Commit Graph

112 Commits

Author SHA1 Message Date
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
c82f53f61d 'PC Card' instead of other variants 2005-09-22 06:01:44 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Poul-Henning Kamp
c711aea6ca Make a bunch of malloc types static.
Found by:	src/tools/tools/kernxref
2005-02-10 12:02:37 +00:00
Warner Losh
cbf6a317a5 Move the $NetBSD$ tag to the top of the file, per standard NetBSD
practice (which we seem to mostly follow in the tree).  Move the
$FreeBSD$ tag to its more proper place after all copyright and license
notices.  Add '-' to the copyright notice for Christian E. Hopps so my
copyright script picks it up.
2005-02-06 21:15:19 +00:00
Warner Losh
108663cc87 ccs is a size_t. RAY_CCS_INDEX takes ccs and does math on it,
resulting in a size_t due to C's rules of arithmetic.  Rather than
bogusly cast the result to a uint8_t, fix the printf format specifier
to have a 'z' modifier which tells the compiler that the sizes really
do match.

It turns out that change 1.75 was incorrect to assume that this
'really' was a 8bit quantity.  It isn't.  Although the hardware
appears to limit things to < 256, it would be a bug that should be
caught by debug printf it it were.  Casting it to uint8_t would have
lost this useful information.

Aslo add 'z' to a nearby debug statement that's never compiled in.
2005-02-06 21:12:22 +00:00
Warner Losh
fa9af110fd 64-bit clean fixes: Use %zx in preference to %x to print size_t items.
Cast a byte to uint8_t before printing.
2005-01-27 01:49:23 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Sam Leffler
db1d51f3c7 Update for net80211 changes. 2004-12-08 17:36:51 +00:00
Robert Watson
1d6aa1687f Since if_ray doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:39:07 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Alfred Perlstein
d602acc208 fix warnings. NULL -> 0 2003-12-24 19:00:49 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Sam Leffler
d7648a8288 update to new 802.11 support 2003-06-28 17:57:30 +00:00
Sam Leffler
2c71d3c795 update for new 802.11 support 2003-06-28 06:17:26 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Duncan Barclay
4becbcddc0 Retire some misleading comments and explain why we need to keep a copy
of parameters written to the card.
2003-03-05 18:13:19 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Alfred Perlstein
ebc82cbbf0 s/__attribute__((__packed__))/__packed/g 2002-09-23 06:25:08 +00:00
Alfred Perlstein
47f654d3a0 Fix warnings.
There's no need to use concatination when you have 'something.macro_arg'.
Comment out comment following #endif.
2002-06-01 18:50:35 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Duncan Barclay
60453b06de Primary purpose of this commit is to enable support for the Aviator
Pro and Raylink cards with version 5 firmware. Only infra-structure
mode has been tested. Specific changes for this feature are:

        o Add RFC1042 encapsulation of IP datagrams

        o Add authentication and association

        o Decode of the beacon (although not used)

Other changes have been made:

        o Pass command completion status to *_done (in place for
          adding proper error recovery)

	o Move a couple of state variables into the current
	  network parameters structure. This is in prep. for
	  dealing with roaming.

MFC after:	1 week
2001-05-17 22:23:49 +00:00
Duncan Barclay
3f36f543ff Eliminate some panics for errors we can recover from.
Reduce the verbose memory map setup reports and work with pccardd to
set the common memory map up.

Use enumeration values for CARD_SET_RES_FLAGS.

Use DELAY when spinning waiting for the card to come free instead of a loop.

MFC:	after 1 week
2001-05-09 00:03:19 +00:00
Duncan Barclay
9dc1f83dc8 Remove if_ray_oldcard.h because pccard support multiple windows now.
Setup attribute memory resource in ray_probe so that it is added to
the print out of the resource list on card insertion.
2001-05-07 13:11:08 +00:00
Duncan Barclay
a6a0d91dba pkh's TAILQ changes to if_mutliaddrs missed a counting loop. 2001-03-04 20:56:45 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Poul-Henning Kamp
37d4006626 Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
Poul-Henning Kamp
78d82c8c59 Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
Duncan Barclay
a07736d0f6 Take advantage of the fixes to the pcic code that allows multiple
active memory maps. This removes the need to change the memory
map from common to attribute every time a packet is sent/received.

This increases performance and decreases cpu load (ping times on
slow machines improve by about 1.5ms).

Move out the old common memory/attrbiute memory hack functions to a
new header file to tidy up the main code. I want to keep them available
for a while.
2001-01-17 17:55:00 +00:00
Warner Losh
486d464d74 o Now that I've had time to test the new interface, reintegrate it back in.
o Fix OLDCARD to use the new interface.
o Rename the offsetp argument to deltap to more closely reflect what it
  is returning (it returns the delta from the requested value to the actual
  value).
o Remove duplicate $FreeBSD$ in pccbb.c
o Allow deltap to be NULL.
o Convert new isa pcic driver and add XXX comments that this function isn't
  actually implemented there (which means that NEWCARD pccard stuff won't
  work there until it is).
o Revert attempts to make old inferface work in NEWCARD.

Subitted by: peter (Parts of the new version code)
2001-01-07 16:31:09 +00:00
Duncan Barclay
2ae2c42c38 Tidy up if_init routine so that it does not return an error. 2001-01-02 20:29:25 +00:00
Bill Paul
b1f3daafde Fix probe/attach a little. We don't have to call bpfattach() anymore
since ether_ifattach() does it for us. We do need to call ether_ifdetach()
instead of if_detach(). And we don't have to check for ifp->if_name
already being initialized because it never will be in FreeBSD 4.x and
above.

Reviewed by:	Warner Losh, Duncan Barclay
2000-12-08 21:35:11 +00:00
Warner Losh
3e8e7863b2 Changes necessary to make this work.
The prior version in the tree was repo-copied from Duncan Barclay's
cvs tree.

Also add $FreeBSD$

Submitted by: Duncan Barclay
Committed-via: raylan link with two webgear cards.
2000-11-12 21:43:52 +00:00
Duncan Barclay
6b55e51be0 Add attribute memory setup warnings 2000-07-11 21:31:59 +00:00
Duncan Barclay
766748ceac Move newbus detection code to alloc routines.
Work around pccard nasties.
2000-07-07 19:13:11 +00:00
Duncan Barclay
cbe16a893d Subtle Tx bugs - I wonder why the cast wans't picked up... 2000-06-21 21:37:27 +00:00
Duncan Barclay
a8cef3390b Minor tweaks to error messages (after writing man page).
Renamed varible dst in ray_rx to mp as it is a pointer to an mbuf.

Correctly grok addresses in data packets.

Promte a couple of RECERRs to real errors.
2000-06-20 20:14:29 +00:00
Duncan Barclay
ce5163041d Remove RECERR from RAY_DEBUG 2000-06-18 21:41:24 +00:00
Duncan Barclay
0218cb013b General tidy up and plough through TODO list.
Rewrote intro at top of file to reflect my better understanding of how it
the memory mapping works.

Clear the DONE list and move some thoughts into the TODO list.

Remove RECERR from RAY_DEBUG

Start to use a desired network parameter structure, only used in download
code as I've realised that there are some problems with the idea.

Break up ray_rx, and move the data packet handler into a seperate function. This meant some knock on changes in ray_rx_mgt/ray_rx_ctl to do with
mbuf freeing.

Remove some debug code/XXX comments that are out of date.
2000-06-18 21:40:46 +00:00
Duncan Barclay
b248ba3a75 Add a desired network parameter structure to runq entries. 2000-06-18 21:10:58 +00:00
Duncan Barclay
da5777391d Suck out all of the current and desired n/w parameters. 2000-06-11 13:57:59 +00:00