without error message). This is happens,
for instance, when system is low on memory and referenced page in
kernel-mode thread stack is swapped out.
Protect "alltrace" against termination on trap by setting temporary
kdb_jmpbuf context.
Submitted by: Peter Holm
since they just duplicated the MI `reset' command. Instead of removing
them, make `reboot' an MI alias for `reboot' since this gives a better
way of killing the `r' alias for `reset'. Remove the `registers' command
that was used to kill the alias.
Turn the powerpc and sparc64 MD `halt' command into an MI command.
A copy of sparc64/db_interface.c grew in sun4v just after I found the
extra reboot commands. It has not been changed, and is now not
identical. Duplicated commands come out duplicated in ddb's online
help, but cause large problems when used (e.g., on i386's with 2 halt's
and an hwatch, typing h doesn' give the expected message about an
ambiguous command, but hangs like the halt command or a looping parseri
would).
suppression is only needed at ends of lines, but rev.1.32 forced it
off precisely there.
The --More-- prompt is now cleared by explicitly forcing out the
whitespace in "\r \r". It might be better to use the line
editor's clearing functions, but these are currently static and not
much different.
- `b' is now an official alias for `break'. It used to be an unofficial
alias, but this was broken by adding the `bt' alias for `trace'.
- `t' is now an official alias for `trace'. It used to be an unofficial
alias, but this was broken by adding the `thread' command.
- `registers' is now an alias for `show registers'. This is a hack to
break the unofficial `r' alias for `reset'. `r' really means
`registers' in some debuggers, so I sometimes type it accidentally and
am annoyed when it resets the system. A short command shouldn't have
such a large effect. Now at least `res' must be typed to disambiguate
`reset'.
output width of 79, only 6 columns of width 12 each fit, but 7 columns
were printed.
The fix is to pass the width of the next output to db_end_line() and
not assume there that this width is always 1.
Related unfixed bugs:
- 1 character is wasted for a space after the last column
- suppression of trailing spaces used to limit the misformatting, but
seems to have been lost
- in db_examine(), the width of the next output is not know and is
still assumed to be 1.
- Right justify 'pid' label.
- Move the uid column to the right 2 columns so that the 3 process id
columns (pid, ppid, pgrp) are grouped together.
- Expand the uid column to 5 chars.
- Don't indent the tid for multithreaded processes.
Requested by: bde (1, 2, 4)
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer). So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt. Also, now that it's easy to do so,
enable paging by default for all ddb commands. Any command that wishes to
honor the quit flag can do so by checking db_pager_quit. Note that the
pager can also be effectively disabled by setting $lines to 0.
Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
in parallel in several threads, one symbol lookup could
clear db_last_symtab when another one going to use it as
starting point for traversal.
Approved by: pjd (mentor)
MFC after: 1 month
now back to using fixed-size columns for output and each line of output
should fit in 80 columns on both 32-bit and 64-bit architectures. In
general the output is close to that of the userland ps(1) with the
exception that the 'wmesg' field is mostly similar to the "state" field
in top(1) in that it will show either a wmesg, a lock name (prefixed with
an *), "CPU xx" (for a running thread), or nothing if none of those three
conditions are true. It also respects td_name when listing threads in
a multithreaded process. There is a somewhat evilly-defined PTR64 macro
I use to make account for the change in the size of the 'wchan' column
in the formatted output (wchan is now the only pointer in the ps output
and is available so it can be passed to 'show sleepq', 'show turnstile',
or 'show lock').
- Add two new commands "show proc [process]" and "show thread [thread]"
that show details about the specified process or thread (specified
either by pid/tid or pointer), respectively. If an address it not
specified, it uses the current kdb thread.
take the addr value passed to a ddb command and attempt to use it to
lookup a struct thread * or struct proc *, respectively. Each function
first reparses the passed in value as if it was an ID entered in base 10.
For threads the ID is treated as a thread ID, for proceses the ID is
treated as a PID. If a thread or proc matching the ID is found, it is
returned. For db_lookup_thread(), if the check_pid argument is true and
it didn't find a thread with a matching thread ID, it will treat the ID as
a PID and look for a matching process. If it finds one it returns the
first thread in the process. If none of the ID lookups succeeded, then
the functions assume that the passed in address is a thread or proc
pointer, respectively. This allows one to use tids, pids, or structure
pointers interchangeably in ddb functions that want to lookup threads or
processes if desired.
table. Previously, the ddb code knew of each linker set of auxiliary
commands and which explicit command list they were tied to. These changes
add a simple command_table struct that contains both the static list of
commands and the pointers for any auxiliary linker set of additional
commands. This also makes it possible for other arbitrary command tables
to be defined in other parts of the kernel w/o having to edit ddb itself.
The DB_SET macro has also been trimmed down to just creating an entry in
a linker set. A new DB_FUNC macro does what the old DB_SET did which is
to not only add an entry to the linker set but also to include a function
prototype for the function being added. With these changes, it's now also
possible to create aliases for ddb functions using DB_SET() directly if
desired.
still works. Also, this is consistent with 'show pcpu' vs
'show allpcpu'. (And 'show allstacks' on OS X for that matter.)
- Add 'bt' as an alias for 'trace'. We already have a 'where' alias as
well, so this makes it easier for gdb-wired hands to work in ddb.
Ok'd by: rwatson (1)
Requested by: scottl (2)
MFC after: 1 day
- Make it so one can't call db_setup_paging() if it has already been called
before. traceall needs this, or else the db_setup_paging() call from
db_trace_thread() will reset the printed line number, and override its
argument.
This is not perfect for traceall, because even if one presses 'q' while in
the middle of printing a backtrace it will finish printing the backtrace
before exiting, as db_trace_thread() won't be notified it should stop, but
it is hard to do better without reworking the pager interface a lot more.
threads. This is quite useful if generating a debug log for post-mortem
by another developer, in which case the person at the console may not
know which threads are of interest. The output of this can be quite
long.
Discussed with: kris
MFC after: 3 days
pointer doesn't point to the first instruction of that function, but
rather to a descriptor. The descriptor has the address of the first
instruction, as well as the value of the global pointer. The symbol
table doesn't know anything about descriptors, so if you lookup the
name of a function you get the address of the first instruction. The
cast from the address, which is the result of the symbol lookup, to a
function pointer as is done in db_fncall is therefore invalid.
Abstract this detail behind the DB_CALL macro. By default DB_CALL is
defined as db_fncall_generic, which yields the old behaviour. On ia64
the macro is defined as db_fncall_ia64, in which a descriptor is
constructed to yield a valid function pointer.
While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing
(local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to
create a convenient maximum. By default this will be the legacy 10.
On ia64 we define this macro to be 8, for 8 is the maximum number of
arguments that can be passed in registers. This avoids having to
implement spilling of arguments on the memory stack.
Approved by: re (dwhite)
was satisified for the rest of the kernel on the i386 build except for
these two files. Rather than adding a submarine include to pcb.h, I've
added proc.h here.
I forgot to include these with the original commit. Sorry folks.
When a series of traces is included in a bug report, this will make it
easier to tie the trace information back to ps or threads output,
each of which will show the pid or the tid, but usually not both.
control the number of lines per page rather than a constant. The variable
can be examined and changed in ddb as '$lines'. Setting the variable to
0 will effectively turn off paging.
- Change db_putchar() to force out pending whitespace before outputting
newlines and carriage returns so that one can rub out content on the
current line via '\r \r' type strings.
- Change the simple pager to rub out the --More-- prompt explicitly when
the routine exits.
- Add some aliases to the simple pager to make it more compatible with
more(1): 'e' and 'j' do a single line. 'd' does half a page, and
'f' does a full page.
MFC after: 1 month
Inspired by: kris
