o Our diagnostic socket has its password set in the `set socket'
line only (not in ppp.secret).
o Passwords are per server socket (*VarAuthKey are gone)
o Authority is per prompt (VarLocalAuth is gone).
o Local logging is per prompt.
o Add a `show who' command to see who's connected. No identd
routine - just a `where the connection came from' display.
o SIGUSR1 is disabled for now - we have no way of choosing a
password for the socket created :-(
Prompts are attached as a list of `struct descriptor's in
struct bundle, and serviced under the bundles descriptor
service routines. Ultimately, everything should be done
like this.
Cosmetic:
o alphabeticalise SRCS in Makefile.
o Add a few comments in command.h
TODO: Start checking that we don't overflow the descriptor sets
in select() now that we can have any number of descriptors.
phase DEAD. They'll almost definitely have timed out
by the time we dial anyway.
o Log dial filters again (LogTCPIP).
o Make DEBUG diagnostics for filter checking actually mean
something to the common observer.
o Do our best to keep any already-configured IP numbers at
IPCP negotiation time. We always first request our configured
IP, and if the peer asks for an invalid IP, we NAK with HISADDR
Cosmetic:
o Add a linefeed to the `set timeout' arg count error message.
o Log unacceptable address errors to LogPHASE if LogIPCP is
switched off.
o Fix ``destination system not found'' error message.
o Get out immediately if we get a fatal error before entering
the main loop.
struct lcp and display them in `show lcp'.
o Remove `show mru' and `show mtu' and make the data part of
`show lcp'. Also merge `set m[tr]u' and `set openmode'
implementations into the SetVariable function.
o `set timeout' only accepts the idle timer value as an argument.
o Move our lqr period into struct lcp, and create a `set lqrperiod'
command. Display it in `show lcp'.
o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP,
CCP and IPCP levels, creating individual `set XXXretry' commands
for each. They must be separate because they have different
context requirements in multilink mode.
o Display default config values in `show ccp'.
o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and
explain the new commands.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
They're too resource-hungry and we have `owner pointers'
to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
(with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
in `term' mode (not just when logging debug) and
`show timers'. Only show timers every second in debug
mode, otherwise we get too many diagnostics to be useful
(we probably still do). Also, don't restrict ~m in term
mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol). This is both an
NCP and a type of struct link. It feeds off other NCPs
for output, passing fragmented packets into the queues
of available datalinks. It also gets PROTO_MP input,
reassembles the fragments into ppp frames, and passes
them back to the HDLC layer that the fragments were passed
from.
** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
weighting in multilink mode. Weighting is simplistic (and
probably badly implemented) for now.
o Remove the function pointers in struct link. They ended up
only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
struct mp's LCP and a speed equal to the sum of our link
speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
context and use ChooseLink() to decide on which `struct link'
to use. This allows behaviour as before when in non-multilink
mode, and allows access to the MP logical link in multilink
mode.
o Ignore reconnect and redial values when in -direct mode and
when cleaning up. Always redial when in -ddial or -dedicated
mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
o int modem was unused.
o StateNames[] is now accessed via State2Nam()
o ipKeepAlive is no more. As a result, we must call FilterCheck()
twice if we're doing TCP/IP logging (once when we queue and log
the packet and once when we transmit it and need to know if the
idle timer should be reset), but this won't be the case
in normal life.
Increment OutPackets for any packet - not just LQRs
MFC:
o Fix a few comment typos.
o Fix ``set timeout'' usage message and documentation.
o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's
so that they wrap correctly.
o Put the LQR in network byte order using the correct struct size
(sizeof u_int32_t, not sizeof u_long).
o Wrap LQR ECHO counters correctly.
o Don't increment OutLQR count if the last LQR hasn't been replied
to.
o Initialise last received LQR in StartLqm.
o Don't start the LQR timer if we're `disabled' and `accepted'.
o Generate LQR responses when both sides are using a timer and
we're not going to send our next LQR before the peers max timeout.
o Fix ``set timeout'' usage message and documentation.
o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's
so that they wrap correctly.
o Put the LQR in network byte order using the correct struct size
(sizeof u_int32_t, not sizeof u_long).
o Wrap LQR ECHO counters correctly.
o Don't increment OutLQR count if the last LQR hasn't been replied
to.
o Initialise HisLqrData (last received LQR) in StartLqm.
o Don't start the LQR timer if we're `disabled' and `accepted'.
o Generate LQR responses when both sides are using a timer and
we're not going to send our next LQR before the peers max timeout.
LQR should now be fully functional.
Struct bundle will have its own struct ccp in the future
too.
o The ``set stopped'' command now requires context and doesn't
work on the IPCP FSM.
o Check if it's time to break out of our top level loop before
doing a select - otherwise, we'll select forever :-(
o Remove `struct link'::ccp (a temporary hack). It turns out
that IpStartOutput() calls link_Output() and link_Output()
incorrectly calls StartOutput() (really modem_StartOutput)
requiring the ccp knowledge so that it can call
IpStartOutput()... The end result is that the whole IP
output queue gets dumped into the modem output queue
and a pile of physical writes are done prematurely. This
makes the (original) code in main() actually work in that
it would not bother selecting() on the tun descriptor when
our modem queue length was 20 or greater. Instead, we now
make that decision based on the overall queue length.
This will need improvement later.
o Move our LCP report timer into struct hdlc - it's really
a hdlc timer (fcs errors etc).
o Make `show hdlc' require context and make the output more
friendly.
o Remove all non-const globals from hdlc.c
o Output peer-rejected protocols by name - not just ones
that we reject.
is available, but LCP hasn't yet been started. We get to this
state in ``term'' mode.
Remove PacketMode(). LCP startup and shutdown is now controlled
by the datalink.
Add ``show links'' command.
Make ``close'' capable of running with and without a context.
Make ``down'' require a context.
Make ``set parity'' and ``set rtscts'' use the correct context.
datalink_Up() can now be told to skip the dial/login/hangup
scripts and can be told whether to enter packet mode when
entering the DATALINK_OPENED state.
This is a type of physical link that can chat and talk
LCP & CCP. A bundle contains a list of these (only one
in the list for the moment).
The datalink is a type of descriptor, and dials, enters
LCP (& does CCP), kicks the bundle when its FSMs do
something interesting and does the hangup chat script
on the way down. It also handles redials and reconnects.
There are lots of loose ends, and probably lots of bugs,
but the data structures are getting there !
Allow for NULL fd_sets in descriptor_UpdateSet()
Reimplement the entire chat module, creating
`struct chat' - a `type' of struct descriptor.
Remove CARRIER logging.
CONNECT logging now only logs "CONNECT" lines. CHAT logging
masks it with an entire log of the conversation.
Modem dialing is now asynchronous, including pauses
and timeouts :-)
The hooks in DoLoop() in main.c are *very* messy ! I'll have
to rewrite DoLoop fairly soon, so I don't care too much for the
moment. This code is pretty raw.
This will ultimately be a member of a list of descriptors and
their handler functions on which we need to select() in the
main loop.
o Make struct physical into a `sort' of struct descriptor.
o The FSM layering is now more sane.
o Move a lot of the NCP stuff into our ipcpstate rather than having it
in the bundle, including control of the configured IP addresses. We
don't need hacks like the global `linkup' variable any more as the
FSM decides when our ppp.link* files get run. This is going to eventually
be configurable based on FSM events anyway.
o Fix a few inconsistencies when both sides require authentication.
o We now have "Ppp..." and "PPp" prompts, reflecting authentication
and network phase. We don't print loads of spurious prompts as we
change phases any more.
o Our phase is part of the bundle now.
o Fix a bug where the FSM wasn't calling LayerFinish.
o Close the FSM down correctly with a signal rather than slamming it
down as if the line was dropped (the undocumented ``down'' command
is still available though).
o Remove the forgotten `tunno' variable and fix references to it.
This structure contains the asynchronous state of the physical
link.
Unfortunately, just about every .h file is included in every .c
file now. Fixing this can be one of the last jobs.
This structure will eventually contain a list of NCPs (currently
only IPCP is supported) and a list of physical `struct link's.
It will also derive from a struct link itself.
Make ModemTimeout() static - it's way to dangerous to be called
from outside !
Bump version to 1.9. Our first MP release should be 2.0.
IPCP, CCP and LCP are now just derived FSMs.
Comment each of the FSM implementations so that we can
tell what's going on.
Revise the state transitions so that CCP and IPCP actually
send terminate REQs when appropriate.
The OS & IPCP layers are still like spagetti (next job).
o Use INADDR_ANY and INADDR_BROADCAST instead of 0 and 0xffffffff
for IP addresses & masks.
o Move struct compreq into ipcp.c (it's none of anyone elses
business).
o Rename MAX_STATES to MAX_VJ_STATES.
Don't mention the authors name at startup. He's already credited
in the man page. Instead, make the message consistent with the
one given to the diagnostic port (and fix the grammar when entering
`term' mode).
Don't credit the zlib author in the man page as ppp isn't linked
directly with zlib (it's shared).
Mention when the OpenBSD port was first made available.
The delay defaults to 1 sec (as it always has) unless we've done
a ~p in interactive mode or we've actually detected a HDLC frame.
This is now cleanly implemented (via async timers) so that it is
possible for LCP to come up despite the delay if an LCP REQ is
received.
This will hopefully solve situations with slow servers or slirp
scenarios (where ECHO is left on the port for a second or so before
the peer enters packet mode).
Also, ~p in interactive mode no longer changes the value of the default
openmode delay and -dedicated mode enters packet mode in the right state
according to the value of openmode.
o Allow a forth argument in ppp.secret, specifying a new
label. This gives control over which section of
ppp.link{up,down} is used based on the authenticated user.
o Support random address ranges in ppp.secret (not just in ppp.conf).
o Add a AUTHENTICATING INCOMING CONNECTIONS section to the man page.
o Add a bit more about DEFLATE in the man page.
o Fix the incorrect "you must specify a password in interactive
mode" bit of the manual.
o Space things in the man page consistently.
o Be more precice about where you can use MYADDR, HISADDR and INTERFACE
in the "add" command documentation.
interactive mode.
Use `netfd' in fcntl() and tc[gs]etattr() calls rather than
the hard coded descriptor 0.
Use _FILENO constants from unistd.h
This un-breaks things after my recent `close(0)' in interactive
mode.
Close STDIN_FILENO, and open _PATH_TTY O_RDONLY as `netfd'. This
has the effect of allowing `show route' to output more than about
a page of data (on FreeBSD, not OpenBSD....). I have no idea why,
except that it was a direct consequence of the tcsetattr() in
TtyCommandMode(). My previous fix (closing descriptor 0) `fixed'
this because all calls to tcsetattr() failed :-(
RTM_CHANGE if the RTM_ADD fails with an EEXIST.
Allow "delete! dst" (note the ``!'') to silently
fail if the RTM_DELETE fails with an ESRCH.
Also, make the ESRCH and EEXIST error conditions
more understandable to the casual observer.
Show the IP range (if specified) in "show ipcp".
Close unused descriptors 0 and 2 in interactive mode.
Pass (size_t *) rather than (int *) to sysctl().
strcpy(a, b); /* a and b are the same size */
with
strncpy(a, b, sizeof(a));
a[sizeof(a)-1] = '\0';
Making the code `correct at a glance'.
Suggested by: Theo de Raadt <deraadt@cvs.openbsd.org>
when command logging is switched on.
o Display ******** for the authkey for "show auth"
o Document how \P should be used, and document the other chat escapes
while I'm there.
o Make sure the full command is displayed when a compound command
fails - ie, "set novar rubbish" should say "set novar: Invalid command"
rather than "novar: Invalid command"
Problem pointed out by: Theo de Raadt <deraadt@cvs.openbsd.org> (among others)
line is > LINE_LEN (512 bytes), we scribble (*blush*).
Hinted at by: Theo de Raadt <deraadt@cvs.openbsd.org>
Change sprintf(buf, "fixedstring") to strcpy(buf, "fixedstring").
Validate the peers suggested IP by attempting to make a routing table
entry.
Give up IPCP negotiation if the peer NAKs us with an unusable IP.
Always SIOCDIFADDR then SIOCAIFADDR when configuring the tun device.
Using SIOCSIFDSTADDR allows duplicate dst addresses (which we don't
want)!!!
Allow up to 200 interface names (was 50) (now that ppp can play server
properly).
Up the version number (1.5 -> 1.6).
Cosmetic:
Log unexpected CCP packets in the CCP log rather than the ERROR log.
Log unexpected Config Reqs in the appropriate LCP/IPCP/CCP log rather
than the ERROR log.
Log failed route additions and deletions with WARN, not TCPIP.
Log the option id and length for unrecognised IPCP options.
Change some .Sq to .Ar in the man page.
Delete AF_LINK routes as well as AF_INET.
Allow the word `default' as the arg to `delete' or in place of the
first two args (dest & netmask) to `add'.
Accept INTERFACE as the third arg to `add'.
You can now say `add default interface' to create a default route
through the tun interface. It's reported that subsequent bind()s
will bind to a broadcast address and not to the address currently
assigned to the tun device - this is the first step towards
supporting that first connection that was around from before the
dynamic IP negotiation....
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.
We can now survive a compile with
-Wall -Wbad-function-cast -Wcast-align -Wcast-qual
-Winline -Wmissing-declarations -Wmissing-prototypes
-Wnested-externs -Wpointer-arith -Wredundant-decls
-Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
o Add "allow" command:
"allow users a b c" gives access to users a, b and c.
"allow modes auto" gives those users access to auto mode only.
"allow users *" and "allow modes *" are accepted.
No users and all modes are allowed by default.
UID 0 can do anything.
o Set the current label with the "load" and "dial" commands
so that the call to ppp.linkdown makes sense.
o Up the verison number.
o Don't OR MODE_AUTO for -background and -ddial.
o Don't OR MODE_INTER when we get a diagnostic connection.
o Allow up to 40 args per line (was 20).
o "set ifaddr" only changes the interface in AUTO mode (with other
modes, it happens after IPCP negotiation).
o Sort command descriptions in the man page.
o Support -dedicated mode where we just talk ppp forever (no login etc).
Stay as the invoking uid as much as possible.
Execution as a normal user is still forbidden for now,
so these changes are pretty ineffective.
The next commit will implement the modifications suggested
on -hackers a number of days ago.
o Add missing $Id$s
o Move extern decls from .c -> .h files
o Staticize
o Remove #includes from .h files
o style(9)ify includes
o bcopy -> memcpy
bzero -> memset
bcmp -> memcmp
index -> strchr
rindex -> strrchr
o Move timeout.h -> timer.h (making it consistent w/ timer.c)
o Add -Wmissing-prototypes
file get created. We don't create lock files over non-tty
connections, but we *do* create lock files in -direct mode.
This leaves us capable of adding utmp/wtmp support for
successful pap & chap logins (coming soon).
o Output the correct device for "show modem"
while in -direct mode.
o Cosmetic: Moan a bit more when we can't open
the [modem] device.
o Call OpenModem() in a more "natural" way.
o Add some LogDEBUG in OpenModem().
Insist that uid == 0 for client ppp
Disallow client sockets if no password is specified
Don't exit on failure to open client socket for listening
Allow specification of null local password
Use reasonable size (smaller) ``vector''s in auth.c
Fix "passwd ..." usage message
Insist on "all" as arg to "quit" (if any)
Drop client socket connection before Cleanup() when "quit all"
This tells ppp to loopback packets addressed to
the ppp interface IP coming *from* the tun
device.
This means that you can ping the tun interface IP
from inside :-)
idependently time out any of the FSMs.
Split LCP logging into LCP, IPCP and CCP logging,
and make room in "struct fsm" for the log level
that the state machine should use.
"set stopped" directive. If the timeout occurs
it will cause a "Down" event, hanging up the line
if it's still up. This *isn't* part of the FSM
diagram, but I consider it ok as a "higher level
implementation specific timeout" as specified in
the rfc ;-}
Discussed briefly with: joerg
Catch SIGUSR1 to re-init listening socket.
Document signal behaviour.
Add missing '\n's to LogPrintf(LogWARN,...)
Main() returns int not void.
AF_LOCAL ideal suggested a long time ago by: joerg
unless defined out - including while a telnet
session with a -auto ppp is in effect. If you
don't create ppp.secrets, you deserve what you
get.
telnet connection capabilities will be configurable
per system soon.
Suggested by: Terry Dwyer <tdwyer@omen.net.au>
o Style police
o Make hangup abort the current connection, not
necessarily exiting (-auto/-ddial).
o Trap HUP and INT during DoChat and abort the
connection attempt. This means you can now
type "dial" and change your mind with ^C, or
HUP the process to stop it dialing.
Slapped into doing it by: Chuck Robey <chuckr@glue.umd.edu>
o Allow "set var" with no args to blank var (don't req "").
o Zero VarTerm ASAP if not in interactive mode.
o Never print anything to stdout in -direct mode.
o Count redial when failing to open modem.
o Increase device size to 40 characters (for host:port).
o Remove missed "if (fd == 0) fd = 1;".
o Don't give up on incoming non-terminal connections.
o Use syslog
o Remove references to stdout/stderr (incl perror())
o Introduce VarTerm - the interactive terminal or zero
o Allow "set timeout" to affect current session
o Change "set debug" to "set log"
o Allow "set log [+|-]flag"
o Make MSEXT and PASSWDAUTH stuff the default
o Move all #ifdef DEBUG stuff into the code - this
shouldn't be too much overhead. It's now controlled
with "set log +debug"
o Add "set log command, debug, tun, warn, error, alert"
o Remove cdefs.h, and assume an ansi compiler.
o Improve all diagnostic output
o Don't trap SIGSEGV
o SIGHUP now terminates again (log files are controlled
by syslog)
o Call CloseModem() when changing devices
o Fix parsing of third arg of "delete"
I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten. It'll follow soon.
alias commands simply won't work. Only root may specify the
location of the alias lib (otherwise, it's hard-coded).
Make logprintf silently fail if LogOpen hasn't been called.
Suggested by: eivind
of reconnect & -background.
o Fix reconnect anomolies.
o Make reconnect apply to failed LQR hangups (& mention in man page).
o Make reconnect effective in -background mode.
o Listen on socket in -background mode.
o Try all phone numbers in -background mode.
o Insist on system arg in -background mode.
o Make a control-connection close command exit in -background mode.
o Output status message to stdout on exit of parent in -background mode.
o Don't notify parent of success too soon.
o Describe termination EX_* code.
o Miscelaneous diagnostic corrections.
o Remove redundant connect_time from modem.c.
o Don't repeatedly DownConnection().
the connection after an unexpected loss of carrier:
set reconnect timer ntries
The man page warns against using this command when your
timeout value is slightly more than the other sides :{}
Suggested by: burton@bsampley.vip.best.com (Burton Sampley)
and quitting telnet immediately (while phone number dialed)
Log client connection/disconnection with PHASE_BIT now.
Add more error recovery on client disconnection
we need now.
Don't assume that file descriptor can't be 0 (many places)
Protect FD_* macros from being used with negative descriptors
Shorten MS EXT show help to fit 80 cols
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
to be used to expand things beyond the size of the buffer passed in. Also
do a general cleanup of sprintf -> snprintf as well as strcpy and strncat
safety. Also expand some buffers to allow for the largest possible data
that might be used.
This is a 2.2 candidate. However, it needs to be vetted on -current
since little testing has been done on this due to my lack of PPP on
this machine.
Reviewed by: Jordan Hubbard, Peter Wemm, Guido van Rooij
connecting to a host immediately in the foreground.
I would like to be able to run ppp from a script so that my script can be
sure that it is connected to the 'net before it continues running:
# Dial up the internet.
ppp -background myprovider || exit 1
do-some-net-command
# Hang up the modem.
kill -HUP `cat /var/run/ppp.tun0.pid`
Another problem is that the current ppp calls its process id file
`/var/run/PPP.server', which may conflict if you have more than one IP
tunnel interface available.
Closes PR#1469
Submitted by: Gord Matzigkeit <gord@enci.ucalgary.ca>
to keep the link up, so it re-dials whenever it detects the link go
down. This is useful for 'dedicated' links who use PPP.
It's been used for over a year w/out problems at different sites.
required. a core is not dumped at first connecting time and
dumped at second or third time. (patch I)
2. A routine for "show route" refers out of allocated space.
Values pointed by "lp" should be read as CHAR, I think.
there is also no free() for disallocation. (patch II)
Here is also a patch for an improvement: In current imprementation,
even if PPP connection is disconnected by time out, prompt of
interactive mode does not change from "PPP>" to "ppp>" to
indicate the disconnection on a terminal.
So I modified the code to do that. (patch III)
Submitted-By: NAKAMURA Motonori <motonori@econ.kyoto-u.ac.jp>
on their own without even attempting to get concensus in the IETF, but
there are also lots of Win95/NT boxes out there.
CLoses PR#1494
Submitted-By: Peter Childs <pjchilds@imforei.apana.org.au>
add some logging functionality which I find very useful.
'set debug link' will record just link up/down and address assignments.
'set debug connect' will record the entire chat dialog
'set debug carrier' will record just chat lines including 'CARRIER'
(so that I can be sure I'm getting a 28.8 line).
There was a global change required to permit LogPrintf to take a bit
mask instead of a bit position value (to permit logging some events
on either of two flags, so that no change in 'set debug lcp' would
result from the code supporting 'link'. Thus the diffs are rather
long for such a small change. The man page is also touched.
Oh, and there was a slight syntax problem in route.c
Reviewed by: phk
Submitted by: Tony Kimball <alk@Think.COM>
2) Improve on-line help subsystem
3) Make 'term' mode works even carrier dropped (old code
close line forever here)
4) Make 'term' mode 8bit clean.
5) Improve manual page
6) #ifdef DEBUG diagnostic about missing optional files.
7) Don't put interactive dialing info to logfile
A settable redial timer helps to avoid the problem where both ends
of a link want to dial at the same time and the line winds up busy
for both ends. The process id is logged in /var/run/PPP.system where
system is the name of the called system. When both ends of a link
are running in demand dial mode, you need an easy way to get the pid
of the ppp on the called end so it can be killed and re-started with
-direct or pppd started to handle the incoming ppp session.
2. Add secret description for "set timeout" to man.
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: John Capo <jc@irbs.com>
2. Optimize ModemQlen.
3. Sending ProtoReject for Unknow protocol (i.e. IPX)
4. Avoid select looping by reading tun under the high system load.
5. Adding Local version String for maintenance.
6. Just more speak rather silent ignore if you type invalid key words.
The first problem I found was that descriptor 0 was being closed.
This happens because the modem variable is set to 0 to indicate
that it is not valid but there are not enough tests for the modem
variable being 0. You can see where I have done this in the patch.
Code in OpenModem() dups the modem descriptor if it is < 3. Once
this happened the modem was always open and an incomming call would
have getty and ppp reading the modem.
Descriptor 1 is closed when the quit command was executed from a
telnet connection. The next modem open returns descriptor 1
and this gets duped leaving the modem always open again.
The modem was not being closed when the connection dropped or was
closed from the other end. The UUCP lock was also not removed if
the modem could not be opened.
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: John Capo <jc@irbs.com>
o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....
-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!
Reviewed by: Atsushi Murai (amurai@spec.co.jp)
